Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

My next PHR build

Cenobite9

Cenobite9

0
Joined
Oct 10, 2008
Messages
314
Points
18
OKay, more progress (but still no driver yet)... I have converted the 'clicky' switch to a momentary 'non-clicky' switch. It was actually fairly easy - after pushing the switch out of the aluminum case all I had to do was move the metal washer from the top side of the contact ring to the bottom. This severely limited travel of the button so I shaved the plastic on the inside of the switch a bit to allow the washer to slide further down. It turns out that the switch was identical to that of a standard ball point pen so conversion was simple. Once I get a new flexdrive for it I'll have a nice pointer/burner in a 'stylus' style housing. I think I'll move my AW210 into one of these hosts eventually and use the Dorcy for an 8x project. I'm definitely going to have to purchase some 405-G-1 lenses, too.
 





N

nikokapo

1
Joined
Dec 26, 2007
Messages
6,129
Points
0
Cenobite9 said:
OKay, more progress (but still no driver yet)... I have converted the 'clicky' switch to a momentary 'non-clicky' switch. It was actually fairly easy - after pushing the switch out of the aluminum case all I had to do was move the metal washer from the top side of the contact ring to the bottom. This severely limited travel of the button so I shaved the plastic on the inside of the switch a bit to allow the washer to slide further down. It turns out that the switch was identical to that of a standard ball point pen so conversion was simple. Once I get a new flexdrive for it I'll have a nice pointer/burner in a 'stylus' style housing. I think I'll move my AW210 into one of these hosts eventually and use the Dorcy for an 8x project. I'm definitely going to have to purchase some 405-G-1 lenses, too.
Click to expand...

Will you start producing this or are you just building one for yourself?

I'd appreciate a video of this host, it really looks promising ;)
 
Cenobite9

Cenobite9

0
Joined
Oct 10, 2008
Messages
314
Points
18
I may start producing some of these for sale depending on time and money available. I wish the front of the barrell was slightly longer so that I could 'secure' the focus ring behind the barrell opening. It would improve the appearance and for those who just want a pointer, it would prevent accidental turning of the ring.
 
Cenobite9

Cenobite9

0
Joined
Oct 10, 2008
Messages
314
Points
18
Ok, I have thought of a modification that would put the focus ring inside the barrel head. All I would have to do is cut 3/16 of an inch off the threaded part of the lower barrel assembly. This would still leave plenty of thread to screw the top on and at the same time, move the module low enough to allow the head of the barrel to screw down over the top of the focus ring. I am going to have to build a second pointer with this host to try this out.
 
Cenobite9

Cenobite9

0
Joined
Oct 10, 2008
Messages
314
Points
18
One month later and I'm finally finished with this build!!! I have attached a pic of the working PHR Pen build. Sorry for the crappy pic, I used my camera phone...

okay, it still won't attach... well it looks just like the pics from before except with a laser beam coming out of it.
 
Last edited:
You must log in or register to reply here.




Top