andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
i might be looking to sell ym 10k scanners with dmx.
anyone interested for £60?
anyone interested for £60?
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
FS 10k scanners + DMX
- Thread starter andy_con
- Start date
- Joined
- Sep 28, 2007
- Messages
- 1,520
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
Where did you get them and do you have something to build them into that you don't mind selling?
Where did you get them and do you have something to build them into that you don't mind selling?
- Joined
- Mar 2, 2008
- Messages
- 1,500
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
yeah i would be intereted for 120$ usd
What all can a 10k do ??
yeah i would be intereted for 120$ usd
What all can a 10k do ??
- Joined
- Jul 27, 2007
- Messages
- 3,642
- Points
- 63
Re: Feeler - FS 10k scanners + DMX
10kpps is really pretty much bottom end as far as galvos are concerned - you're pretty much limited to beamshows and some basic geometric shapes as far as actual image and animation is concerned
Wesdaman14 said:
10kpps is really pretty much bottom end as far as galvos are concerned - you're pretty much limited to beamshows and some basic geometric shapes as far as actual image and animation is concerned
andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
well a metal housing and aluminium plate will be extra.
and yes 10k are bottom on the speed rating, they can do beam shows and simple animations
lamborgini8 said:
well a metal housing and aluminium plate will be extra.
and yes 10k are bottom on the speed rating, they can do beam shows and simple animations
andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
these are the 10k scanners in question, planning on upgrading to 30k, so wont need thr 10k anymore.
http://www.laserpointerforums.com/forums/YaBB.pl?num=1218488773
these are the 10k scanners in question, planning on upgrading to 30k, so wont need thr 10k anymore.
http://www.laserpointerforums.com/forums/YaBB.pl?num=1218488773
- Joined
- Sep 28, 2007
- Messages
- 1,520
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
If the scanner you show in that thread is the one you are selling and your willing to sell the metal chassis as well, how much would you want for the lot?
andy_con said:
If the scanner you show in that thread is the one you are selling and your willing to sell the metal chassis as well, how much would you want for the lot?
andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
well the housing is £10 from maplin and the alum plate is about £15-20
well the housing is £10 from maplin and the alum plate is about £15-20
- Joined
- Sep 28, 2007
- Messages
- 1,520
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
Got a link to that? I have seen that housing posted about everywhere but never found it on maplin.
The scanner has ILDA right?
I think you may have yourself a deal then.
andy_con said:
Got a link to that? I have seen that housing posted about everywhere but never found it on maplin.
The scanner has ILDA right?
I think you may have yourself a deal then.
- Joined
- Jul 24, 2008
- Messages
- 1,415
- Points
- 36
Re: Feeler - FS 10k scanners + DMX
all galvo scanners are capable of "ilda"
all that means is you can wire it up to a ilda standard serial port.
all galvo scanners are capable of "ilda"
all that means is you can wire it up to a ilda standard serial port.
- Joined
- Sep 28, 2007
- Messages
- 1,520
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
What I means was ILDA connections already set up, last thing I want is to have to play around with the 26 or so wires and connect them up myself.
thesk8nmidget said:
What I means was ILDA connections already set up, last thing I want is to have to play around with the 26 or so wires and connect them up myself.
- Joined
- Jul 24, 2008
- Messages
- 1,415
- Points
- 36
Re: Feeler - FS 10k scanners + DMX
What I means was ILDA connections already set up, last thing I want is to have to play around with the 26 or so wires and connect them up myself.[/quote]
the only way to get everything already wired for ilda and setup for you would be to buy a premade scanner.
with your scanners you will have a total of 4 signal wires that you will have to hook up to your serial port(ilda connector.)
1,14,2,15
lamborgini8 said:
What I means was ILDA connections already set up, last thing I want is to have to play around with the 26 or so wires and connect them up myself.[/quote]
the only way to get everything already wired for ilda and setup for you would be to buy a premade scanner.
with your scanners you will have a total of 4 signal wires that you will have to hook up to your serial port(ilda connector.)
1,14,2,15
andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
well im keeping my existing metal housing and alum board.
if you want a housing and board, il go maplin and get one and get a alum plate cut.
you will have to do the rest, wire, cut holes etc...
if you want me to do that, thats gona cost more.
well im keeping my existing metal housing and alum board.
if you want a housing and board, il go maplin and get one and get a alum plate cut.
you will have to do the rest, wire, cut holes etc...
if you want me to do that, thats gona cost more.
- Joined
- Sep 28, 2007
- Messages
- 1,520
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
Hmm, well I think I am going to leave this one for now.
andy_con said:
Hmm, well I think I am going to leave this one for now.
andy_con
0
- Joined
- May 24, 2007
- Messages
- 3,394
- Points
- 0
Re: Feeler - FS 10k scanners + DMX
if you want a box all set up so all you have to do it put a laser in, its gona cost.
but the cheap way is for you get set the case and do it your self, its not that much work
if you want a box all set up so all you have to do it put a laser in, its gona cost.
but the cheap way is for you get set the case and do it your self, its not that much work
