Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Power Rock Blu-Ray Laser PROBLEM!

Joined
Jan 16, 2012
Messages
21
Points
0
Lately this month I had ordered a Solar Force Battery as recommended from other users. I had been having an issue with my Power Rock 400mW Laser not burning like it should. I had received the laser and a UltraFire Battery. I charge the battery until the Charger had a Greenlight. I put the battery in and tested the laser to see if it could burn a hole through paper with a Black Dot made from a Sharpie Marker. My attempt was a Failure. There was no luck, and it did not work. The Dot was solid and bright like I thought it would be, but It wouldn't burn the Paper. So, I asked why on the Forums. I was told it was probably the battery not working like it should. Different people recommended batteries that might fix the problem. One person recommended the Solar Force Battery, so I looked into it. I decided I would buy the battery. I ordered the battery from Hong Kong and It arrived in about 3-4 Weeks. I placed the Solar Force Battery on the Charger and let it charge for about 3 Hours. Once the Charge was complete and the Light was green, I tested the battery out. The Attempt to burn paper with a Black Dot made from a Sharpie was again, a Failure. I don’t know how to fix this problem. Maybe it is the Charger. I heard that some of the Chargers from the Website I ordered the laser from ”Welcome to O-like,the source of good quality laser products at unbeatable price and perfect service ! “ were crap and that they didn’t work as well as they should. Well my Charger has a single slot for a Battery, and A Light at the Bottom that Glows Red if not Charged Completely or Green if the Charge is Complete. The Laser was in Brilliant Condition when I received it. It had no Scratches and was packed in the Package tight. Has this ever happen to anyone? Does anyone know any different ways on how to fix this problem?
 





Joined
Sep 13, 2008
Messages
57
Points
0
1) Make sure the laser is focused to a very thin point.
2) Have someone LPM the laser for you. It might be a dud, and way under spec.
 
Joined
Mar 27, 2011
Messages
14,125
Points
113
Have the laser tested... there are a few vets in texas who will help you out for the price of shipping the laser back to you;)
 




Top