The solder was just taken off the pad If I new were to by a ribbon cable conecter that would be best as it would be easier for the person soldering it and there are no pass through wires that i know of. on the other side the pcd is coverd with other things so i know theres not a connection going...
Is there really no one out there who can do SMD soldering on something this small. I really need your guys's help with this, as I do not want to fork over $60 for a new logic board as I have already bought a new case, hard drive, and screen.
While installing a new hard drive for my Ipod classic 6th gen 80gb, I broke off the little white and brown clip that hols the battery ribbon to the pins on the board. I was thinking If somone was good enough at soldering they could solder a wire to each little pin and then connect those directly...
Hi,
I just tried it with my red laser and it lit without sharpie in like 3 seconds but I am only running it off 4.5v with a 150ma rockstr driver. And the distance was about 6 inches or so. I am guessing its around 130mw or less.
alrighty i fixed and man is it bright what do you think the duty cycle is i was just outside with it and yes i can see the beem its so cool and it was not warm even after a minute and i am running it 150ma. If i had a duty cycle of 1 minute on 1 minute off how long should it last me?
ok so i finished soldering up my first laser and the rckstar circuit board gets really warm but the diode does not light up at all. If i killed it wouldn't it at least be dim and i accidentally soldered to the bottom because i am dumb so i resolderd it on the top and i know the ground is to...
well i put of soldering it for tonight im going to try and maybe find that arctic 5 epoxy. If I pull on the diode i can make it come out like less then half a mm. But i think arctic silver 5 thermal compound for cpu's will work just as well maybe. I also have a question should i solder wires to...
Well tonight I am going to solder my diode to the circuit i got from rckstr. So I was putting them in roach clips and realized before I did that that the diode is loose in the housing. :-? I can twist the whole thing around the diode with ease but if i pull the diode out a bit it gets tight. Is...
Re: Micro-Drive laser driver – fits Aixiz module
I did read the updates i guess im used to things getting here quick like my senkat diode got to my house in three days lol. I just cant wait to finish my laser after i get this im going to buy a heat sink and a mxdl light to put it all in. :)
Re: Micro-Drive laser driver – fits Aixiz module
I ordered mine 4/1/08 and still have not received it and I live in the u.s. Any ideas why. I see amkdeath got his but he was further down the order line then I was which makes no sense. I cant wait to get it though.
Has anyone used the dorcy model #41-4285 as a laser host because my friend got me this flashlight for my birthday and i was wondering if it will work I just dont know how many ma it puts out but either way im going to use a 5ohm resitor to get the current to around 200-250ma. Tell me what you...
Well even though no one here likes ld sockets i found a place that sells them
its thorlabs dot com and saerch s8060 for the socket but they dont just sell that they sell allot of other kool stuff
i have a question how does two 10 ohm resitors = 5 ohms when 5 ohms allows more current then 10...
Ok thanks for the help you guys ill cut off some l.e.d. leads and solder them to the pins on the diode and i have one more question is it safe to bend the diode pins just so u dnt get any solder on the other pins accidently?