FS: 200mW+ 532nm, 750mW 650nm, ~5mW 473nm lab modules, B+W anamorphic prism pairs

I have a few lasers sitting around that I don't need so I'm gonna sell them to fund a future project. I'm gonna list them cheap here, and if they don't sell they will go up on eBay.

Here are the lasers, I apologize for the messy room but I have been in laser mad scientist mode all day.



They all have TTL/Analog (rated 30kHz) modulation and run on 12V.

The 750mW 650nm unit comes with it's own 110VAC to 12VDC power supply. It clearly is run on a c-mount diode and has a fat, square beam. It runs at about 800mW stable on my meter. I'll let it go for $150 shipped to the US.

The 200mW green 532nm unit has a nice thin, round beam, and runs near 230mW. I want $175 shipped for this one.
And last is a 500mW 445nm module. It runs at about 650mW. I want $80 shipped for it. ***SOLD***




Also have some anamorphic prism pairs from the B+W tech units. $20 + shipping. IIRC these have been used with the multimode 635nm diodes to correct beam output.

I do also have some >1W 808nm c-mount pump diodes and 473nm crystal sets that are pulls from those units that I'd be willing to sell. The c-mount diodes are good for at least 1W and are probably rated for 2W, and come mounted to a really nice TEC. I want $10 per diode. The crystal sets are sealed and also mounted to a TEC, and are rated for 10mW. I have pushed one as high as 80mW before. I want $10 a piece for these also.

I also have a working 473nm B+W labby with PSU that I'd sell for $40. I don't have access to my meter right now but I'd guess that it outputs 5mW after a minute warm up. It has a TEM00 beam. The power supply runs on 5V. You'll need a lens of some sort to focus the beam because it is pretty divergent as is. I use the cheap projector lenses you can get from DTR's shop.

Re: FS: Lab Modules (750mW 650nm, 200mW 532nm, 500mW 445nm) + B+W anamorphic prism p

Where'd you get that large prism? Been looking for a larger one but they are all ridiculously priced.

Not a bad deal on these either. Id snag them all if I wasnt trying to buy a RGB prebuilt

Re: FS: Lab Modules (750mW 650nm, 200mW 532nm, 500mW 445nm) + B+W anamorphic prism p

I will take the blue one... If you.could PM me your PP information that would be great!
I can pay you asap.

:beer:
-Matt

The duty cycle on these are infinite right? I'm not familiar with labs, as this will by my first one

Re: FS: Lab Modules (750mW 650nm, 200mW 532nm, 500mW 445nm) + B+W anamorphic prism p

Aw how did i miss this I just purchased a lab green elsewhere. Good luck with your sale.

Re: FS: Lab Modules (750mW 650nm, 200mW 532nm, 500mW 445nm) + B+W anamorphic prism p

Livinloud said:

Where'd you get that large prism? Been looking for a larger one but they are all ridiculously priced.

Not a bad deal on these either. Id snag them all if I wasnt trying to buy a RGB prebuilt

Click to expand...

I'm not sure where it came from, WIRED magazine gave it to me after we did a photoshoot with it.

KRNAZNBOY said:

I will take the blue one... If you.could PM me your PP information that would be great!
I can pay you asap.

:beer:
-Matt

The duty cycle on these are infinite right? I'm not familiar with labs, as this will by my first one

Click to expand...

PM sent!

Re: FS: Lab Modules (750mW 650nm, 200mW 532nm, 500mW 445nm) + B+W anamorphic prism p

aypal:

Re: FS: B+W anamorphic prism pairs, and 750mW 650nm lab module

Updated, only the 650nm lab module and the B+W anamorphic prism pairs remain. I do also have some >1W 808nm c-mount pump diodes and 473nm crystal sets that are pulls from those units that I'd be willing to sell.

Re: FS: B+W anamorphic prism pairs, and 750mW 650nm lab module

Guys heads up, totally not a bad thing, but these modules are WAY SMALLER than they look.

They are just compact

Like 4"L x 2"W x 2"H

Re: FS: B+W anamorphic prism pairs, and 750mW 650nm lab module

I didn't mean for the picture to be misleading! Yes they are pretty small but can run 100% duty cycle without issue. Did you get your laser fired up?

Re: FS: B+W anamorphic prism pairs, and 750mW 650nm lab module

KRNAZNBOY said:

Guys heads up, totally not a bad thing, but these modules are WAY SMALLER than they look.

They are just compact

Like 4"L x 2"W x 2"H

Click to expand...

That is a soldering iron on the table you know

Re: FS: B+W anamorphic prism pairs, ~5mW 473nm labby, and 750mW 650nm lab module

Dude when i saw 650mw 445nm for $80 with no duty cycle, do you think i cared about how it looked and how big it was? I didn't even look at the pic i went STRAIGHT to my PM box to message drake lol

Seriously, i though it was a good deal. Got it today works like a charm.

styropyro said:

I didn't mean for the picture to be misleading! Yes they are pretty small but can run 100% duty cycle without issue. Did you get your laser fired up?

Click to expand...

Yep, and no its not your fault lol. I LOVE IT! Smaller is better in my opinion...

Yep fired it up, does it need to warm up to reach full output? Or do i need to get my lpm fixed, cause it read 580mw. I have the same problem with my PL445 -1600. Offroadfreak measured it at 2 watts and i can only get 1860mw out of it on my meter... Should get that checked....

THANKS STYRO!

:beer:
-Matt

Re: FS: B+W anamorphic prism pairs, ~5mW 473nm labby, and 750mW 650nm lab module

Shots of my setup:

Nice little hacked together 12v power supply. Has a RCR connector and lights up when power is available. Press the switch to supply power through aligator clips



ON:



MANGO:

Re: FS: B+W anamorphic prism pairs, ~5mW 473nm labby, and 750mW 650nm lab module

Mango provides much more attenuation in the lower wavelength side of the visible spectrum than your typical laser goggles. Plus, they smell better! :wave:

Re: FS: B+W anamorphic prism pairs, ~5mW 473nm labby, and 750mW 650nm lab module

I think I will start putting a mango in every one of my pictures, because they are awesome!

Look good
Smell good
Feel good
Taste good

Unfortunately, a laser only provides the first of the 4

BUT, they make up for it in many ways.

:beer:
-Matt

Re: FS: B+W anamorphic prism pairs, ~5mW 473nm labby, and 750mW 650nm lab module

Are there any of the 473nm crystal sets still available ?

Re: FS: B+W anamorphic prism pairs, ~5mW 473nm labby, and 750mW 650nm lab module

Right now I have someone interested in all four crystal sets that I have available, but if he backs out I'll let you know!

@KRNAZNBOY I'm glad to see the laser is running nicely for you!