Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Close Out Sale- WL E2 532nm & Lazerer 532nm Stick- UPDATED 9/28

Joined
Feb 21, 2013
Messages
5,013
Points
0
TRADES AND OFFERS ARE WELCOME!!!!!

Want to buy a 9mm diode for a JayRob Mag Build ;)

***NEW***
(dont want to clutter with mass photos so PM for further photos. They are already uploaded so will be quick to send)

WL (hate saying that word) E2 Evo- As normal, its under-spec but still a good laser for a starter or someone interested in a lower output 532nm. Does 43mW average with 14500/dummy and 33mW with standard 1.5V AA. Really has never been used minus testing. Bought as leftover stock since this was discontinued and replaced with the "core". Bought with the intent of tearing it completely down and putting a 638nm in it but way to busy with work so it has only been tested :(

On hold



Last is a laser I REALLY dont want to sell but will if there is no interest in my other lasers. This is the FIRST "high" powered laser I ever bought so have a soft spot for it. Averages 115mW with 127mW peak. Runs off a single 18650 battery. Has a threaded head for effect caps if purchased. Has rarely been used since I got my 2W from Blord only a few days after this one and then my 400mW LaserBtb so this greenie has been neglected :(

Want $60 shipped



Wow i realized that all my low powered lasers have been neglected with the addition of the G series lens to Blord's laser and my LaserBtb 400mW arriving :( I need to go play with my low powered lasers tonight!

Buyer MUST be 18+ years of age, knowledgeable of laser safety and able to provide proof of proper safety glasses. Please be aware of your local laser laws and custom regulations since I am not held responsible for confiscated lasers. This laser is yours the moment it is packed and will be packed in memory foam to ensure safe delivery. international shipping is extra but dont mind shipping anywhere in the world! I reserve the right to refuse sale to anyone I don't feel responsible enough to own a laser. Payment for anyone under 10 rep power is required via PP gift.

Shipping will be 2-3 day flat rate, tracked and insured for $50. Additional insurance is provided by the buyer. Paypal gift is the preferred payment method, normal paypal payment, just add the pp fee

This is a killer little builds that will make a perfect addition to any collection or the start of one :D

First come first serve; I am going by time stamp of either PM or replies here. Serious buyers with funds ready only, Im not in the mood to play games of I want it but can you hold it for xx days until I get a pay check? Also not interested in down payments to hold a laser. Its too much of a hassle for me and isnt worth it, sorry.

Thanks for reading :beer:
 
Last edited:





Joined
Feb 21, 2013
Messages
5,013
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

Reserved for updates:

Anyways, I am selling two of my lasers, both in C6 hosts: 445nm doing 2.16W with a STOCK 3 ELEMENT LENS and a 650nm doing 285mW. Yes you read correctly the 445nm has a stock lens and does 2.16W, Jordan sent me a very lucky diode :D I am selling them individually or as a package deal if you want to save some money.

I am selling one of the most efficient M140 builds around. I would keep this for myself and sell my 501b built by Blord but that is the first high powered laser I bought so has to stay in my collection! This has the same host as the 650nm, unmarked C6 host. This laser has a copper heat sink to help deal with the heat from the M140 diode. It is driven by a 1.8A Mohgasm driver and runs off 2x16340 (haven't tested it on 1x18650 but theoretically it should work). I am happy to test this out if the buyer would like. Comes with a Moh custom focus adapter as well but buyer gets choice of black anodized or unanodized. Just built this laser in the middle of the month and have only used it during LPM tests. Been WAY too busy with my new job to enjoy my lasers :(

I am asking NOT FOR SALE shipped for just the laser. If you are interested in buying the 445nm AND the case, it will be NOT FOR SALE shipped. I own another of these cases and have 7 lasers in it not including 5 pen lasers.

If you are interested in buying the 445nm and 650nm then it will be NOT FOR SALE shipped. If you are interested in the 445nm, 650nm AND case then it will be NOT FOR SALE shipped and come with some gifts :D

First is the C6 650nm. I built this laser a few months back and literally have NEVER used it other than testing it. I have a valid reason though, I dont have any safety glasses to cover the red spectrum :( I have tested this laser on a brand new Delta Rubicon LPM and the graph is below.

650nm is from Jordan and is driven at 328mA from a Mohgasm driver. Is pictured with the stock aixiz focus lens but will come with a Moh custom focus adapter (as seen on the 445nm but will be unanodized). Heat sink is anodized black with an unmarked C6 host for the blacked out sinister look that pops great with the red beam :D

I am asking no longer for sale

***NEW***
I am selling my ZY-T13 thrower flashlight as well. It is a Crelant 7G5CS replica or clone. The 7G5CS is a $115 light from Crelant. This light performs identical to the 7G5CS but has a XML T6 emitter for a more pleasant tint to the eyes. This light will throw a beam 200 yards and also has a good amount of spill so overall its a great light. Light is in new condition minus a few scratches/nicks that came from the factory. Light is capable of lockout as well which is a huge plus for a budget light. Im asking SOLD shipped CONUS. PM for photos
 
Last edited:
Joined
Feb 21, 2013
Messages
5,013
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

I REALLY NEED to sell these now.......Just purchased a new LED smart TV today :eek: TOO MUCH MONEY has been spent this past week!!!!!!
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

:bumpit: Since I am in need of the money, I may be willing to hold one or both of these lasers if the buyer is 100% interested and can secure the funds within a reasonable time.

Please PM me to discuss
 
Joined
Mar 29, 2013
Messages
1,221
Points
63
Re: FS: 2.16W 445nm & 285mW 650nm

Best of luck with the sale! I have been having trouble selling things too lately :( not enough interest......

Anyways, good luck! This is an AMAZING deal! Someone is sure to snatch it up soon.

:beer:
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

Thank pal, I feel people are in the same situation as me; spent too much and now need to stop spending or sell some things off. I know its a lot of money but it really is a killer deal when you think about it......2.1W with a stock lens means it should do 2.5W with a G series lens :D :D So for $30 more you can pump this laser to 2.5W!
 
Joined
Mar 29, 2013
Messages
1,221
Points
63
Re: FS: 2.16W 445nm & 285mW 650nm

Lol im on a streak of bad luck. My 9mm 445nm is doing 2.6w at 2.4 amps.

WTF? :wtf:
 
Joined
Jan 14, 2011
Messages
3,816
Points
63
Re: FS: 2.16W 445nm & 285mW 650nm

I think the age of selling complete lasers is at an end, to be honest. More and more people are figuring out that it's really easy to do builds like this for a lot cheaper.
 
Joined
Mar 29, 2013
Messages
1,221
Points
63
Re: FS: 2.16W 445nm & 285mW 650nm

Yea but even selling hosts and host kits is hard. Its ridiculous. Check out my inventory reduction sale. Everything is priced to go really fast bu still, no takers!

Augg, so frustrating. I hope livinloud get more luck.
 
Joined
Jan 14, 2011
Messages
3,816
Points
63
Re: FS: 2.16W 445nm & 285mW 650nm

What I have learned is that this is a hobby. I don't really sell anything laser related anymore. Just drivers.
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

Haha yeah thats funny.......in reality prices are going up on laser parts. Apex and Blord are still selling pre-builts like crazy. Moh and Cajun have shut down so now there is really only one place to get drivers and even those drivers are flashlight drivers so in reality the only place to get a laser driver is to build your own. You can use a cheap flashlight driver in your expensive laser if you want but personally Id never do that.

Then top it off with luck of draw on diodes.......not very often will someone get a diode this efficient. normally a m140 driven at 1.8A will get 1.5-1.7W so with a G1 lens it will do 2.1W. Mine is capable of doing 2.5-2.6W with a G1 lens. Look at Krnaznboy, his 9mm driven at 2.4A is only doing 2.6W when those are capable of doing 3.5W!!!!!

Not saying that people arent learning how to build laser but you are also seeing tons of members posting problems with their lasers; killed the diode, killed the driver, diode is flickering, etc.....

I dont think pre-built lasers are coming to an end, especially with the threat of the FDA cutting down on lasers. Parts will be near impossible to come by and pre-builts lasers that people already own will be the only way to buy a laser.

People can buy a laser now at normal price or they can wait until the FDA cracks down on lasers and prices sky rocket! If these lasers dont sell then ill keep them in my collection, no big deal. id just rather sell them now and help pay off my recent purchases. Plus I dont have a need for 2x 2W+ 445nm so the 445nm will be for sale until sold unless I have a change of mind and decide to keep this efficient BEAST!
 
Joined
Jan 14, 2011
Messages
3,816
Points
63
Re: FS: 2.16W 445nm & 285mW 650nm

Eh. Well, at least my drivers will be back on the market in the coming weeks. DTR and his cousin will be stocking them.
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

Ah well that is actually GOOD news to me!!!! I was starting to run out of my stock of drivers (have like 2 or 3 left) and was afraid I was going to have to start building them. Dont have the time to build drivers with my new job so this is good news. Please let me know when you get them in stock :beer:
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

:bumpit: offers welcome now.......need to sell
 
Joined
Jun 13, 2012
Messages
65
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

$150 shipped for the 445nm?

Just putting it out there.
 
Joined
Jul 1, 2013
Messages
1,169
Points
0
Re: FS: 2.16W 445nm & 285mW 650nm

I think the age of selling complete lasers is at an end, to be honest. More and more people are figuring out that it's really easy to do builds like this for a lot cheaper.
its not a an end by far I'm about to put a WTB for lasers in Australia as soon as the mods hopefully approve it if you where in Australia i wouled take both in a heart beat ....customs etc is an all consuming issue, will i actually get the lasers I'm really interested i nearly bought before just wish there was a almost certain way they would arrive ...i may bite the bullet on them ...would you give me a day 2 at max to see what response i get from my WTB I'm about to post in Australia ?
 




Top