daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
There doesn't seem to be too much interest here. Imma close this and figure out something else to do with them.
I put together three TWO 445nm modules. They have the diode from the XJ-A130. They have the Groove2 driver. They are putting out 400mW with the 405-G-1 lens. They will ship with the stock acrylic lens to protect the diode. You will NEED to get either a 405-G-1 lens or an AixiZ 405 glass lens.
These are made to be installed in your finished project. The Groove2 is a linear driver. You will need to power these with 7.2V-12V. You will also have to provide significant heat sinking for them.
They are $120, shipped in the US
SOLD This laser has the 445nm diode from an XJ-A140. It has a V5 flexdrive. The driver is set to 500mA. It is putting out 500mW with the 405-G-1 lens It will ship with the acrylic lens to protect the diode, but you will need a 405-G-1 or an AixiZ glass lens for it.
The MXDL uses three primary (standard) AAA batteries. The MXDL has the massive Jayrob heat sink in it.
For this last MXDL/Jayrob host I will stay with the old school price. It will ship in the US for $190.
While I have the thread open, I also have four three 250mW red burning modules available for $35 each
Peace,
dave
I put together three TWO 445nm modules. They have the diode from the XJ-A130. They have the Groove2 driver. They are putting out 400mW with the 405-G-1 lens. They will ship with the stock acrylic lens to protect the diode. You will NEED to get either a 405-G-1 lens or an AixiZ 405 glass lens.
These are made to be installed in your finished project. The Groove2 is a linear driver. You will need to power these with 7.2V-12V. You will also have to provide significant heat sinking for them.
They are $120, shipped in the US
SOLD This laser has the 445nm diode from an XJ-A140. It has a V5 flexdrive. The driver is set to 500mA. It is putting out 500mW with the 405-G-1 lens It will ship with the acrylic lens to protect the diode, but you will need a 405-G-1 or an AixiZ glass lens for it.
The MXDL uses three primary (standard) AAA batteries. The MXDL has the massive Jayrob heat sink in it.
For this last MXDL/Jayrob host I will stay with the old school price. It will ship in the US for $190.
While I have the thread open, I also have four three 250mW red burning modules available for $35 each
Peace,
dave
Last edited:
great deal though. love the host.:beer:
