Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

12X S06J 405nm Diodes $54 Shipped US






E

educa

0
Joined
Jun 25, 2011
Messages
10
Points
0
I'm interested in a 405nm inside module + 405-G-2 Glas lens.

Just few questions

1) What power do you think will come out when you provide aprox 450mA to it?

2) Can these be focussed to have a very !VERY! small burning point at aproximately 3 or 4 foot distance? (I certainly cannot with my 445nm laser, but maybe this one can?)

3) I currently use a 445nm laser with a driver which I can set ON and OFF with ttl signal. Do you carry such a driver too? Or know where I could get such a driver ?


Kind regards,
Bart
 
DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
^^^ @ 450mA you should be around 600-700mW. Check this thread for more details and a couple of power graphs.
http://laserpointerforums.com/f38/new-kid-block-12x-bdr-s06j-56017.html#post790578

As a single mode diode these will focus to a very tight area and burn even at distance unlike the 445's. The 445 does a better job for visual brightness. While the 405's are a very neat color but not nearly as visually bright but they are amazing burners.;)

You could try the P3 Flexmod. Flaminpyro has been stocking them here.:beer: http://laserpointerforums.com/f39/sale-flexmod-p3-drivers-63932.html
 
Last edited:
D

Deleted member 22482

Guest
DTR, I want to buy your blue diode in module with glass lens and wires and then Mohrenbergs just add diode kit (Aurora C6), what mA is the best for that diode? His offering 1.8, 1.62 and one lower I forgot about. Thank you.
 
DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
ginhev123 said:
DTR, I want to buy your blue diode in module with glass lens and wires and then Mohrenbergs just add diode kit (Aurora C6), what mA is the best for that diode? His offering 1.8, 1.62 and one lower I forgot about. Thank you.
Click to expand...

For this diode I suggest sticking to 500mA or under. 420mA will give great life and power.;)

The 445's can use those higher output drivers.:beer:
 
Last edited:
E

educa

0
Joined
Jun 25, 2011
Messages
10
Points
0
What amount of mW do you expect aproximatly from a 405nm diode with G2 lens @ 420mA ?
 
D

Deleted member 22482

Guest
DTR said:
For this diode I suggest sticking to 500mA or under. 420mA will give great life and power.;)

The 445's can use those higher output drivers.:beer:
Click to expand...

Wait, so is Mohrenberg lieing? He says in the thread that you can use Daguins/DTR's diodes in his host, but the lowest driver he has is 1.2A, if you're saying it should be under 500mA, doesn't it mean that the diode would blow or something?
 
E

educa

0
Joined
Jun 25, 2011
Messages
10
Points
0
I think DTR is meaning 405nm diode @ <500mA

455nm can go lot higher
 
DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Yep look at the 445's for the 1.25A driver. I also offer the Flexdrives which are capable of running the 405's.;)
 
B

blazeman

0
Joined
Dec 12, 2011
Messages
20
Points
0
I purchased the 445nm M140 Diode In Module With Leads
& 405-G-2 Glass Lens from you
to use with Moh's c6 add a diode 1.62A ... and now I just purchased another Moh's add a diode 1.25... which diode can I run safely... I would like use a 12X S06J Bluray Diode In Module W/Leads & Three Element Glass Lens, but from what I'm reading this will be to much current? Should I stay with a 445nm M140 Diode. If so do you have the 445nm M140 Diode with a 3 element glass lens? As I would like to have a little different beam between the two. Any input will be greatly appreciated...
 
DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
blazeman said:
I purchased the 445nm M140 Diode In Module With Leads
& 405-G-2 Glass Lens from you
to use with Moh's c6 add a diode 1.62A ... and now I just purchased another Moh's add a diode 1.25... which diode can I run safely... I would like use a 12X S06J Bluray Diode In Module W/Leads & Three Element Glass Lens, but from what I'm reading this will be to much current? Should I stay with a 445nm M140 Diode. If so do you have the 445nm M140 Diode with a 3 element glass lens? As I would like to have a little different beam between the two. Any input will be greatly appreciated...
Click to expand...

Yes the 1.25A driver is too much current for the S06J. Stick with the 445 with that driver. I would suggest a Flexdrive set to no more than 500mA with the S06J.

I do have plenty of M140's and three element lenses. The three element will give you a tighter beam than the G-2 at the expense of power. You can grab them both on my web store.:beer:
https://sites.google.com/site/dtrlpf/home
 
B

blazeman

0
Joined
Dec 12, 2011
Messages
20
Points
0
DTR said:
Yes the 1.25A driver is too much current for the S06J. Stick with the 445 with that driver. I would suggest a Flexdrive set to no more than 500mA with the S06J.

I do have plenty of M140's and three element lenses. The three element will give you a tighter beam than the G-2 at the expense of power. You can grab them both on my web store.:beer:
https://sites.google.com/site/dtrlpf/home
Click to expand...

would this be the one ...Combo Special
445nm M140 Diode In Module With Leads
& Aixiz Glass Lens
$63 It doesn't say three element ?
 
You must log in or register to reply here.




Top