Recent content by GeGGuli

u took lens of the module or did you just unfocus the laser?

i have dummy load but i dont know if it works so (lol) can i somehow test if my dummyload works?

sry douple post

ok i got my macro shots...and they are quite large:undecided: so ill just link them. https://dl.dropbox.com/u/4064914/IMGP0755.JPG https://dl.dropbox.com/u/4064914/IMGP0756.JPG https://dl.dropbox.com/u/4064914/IMGP0758.JPG

i have connecter negative to case pin the diode has alot of solder in pins but i did keep the iron to diode just little time BTW: can i test someway if diode is dead and if driver is dead?

i havent runned my flexidrive whitout an load

i will try to get macro shots but my digi camera cant do the job so i wait till my brother comes home for weekend (dont know if he comes this weekend) and how fragile is flexidrive? cuz first time i putted heatshrink tubing on top of an drive and it got little hot (just little)

my solder joints are quite good i think and yeas if i remember rigth i shorted out the caps and i push diode to module before i soldered those wires

i soldered positive to "reds" positive and negative to "reds" not used pin as i looked from bluray diode digram DrLava presetted the current to 90 mA

hello! ive ordered phr 803T diode and flexidrive V5 assembly went well, extracted diode and quikly soldered it into flexidrive and soldered flexidrive to + and - terminals of my hosts pcb and when i tested it it didnt work :( batterys produce 3.6 volts (tested with DMM) no harm caused to diode...

WOAH! 55MW !! thats INSANE its like :lasergun: or do you mean 55mW :whistle:

buy same looking 100mW green module then replace 5mW one with uoyr brand nwer 100mW module :)

hmm i dont know how to say this but i think its like this contionous = _____________________________ pulsed = _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ correct me if im wrong :o

thats a very nice build :gj:

take an project box and drill a hole in it put laser inside and put cig from hole thats safe way i think :)