Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Anyone use RCKSTR driver and PHR-805T?

Joined
Jul 27, 2011
Messages
128
Points
18
I have a RCKSTR driver and I am wanting to get a PHR-805 and wanted to know if anyone has had experience with this setup.

Also, I would be using a Cree C3 host (14500 x 2) and want to know how much heatsinking I would need. I don't know how hot these new diodes get and want to make sure I'll have the proper cooling.
 





Joined
Nov 5, 2007
Messages
4,919
Points
83
Yeah I have done many PHR build with the Rkstr driver. You will have a ncie set up. You won't need copper, an aluminum heatsink will do fine. Heat won't be too much of a problem but be careful not to overpower the diode as it will die. They are cheap though so order a few and see which one you can push the hardest.
 
Joined
Dec 23, 2008
Messages
3,948
Points
63
i have a wicked core host modded my johnlawson that uses phr and rkcstr driver. it is pumping out 90mw.

michael.
 
Joined
Jan 27, 2011
Messages
701
Points
0
PHR's make nice little lasers, I have one made form a 501b
 
Last edited:




Top