- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
yes. I'm going to be ending the sale real soon though, so you may want to order while they are cheap.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
FS: Mohgasm Linear Drivers
- Thread starter Mohrenberg
- Start date
Blord
0
- Joined
- Dec 24, 2007
- Messages
- 5,356
- Points
- 0
Are these blank host or with printed "Aurora Cree" on it ?
***Oeps*** Should be in C6 sales thread
***Oeps*** Should be in C6 sales thread
Last edited:
- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
Believe they will be the blank ones.
It's from the same people Yobresal buys his from.
It's from the same people Yobresal buys his from.
Last edited:
LaZeRz
0
- Joined
- Feb 19, 2011
- Messages
- 2,549
- Points
- 63
??? These are drivers.
- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
Whoops i thought we were in the aurora c6 kit thread lol
LaZeRz
0
- Joined
- Feb 19, 2011
- Messages
- 2,549
- Points
- 63
You have way too many good deals for us and yourself to keep up with.
Last edited:
- Joined
- Jul 13, 2011
- Messages
- 38
- Points
- 6
Payment sent for 5 drivers set to 1.25A. Thanks.
The driver board does show LD+ & LD- pins but I do not see the Batt+ & Batt- pins.
Is that right?
Batt+ ----------- LD+
Batt- ----------- LD-
The driver board does show LD+ & LD- pins but I do not see the Batt+ & Batt- pins.
Is that right?
Batt+ ----------- LD+
Batt- ----------- LD-
- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
on the other side is labeled Vin & Gnd for your battery input
Vin = +
Gnd = -
Vin = +
Gnd = -
- Joined
- Jul 13, 2011
- Messages
- 38
- Points
- 6
i bet the voltage input is the same as Jib's driver right?
- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
yuppp
- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
I've revamped the OP.
I've added individual Paypal links for each driver option, so you don't have to mess with leaving a note when buying.
I also added a driver kit option for those who enjoy soldering their own drivers together.
I've added individual Paypal links for each driver option, so you don't have to mess with leaving a note when buying.
I also added a driver kit option for those who enjoy soldering their own drivers together.
eytyxhs
0
- Joined
- Nov 3, 2010
- Messages
- 2,069
- Points
- 0
If at all possible you should heat sink both.
When heat sinking one side, I always go for the IC. Simply because that is what everyone does so I just follow the crowd.
When assembled with reflow soldering, these things withstand 450 degrees Fahrenheit (232C), so they aren't too easily damaged.
The boards came in today. I'll be shipping off pending orders over the next day or two.
Holy Sh**t!
I'll take some.
Dude I just bought two of your 1.25A drivers for my FIRST and second builds LoL. Just gotta work out now what I can pair them up with.?????
Was thinking of a 445 in a 2 x CR123a host like the C6 but hell I dont know if that will be enough power will it?
This was maybe a bit ambitious for my first build (I'm just a noob that got carried away) I dont have much soldering skill. But hell I just gotta tin it all up and join some wires right?
Will I have much room in that host? It looked like it had a long reflector housing until I saw it up against the 18650.
I have no idea how to heatsink the driver though (so if I need to?) whats the best way to do that?
Thanks
Was thinking of a 445 in a 2 x CR123a host like the C6 but hell I dont know if that will be enough power will it?
This was maybe a bit ambitious for my first build (I'm just a noob that got carried away) I dont have much soldering skill. But hell I just gotta tin it all up and join some wires right?
Will I have much room in that host? It looked like it had a long reflector housing until I saw it up against the 18650.
I have no idea how to heatsink the driver though (so if I need to?) whats the best way to do that?
Thanks
Last edited:
- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
2xCR123 will work fine in a C6.
http://laserpointerforums.com/f39/fs-aurora-c6-kits-68348.html
normally, i machine the top of the pill flat, and then use thermal epoxy to heat sink the driver to the pill.
http://laserpointerforums.com/f39/fs-aurora-c6-kits-68348.html
normally, i machine the top of the pill flat, and then use thermal epoxy to heat sink the driver to the pill.
- Joined
- Dec 28, 2010
- Messages
- 280
- Points
- 0
Normal 16340s may be able to handle 1.25A.
I got some secondhand ones that couldn't for longer than a couple minutes.
I now run 445s at 1.6-1.8A with these batteries:
AW IMR16340 550 mAh IMR CR123 size LiMN Rechargeable Lithium Battery
These little beasts have insane discharge rates, I won't ever use another 16340
As far as room, the Aurora C6 host has plenty for your build. You will get a better idea when you order a host and heatsink
Ill let someone more qualified than I suggest heatsinking, as I have no experience with Moh's driver.
-Oops, Moh beat me to it!
I got some secondhand ones that couldn't for longer than a couple minutes.
I now run 445s at 1.6-1.8A with these batteries:
AW IMR16340 550 mAh IMR CR123 size LiMN Rechargeable Lithium Battery
These little beasts have insane discharge rates, I won't ever use another 16340
As far as room, the Aurora C6 host has plenty for your build. You will get a better idea when you order a host and heatsink
Ill let someone more qualified than I suggest heatsinking, as I have no experience with Moh's driver.
-Oops, Moh beat me to it!
Last edited:
Cheers mate
Being a noob I just bought the C6 "just add diode" kit figured it would just be easier to have as a first project. Guess I'll be keeping these drivers for another day.
