Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

[Moe Ron]

Re: The Scorcher & The Scorcher Jr. 445nm 3.2w+ w/strobe

UPDATE: This build has been sold !!
Greetings,

I finished another build and should have another ready later today.
This build uses my normal 4 mode driver, 100%, 50%, 5%, and strobe. The host is an MX900 with heatsink and focus adapter by Mrcrouse, 9mm 445nm diode from DTR and G9 lens pulled from the diode. Uses 2x26650 or 2x18650 batteries with included adapter sleeves. This one is recommended to 4 minutes or less duty cycle, but can run longer. :eg:

Here's some pic's....

UPDATE: This build has been sold !!
The asking price for this build is $235 shipped CONUS, and does not come with batteries, charger or glasses. You should either already have these, or have some coming.
Always use proper safety and protect yourself and others.

cheers,
Moe

 

[Moe Ron]

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

UPDATE : All builds except The Scorcher Jr. have been sold !!
Greetings,

Here's more pic's of The Scorcher's and Scorcher Jr.

As you can see I have 2 types of focus adapters, a smaller knurled type and the normal larger ones that Mrcrouse makes for me. If you have a choice let me know and will make sure you get the type wanted.
All builds pictured except 1 are currently available..

cheers,
Moe

 

[Moe Ron]

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

UPDATE: This build has been sold !!

Greetings,

This build is the 2nd of the currently available Scorcher's. Uses all the same parts with the exception of the focus adapter being the knurled type. The heatsink is by Mrcrouse, 9mm 445nm diode from DTR, lens is the O-like G2, driver is 4 mode constant current set at 2.5a. Batteries are 2x26650 or 2x18650 with included adapter sleeves.
The asking price for this build is $215 shipped CONUS.

UPDATE: This build has been sold !!

Will post pic's and power output of the last build as time permits.


cheers,
Moe

 

[Moe Ron]

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

UPDATE : This build has been sold !!

Greetings,


Here's the last of The Scorcher builds. This uses my normal 4 mode driver, 100%, 50%, 5% and strobe. The host is an MX900 with the heatsink by Mrcrouse, 9mm 445nm diode from DTR and lens is the O-like G2. Uses 2x26650 or 2x18650 batteries with included adapter sleeves. Does not come with batteries, charger, or safety glasses.
Asking price is $200 shipped CONUS.

Here's some pic's....

UPDATE : This build has been sold !!

I still have The Scorcher build using the 5 mode driver set at 2.3a available, as well as a Scorcher Jr. and another build listed in a different post.
All priced to move !!


cheers,
Moe

 

[Moe Ron]

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

Here's some pic's of the remaining Scorcher's and Scorcher Jr.

From left to right,The Scorcher C ; has been sold, The Scorcher 5 mode ; has been sold, and The Scorcher Jr.

The Scorcher C ; Has been sold.

The Scorcher 5 mode ; Has been sold.

The Scorcher Jr.

These are all priced to move at $200, get yours before there all gone !


cheers,
Moe

 

[Moe Ron]

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

:bumpit:


cheers,
Moe

 

[Moe Ron]

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,


:bumpit:


cheers,
Moe

 

[Moe Ron]

Re: PRICE DROP !! Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

I have dropped the price on the available Scorcher's and Scorcher Jr. to $200. All but 1 are 3w+ builds and 1 is 2.9w using a little different driver.
Get yours today !!


cheers,
Moe

 

[Moe Ron]

Re: PRICE DROP !! Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

:bumpit:


cheers,
Moe

 

[Moe Ron]

Re: PRICE DROP !! Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,


:bumpit:


cheers,
Moe

 

[Moe Ron]

Re: PRICE DROP !! Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

I recently purchased one of the new 3.5w NDB7A75 diodes from DTR and running with my normal 4 mode driver and a 3 element glass lens am getting 3524mw. With a G2 lens it will very quickly peg my meter as it is only a 3.7w.
If you are interested in getting a Scorcher with this diode as part of the build, please PM me. The cost of the diodes are still too high to use in my normal builds, but hopefully will continue to drop in price and will start seeing these builds offered.
Meanwhile, we still have a couple Scorchers and a Scorcher Jr. available using the usual NDB7875 diode for $200 shipped CONUS.

Here's some pic's,

From left to right we have The Scorcher Jr. ; has been sold, The Scorcher w/5 mode driver ; has been sold, and The Scorcher ; has been sold.
As always it is important to practice proper laser safety at all times. You should have the proper wavelength glasses for both yourself and those around you and wear them when using your laser.
If you need help as to the type to have, just ask. Many here will help.

cheers, :beer:
Moe

 

[Moe Ron]

Re: PRICE DROP !! Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,

I thought I would show a few pics of the way The Scorcher 's design is intended. Since most of this type host uses a heatsink held in by the bezel, you get very little heat transfer into the existing heatsink of the host. As shown below, The Scorcher's heatsink fits like a glove and screws into the host. The driver fits into the heatsink which then screws into the host taking care of the heatsink, for it. Since both tie into the existing heatsink of the host it provides better heat dissipation, and longer duty cycle.

If you look close inside the head, there is a ring which screws in so when the heatsink is in place, the driver is held tight.

Look Ma, though the bezel is gone it doesn't fall out !!

If you look at this pic you can just see the driver and how it
is held in by the heatsink.

As you can see here, fits like a glove.

After putting a little arctic silver on all the threads, when assembled the entire head now dissipates heat, and does so extremely well. While there are builds with larger heatsinks, this provides the best possible heat dissipation for the type of host used.
I thought about making it a press fit for the diode which would be better for heat transfer than a 12mm module, but I wanted to keep the design a little easier to work with as not everyone can press in the diode. The only tools needed to work and maintain this build is a 5/32 allen, soldering iron, and 2 properly working hands !!
As it is now it takes at least 4 minutes before you can really feel any warmth and 5 when you should be turning it off.
With the power, duty cycle and price for these builds you will be hard pressed to locate another with these features, at the price being offered.

Get your new Scorcher today !!


cheers,
Moe

 

[Moe Ron]

Re: PRICE DROP !! Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,


:bumpit:


cheers,
Moe

 

[djcmount]

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

PM sent.

 

[Moe Ron]

Re: The Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Greetings,


PM replied.


cheers,
Moe

PM sent.

 

[djcmount]

Re: PRICE DROP !! Scorcher & The Scorcher Jr. 445nm 3.4w+ w/strobe

Payment sent