Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

possible blu-ray hosts?






G

Geneticz

0
Joined
Jan 23, 2009
Messages
122
Points
0
Those should be fine, although you are limited to a flexidrive ( boost driver, requires less voltage). You would also have to use a 10440 battery ( For the AAA host)  

http://www.dealextreme.com/details.dx/sku.974

For the AA host you would need something like this.... (Not so sure tho, LPF veteran help me please!)

http://www.dealextreme.com/details.dx/sku.2844

They look like tight builds though. Hard to fit it all in... And you will need heatsinks, no idea if anyones made heatsinks for those models.

Good luck!
 
G

Geneticz

0
Joined
Jan 23, 2009
Messages
122
Points
0
Can someone please check if what I said was correct, cause looking back I am not so sure...
 
ndrew2505

ndrew2505

0
Joined
Feb 23, 2008
Messages
2,832
Points
48
you can shorten or lengthen the spring(by stretching) if you need to. if im not mistaken thats the ultrafire c3 host.
 
P

pyrostic

0
Joined
Feb 16, 2009
Messages
44
Points
0
i think you are right about "Silver" the ultrafire c3 host, but i can replace the ultrafire with 2 C2's and put a rkcstr driver in?, any clue on what I should set current to or have a link to someone that can preset current for me (not sure how to do it)
 
ndrew2505

ndrew2505

0
Joined
Feb 23, 2008
Messages
2,832
Points
48
pyrostic said:
i think you are right about "Silver" the ultrafire c3 host, but i can replace the ultrafire with 2 C2's and put a rkcstr driver in?, any clue on what I should set current to or have a link to someone that can preset current for me (not sure how to do it)
Click to expand...
if i would have known i could have done that and put it in with your ebay order... for br i wouldnt go above 120ma if you want the diode to live very long.. 110ma would be better though. read through the rkcstr thread(bst section) or the ddl thread(experiments and modifications section) and it should tell you how to test the current. you can simply use a 1ohm resistor...
 
P

pyrostic

0
Joined
Feb 16, 2009
Messages
44
Points
0
What do you mean by "if i would have known i could have done that and put it in with your ebay order..." drew? did I order something from you and not know it was you :p
 
ndrew2505

ndrew2505

0
Joined
Feb 23, 2008
Messages
2,832
Points
48
dont you go by pyrostic on ebay as well? mods_r_us is my profile... couldnt you tell from my avatar pic?
 
P

pyrostic

0
Joined
Feb 16, 2009
Messages
44
Points
0
wasn't even thinking man, I'm going to get a rkcstr and thanks for the information. shoot if i would have known you were on here I woulda paid your less price here :p (no probs though) the only reason I bought off of ebay for the sled is that the forums here were down at the time...
 
You must log in or register to reply here.




Top