Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Recovering Flashaholic

Joined
Nov 29, 2008
Messages
19
Points
0
Hi everybody my name is Adam and I am a recovering flashaholic it has been 2 weeks since my last build. I have found that lasers are the only thing that seems to take my mind off flashlights unfortunately now they are the only thing on my mind. I have completed two laser build since starting this bad habit a month ago. My first a Dorcy Jr. with 16x Sony diode at 350ma with a flexdrive and a RCR123a. The second a pen light host with a PHR-803t Blu-Ray at 150ma with a RKCSTR driver and 2X 10440. The Blu-Ray came out great, small pen with a forward clicky in the back so you have momentary on and click to stay on. Unfortunately I couldn't leave it alone and decided it might need a spacer to keep a spring from touching the case. Of course I unknowingly knocked the pot off the board, so I banged the laser on my hand to fix it, didn't help in fact that might explain the bad driver and diode:) Anyways I ordered more PHR-803ts and will have enough parts to make several more but this time I'm using a flexdrive and 2x AAA. I also left my Dorcy on in my pocket for an hour so now I have a awesome 2mw pointer, so I'm going to put in an 20x LOC hoping to push it to 420ma.

Now a couple of questions. Why are lasers more dangerous than burning things with a magnifying glass? And I understand why we control current but why is voltage not as much of a concern? If a diode has a forward voltage of 3v and I supply 3v@100ma that's .3W and one at 5.5v@100ma that's .55W so does power not matter either I mean how can the flexdrive do both, how do it know? Internal resistance of the driver :-?
I'm in Pennsylvana anyone close with a laser power meter?
Thanks, Adam
 





Joined
Jul 25, 2008
Messages
504
Points
0
It's more dangerous because laser light is coherent-all of the photons are moving in the same direction.
I don't know if this is right, but I think voltage doesn't matter as much because the driver regulates the voltage down (or up, in the case of boost drivers), to what the diode needs.
 
Joined
Apr 29, 2007
Messages
1,076
Points
0
LRMNmeyer said:
It's more dangerous because laser light is coherent-all of the photons are moving in the same direction.
I don't know if this is right, but I think voltage doesn't matter as much because the driver regulates the voltage down (or up, in the case of boost drivers), to what the diode needs.


That's a horrible reason why they are more dangerous. Coherence has nothing to due with the eye hazard. If you had a uncollimated beam that was coherent, it would still be a laser. The reason they are more dangerous is because they are collimated and thus have a higher source brightness.
 




Top