FS: 800mw 532nm PL-E Pro, 2W+ Kryton Groove, Glasses and More!

Warning: Quite a few pictures!


Hey all, I've recently come into some financial troubles so I'm going to sell some stuff I've accumulated through my dealings on LPF.

Before listing my items, I would like to get payment information done. Paypal accepted only. Cash will work, but will only ship upon receipt. Will accept money from high-rep members as purchase of item, but otherwise, must be paypal gift. Middle-man welcomed, buyers expense. Prices do not include paypal fees but include shipping fees.


#0 - Just added 2W 450nm Laser. This was one of the first laser's I ever acquired. It has served me well. Focusable, but around the same as the other 9mm diodes. Don't expect the beam to be "focused to infinity". Great for burning, can ignite typical white paper, and obviously matches.. Asking $150 PRICE DROP: $130 PRICE DROP 12/16/14 48 HOUR SALE$99 Shipped!





#1 - SOLD First up 4x 16340 Tenergy Batteries with Car Charger and Wall charger - $25 shipped


#2 - SOLD Secondly, 2W+ Kryton Groove made by Grainde. Bought a couple weeks ago. Specs copied from him: (Same as what he's selling right now)


#3 - SOLD Eagle Pair Glasses 190-540nm & 800-2000nm OD4


#4 - SOLD 2 "S1" lenses. Give me a reasonable offer, and I'll accept it. Want to sell together preferably.



#5 - SOLD Niwalker Nova MM15 5223 Lumen Flashlight.

Amazing condition, I already have one high-powered flashlight, so its needless to have two. I don't know a whole lot about it, search the specs online. Sold for 219.95 on amazon. Asking for 180? PRICE DROP $160



#6 - SOLD Green laser around 50mw? Asking $15 shipped. Good laser.



#7 - SOLD And finally, my beauty, the 800mw PL-E Pro from Jetlasers.

I don't what else to say. This laser is incredible. I would love to keep it, but its too extravagant Laser is in excellent condition.

It was LPMed by Gray at 920mw. Sells for $739 on Jetlasers.com

EDIT: Comes with two tailcaps. One is missing a safety switch, and thus, disfunctional. Pics and beamshots below:


Message me for any questions or concerns!
:wave:

Pm'd on PL-E Pro

jdawg said:

#5 - Niwalker Nova MM15 5223 Lumen Flashlight.

Amazing condition, I already have one high-powered flashlight, so its needless to have two. I don't know a whole lot about it, search the specs online. Sold for 219.95 on amazon. Asking for 180?

Comes with Lanyard, extra o-ring, handle with missing screws (If you have spare screws you're good, I don't)

Click to expand...

Did you actually BUY it on Amazon?

Seems a bit coincidental, because there was someone on the forum a few months ago selling a Niwalker MM15 for $140, that was also missing those same screws.....

rhd said:

Did you actually BUY it on Amazon?

Seems a bit coincidental, because there was someone on the forum a few months ago selling a Niwalker MM15 for $140, that was also missing those same screws.....

Click to expand...

I didn't buy on Amazon. I just meant they sell it for that much anyways, always open to offers..

Pm Sent for eagle pair....

Im very sorry to hear about the tail cap issue, again. I thought we had sorted that out? If there was still a problem, I would have been happy to look at it.

Anyway for the sake of clarity I will post all details on this purchase for a prospective buyer. The laser was purchased for $ 240 shipped and sent on the 25.09.2014, so a couple of months ago. The buyer had an issue with the tail cap and I refunded a couple of dollars for a few replacement switches. If the new buyer would like me to look at, it I will happily fix it for free, they just need to cover postage.
The specs on this laser are also slightly different to the lasers on sale at the mo.:

9 mm 445 diode
X-Drive V6 Buck @ 2.3 A - This has a Foulmist iDRV3 @ 2.4 A
Normal use 2 x 16340/18350. 1 battery runs @ approx. 300 mA
G9 Lens
Copper heatsink on driver
Additional copper coin sink on diode for improved heatsinking of diode - This has only recently been introduced on the new batches.

As there is a question about the power I will also offer a power check. This laser was one of last remaining from my original sales thread and was sold as a 2.8 W (peak was IIRC 2.9 W?). I sincerely doubt that the power would have dropped to 2 W over 2 months, if duty cycles were followed. I stand behind my products and so I will also offer to replace the diode for the new buyer, should it actually be below 2 W. Please note that even 1 W will burn paper, so Im a little confused here. Perhaps there is an issue with focusing?

I have had a couple of issues with the switches to date, so I will have a look around for some better switches for future builds. The ones Im currently using were recommended by Moh and supplied by him.

Good luck with the sale:beer:

grainde said:

Im very sorry to hear about the tail cap issue, again. I thought we had sorted that out? If there was still a problem, I would have been happy to look at it.

Anyway for the sake of clarity I will post all details on this purchase for a prospective buyer. The laser was purchased for $ 240 shipped and sent on the 25.09.2014, so a couple of months ago. The buyer had an issue with the tail cap and I refunded a couple of dollars for a few replacement switches. If the new buyer would like me to look at, it I will happily fix it for free, they just need to cover postage.
The specs on this laser are also slightly different to the lasers on sale at the mo.:

9 mm 445 diode
X-Drive V6 Buck @ 2.3 A - This has a Foulmist iDRV3 @ 2.4 A
Normal use 2 x 16340/18350. 1 battery runs @ approx. 300 mA
G9 Lens
Copper heatsink on driver
Additional copper coin sink on diode for improved heatsinking of diode - This has only recently been introduced on the new batches.

As there is a question about the power I will also offer a power check. This laser was one of last remaining from my original sales thread and was sold as a 2.8 W (peak was IIRC 2.9 W?). I sincerely doubt that the power would have dropped to 2 W over 2 months, if duty cycles were followed. I stand behind my products and so I will also offer to replace the diode for the new buyer, should it actually be below 2 W. Please note that even 1 W will burn paper, so Im a little confused here. Perhaps there is an issue with focusing?

I have had a couple of issues with the switches to date, so I will have a look around for some better switches for future builds. The ones Im currently using were recommended by Moh and supplied by him.

Good luck with the sale:beer:

Click to expand...

Thanks grainde! This is by no means doubting your quality, tailcap was harmed by me, when I dropped it. As for the power, I'll advertise it as 1.5w. Anyways, I'm lowering the price and opening to offers..

How are you guys shipping 2W and 800mW lasers around the US? I'm an enthusiast from Canada and everywhere I look it says anything over a pathetic 5mW is illegal (including the US). Is there something I am missing or is it just unlikely to be detected during shipping?

P.S. Interested in that green 50mW if I like the answer to the above.

^^^ Hmm smells like the FDA...

Damn that did seem like bait, but I'm sure if I was the FDA I would be less conspicuous and might have some idea about how your shipping system works

Please note that even 1 W will burn paper

Click to expand...

this one is having a little trouble turning white paper to flames

Click to expand...

1W will burn paper yes, but I've been unable to IGNITE white paper with 1W. in my experience, a minimum of 1200-1300mW is needed to do this, so if this one struggles but can still ignite, it's probably between 1200 and 1500mW

I'll take the glasses if RYDorDIE278 doesnt

^^^Theres no point in guessing, get it LPMed.:beer:

In the spirit of the commercial gimmicks of modern society, everything is 10% for cyber monday.

PM Sent

Kryton Groove and glasses sold! Thanks guys.

2 more items sold, just the lenses, Nova MM15, and JL Pl-E 800mw left. Thanks!

Just added another laser, #0!