- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
You don't have to setup a google checkout account to purchase through google checkout from what I understand. You should be able to just use your credit card or bank card like any other site.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Computer Parts Anybody?
- Thread starter MrDusanMandic
- Start date
You don't have to setup a google checkout account to purchase through google checkout from what I understand. You should be able to just use your credit card or bank card like any other site.
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
Added 2 more processors, will add more here in a few hours.
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
Last call on the computer parts! I'm accepting pretty much ANY offers! Trades are always welcome!
been years since i actually logged on here, but i couldn't help but checking out the cpu's
its a conroe, so 65nm, 65w tdp, 4m cache, socket 775. a comparable processor today is the e3300, which has less cache, but higher clockspeed, lower real tdp, fsb, 45nm, and overclocks MUCH better.
considering all that, i would love to offer a Pentium D 2.8ghz with an gigabyte 945gz motherboard for trade, or $30. i also have an nvidia 8500gt, some OCZ Reaper ram, and a 400gb 2.5" SATA WD Blue HD that's seen very little use.
if anything sticks out to you, please send me a PM
its a conroe, so 65nm, 65w tdp, 4m cache, socket 775. a comparable processor today is the e3300, which has less cache, but higher clockspeed, lower real tdp, fsb, 45nm, and overclocks MUCH better.
considering all that, i would love to offer a Pentium D 2.8ghz with an gigabyte 945gz motherboard for trade, or $30. i also have an nvidia 8500gt, some OCZ Reaper ram, and a 400gb 2.5" SATA WD Blue HD that's seen very little use.
if anything sticks out to you, please send me a PM
Last edited:
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
Which chip are you referring to? I have a few listed.
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
the e6550
$30 sounds good. Currently I can only accept google checkout or cash/check via mail. Google checkout is really easy, you can pay with pretty much any type of credit card.
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
No other offers? I'm open to ALMOST anything! Aixiz modules, "basic" laser pointers, diodes, etc.. Just let me know what you have!
- Joined
- May 4, 2009
- Messages
- 5,443
- Points
- 113
Thanks for the fine 18650's
actually i DO have one more thing to offer. i have a functioning 200mw laser that needs a new power source (formerly an RC car battery, or 8AA's in a radioshack box.)
it overheated whilst charging a few weeks ago and the aixis module has gone bad for sure. but the driver works perfectly, and accepts a 9v input from a power cord and has leads to accept a battery.
interested? it looks rough and might need work but its up for grabs lol.
EDIT: looked it over again, and it needs a few leads resoldered. but when i held them in place, the laser did work, although was distorted by the aixis module.
oh. its a Kenom built driver with one of Senkat's diodes
it overheated whilst charging a few weeks ago and the aixis module has gone bad for sure. but the driver works perfectly, and accepts a 9v input from a power cord and has leads to accept a battery.
interested? it looks rough and might need work but its up for grabs lol.
EDIT: looked it over again, and it needs a few leads resoldered. but when i held them in place, the laser did work, although was distorted by the aixis module.
oh. its a Kenom built driver with one of Senkat's diodes
Last edited:
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
actually i DO have one more thing to offer. i have a functioning 200mw laser that needs a new power source (formerly an RC car battery, or 8AA's in a radioshack box.)
it overheated whilst charging a few weeks ago and the aixis module has gone bad for sure. but the driver works perfectly, and accepts a 9v input from a power cord and has leads to accept a battery.
interested? it looks rough and might need work but its up for grabs lol.
EDIT: looked it over again, and it needs a few leads resoldered. but when i held them in place, the laser did work, although was distorted by the aixis module.
oh. its a Kenom built driver with one of Senkat's diodes
I'm interested. Any pics of it? I can send my item overnight to your address, could you send that overnight?
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
No offense, but I think I'll pass on that. Looks like it's a little more work than I'm wanting to get into.
It's yours for $30 if you still want to do that though. Just let me know, I can ship it out right now if we work something out quickly. I'll even ship it overnight for no extra charge.
It's yours for $30 if you still want to do that though. Just let me know, I can ship it out right now if we work something out quickly. I'll even ship it overnight for no extra charge.
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
understand completely lol
yeah ill do $30
MW1111, I've sent you a PM. If we work this deal out quick enough, I can send this out today and send it FedEx Express overnight for FREE!!
- Joined
- Mar 4, 2010
- Messages
- 149
- Points
- 0
Taking ALMOST ANY OFFER ON ANYTHING LEFT!!! Just make an offer, you never know what I'll take. I want to get rid of EVERYTHING!
Starting today, I'll ship any item for FREE! FedEx Express Overnight!
One lucky person will even get shagged! Don't know what shagged is? I'll pick one random person and give them a few extras with their order. Could be a $10 item to a $100 item!
Starting today, I'll ship any item for FREE! FedEx Express Overnight!
One lucky person will even get shagged! Don't know what shagged is? I'll pick one random person and give them a few extras with their order. Could be a $10 item to a $100 item!
