All gone

These are 5......3 Complete modules from 10X blu-ray burners. The module is an aixiz. The lens is the aixiz glass 405nm AR. The driver is the new Dr. Lava Groove drive II. The driver is set to the upper range. The upper range can go up to 600mA. All of these modules are set at around 400mW. If you would like a specific current with these just ask and it shall be set. If you would like the module to be made either case positive or case negative just ask. I will solder the case pin to the respective power input lead. These are ready to go. Simply apply power to the + and - lead wires and you will have a cool 400mW of 405nm. All of the dangerous soldering has been done.
Here is a breakdown of the work put into these.
Diode extracted from heatsink,
PCB desoldered from diode pins
Diode pressed into module
Diode and driver fit up aligned and tinned
Diode pins soldered to driver
Lead wires soldered to driver
High range on driver solder set
Modules tested for functionality.
I am asking $219 for these complete modules shipped in the USA.
Edit: Focus rings are not attached but will be included as well as the spring.

Re: 10X Complete Modules

What input voltage do these require?

Re: 10X Complete Modules

Driver voltage dropout is 1.2 Volts so minimum diode voltage +1.2v. In this case Diode voltage being around 5.5 I believe. Someone please correct me on this. I don't remember the exact minimum voltage input of these diodes.

Re: 10X Complete Modules

The rest of the sled is already gone. Sorry.

Re: 10X Complete Modules

Wow! Thats a very reasonable price yobresal.
You must have got a good, bulk buy deal on those 10x drives.

Re: 10X Complete Modules

Man Luke, those are a STEAL for that price. If I had the cash, I'd get one to replace the 6 X I have in my Jayrob MICRO CHROME build. You should have NO problem selling these at all. Especially for that price. rob

Re: 10X Complete Modules

Thanks Rob, I still have 3 left for interested parties.

Re: 10X Complete Modules

jaws2002, your modules have been made case negative and will ship out tomorrow. You should received them Friday or Saturday. Thanks.

Re: 10X Complete Modules

Still got 2 of these bad boys left.

Re: 10X Complete Modules

I just got home to find my modules waiting for me. They have arrived quickly and in good condition. I cant wait to see them powered up.

Re: 10X Complete Modules

1 module remaining.

Re: 10X Complete Modules

You wouldnt happen to have one of those with jayrobs lense mod would you? I do but if i can avoid having to take it out, because i dont believe the mod would fit on that module..

Re: 10X Complete Modules

If the 8x can go to 400mw safely what would be a better range for the 10x?
If you drove the 10x on a driver set for a sfaw6x at 170ma would that last longer than whatever it is set at to hit 400mw?

Re: 10X Complete Modules

gloryofblaze said:

You wouldnt happen to have one of those with jayrobs lense mod would you? I do but if i can avoid having to take it out, because i dont believe the mod would fit on that module..

Click to expand...

You can easily interchange lenses with this module. Screws right in.
As for the driver question, you can power it at 170mA but that would be an aweful waste of a 10X diode. Also it is believed by many (including myself) that these diodes are the same as 8X diodes. Hope that helps.

Re: 10X Complete Modules

Still hanging on to one of these modules folks. ANyone interested?

Re: 10X Complete Modules

yobresal said:

Still hanging on to one of these modules folks. ANyone interested?

Click to expand...

Is there any chance you'll be making anymore? I'm broke now, but I'd kill for one of these... I'm not asking for you to hold onto one. Just wondering if this is a business you will continue.