Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

O-like 400mw 405nm w/ 405-g-1?

Joined
Sep 13, 2010
Messages
443
Points
18
I put the aixiz 445 lens in it, its a bit longer, so the brass retainer at the bottom of the spring loaded lens assembly has to be reamed out so its the same diameter as the lens. unfortunetly I have no experience with the 405-g-1 lens, but if its the same length as the aixiz 445 then yes it would work.

Cool. Thanks :beer:
 





Joined
Feb 20, 2011
Messages
327
Points
18
I put the aixiz 445 lens in it, its a bit longer, so the brass retainer at the bottom of the spring loaded lens assembly has to be reamed out so its the same diameter as the lens.

Are you talking about your 445? Because I took my O-like 405 apart and no modification had to be made to this laser to install an aixiz lens. And the 405 does not have a spring loaded lens assembly...

Without an LPM I can say that I didn't see a noticeable difference in the quality of the dot or in the overall brightness of the laser with the aixiz lens installed. Unfortunately I do not have a G-1 lens to test.

Wouldn't a glass lens have a big difference over a acrylic?
 
Last edited:

Montez

0
Joined
Dec 8, 2010
Messages
19
Points
0
Are you talking about your 445? Because I took my O-like 405 apart and no modification had to be made to this laser to install an aixiz lens. And the 405 does not have a spring loaded lens assembly...

Without an LPM I can say that I didn't see a noticeable difference in the quality of the dot or in the overall brightness of the laser with the aixiz lens installed. Unfortunately I do not have a G-1 lens to test.

Wouldn't a glass lens have a big difference over a acrylic?

Mine is the 445, I stand corrected. I figured since they are in the same host that they would use the same lens assy. Sorry
 
Joined
Feb 20, 2011
Messages
327
Points
18
Just wanted to clear it up. I was confused when you started describing the lens assembly. :yh:
 




Top