Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers



List of Laser Pointer Companies by Category



Welcome to Laser Pointer Forums! A common question is where to buy laser pointers. If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.






Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Laser Hosts



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 05-01-2017, 04:36 AM #1
Lildutchboy7's Avatar
Class 2M Laser
 
Join Date: Apr 2016
Location: Newport News Virginia.
Posts: 869
Rep Power: 7114
Lildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond repute
Lildutchboy7 Lildutchboy7 is online now
Class 2M Laser
Lildutchboy7's Avatar
 
Join Date: Apr 2016
Location: Newport News Virginia.
Posts: 869
Rep Power: 7114
Lildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond repute
Default A Good Start I Think.

Hello all!

So I have had an old Ehg host laying around for a while and it was missing the heatsink/head. I've wanted to get it replaced for the longest time but I have a hard time describing what I want when I try and have a new one made.

So, I decided to make one my own so that I could project my thoughts properly. I went out, bought a mini lathe, and mini band saw, and I already own/have access to, a bench wheel and drill press. These tools are all currently at my parents house but I was able to grab some time with them this past weekend. Once I get out of the lease on my current apartment and find a place with a garage I will be able to keep this tools with me instead of 7 hours away.
I started out just playing with the tools and making small cuts seeing what each and every tool was capable of. Then I went on to design the head for my host and I like how it is so far. I didn't have time to finish it, but in the future with a place of my own to work, I feel like I'll have lots of time to make many pieces.

Here is the old Ehg host:


Here is the lathe and bandsaw. Sorry for the mess, my dad was redoing the basement. I also hadn't taken the shopvac to the lathe yet
Edit: It is a 7X14 lathe btw.



Here is the beginning:


And here is the end result (so far, I still have yet to cut the appropriate holes and polish it. I might make a few small touch up cuts as well.)




I had a lot of fun during this process and it was a great learning experience. I am excited to try this again and I am already flying through thoughts of what I want to make

I wanna thank MrCrouse for giving me some inspiration and some guidance on what I might need to start my own operation.

Thank you all for taking a quick look
I just really wanted to share my experience and the fun I had with it


__________________
What Is Better?
To Be Born Good,


-----------Or-----------


To Overcome Your Evil Nature Through Great Effort?



-====•=[]────────────────────────────────────────────────── ─────────────────✺


639nm MITSU G84 1.8W Aluminum ElectricPlasma Host + Copper Jewel Focus Adapter By FlaminPyro

589nm DragonLasers Spartan 97.9mW (With 583.8nm 586.2nm and 591nm cold lines)

445nm M140 2W In C6

Incoming 532nm JetLasers 600mW Module in Brass/Aluminum Host

Multiple $5 Ebay Laser pens

Name's Zach.

Last edited by Lildutchboy7; 05-01-2017 at 04:39 AM.
Lildutchboy7 is online now   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 05-01-2017, 08:24 AM #2
BobMc's Avatar
Class 3R Laser
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 2,044
Rep Power: 24738
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
BobMc BobMc is online now
Class 3R Laser
BobMc's Avatar
 
Join Date: Apr 2016
Location: Lancaster ca
Posts: 2,044
Rep Power: 24738
BobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond reputeBobMc has a reputation beyond repute
Default Re: A Good Start I Think.

Very impressive, will be interesting to see the final product. Congrats on your lathe and bandsaw. Promises to be fun in the future. Enjoy
__________________
BobMc's Laser Museum;
http://laserpointerforums.com/f76/bo...l?nojs=1#links


~ Till righteousness is sought after for it's own sake, mankind will not know what makes for peace. ~
BobMc is online now   Reply With Quote
Old 05-01-2017, 08:40 AM #3
GSS GSS is offline
Class 3R Laser
 
Join Date: Apr 2015
Location: Fall river MA
Posts: 2,258
Rep Power: 26300
GSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond repute
GSS GSS is offline
Class 3R Laser
 
Join Date: Apr 2015
Location: Fall river MA
Posts: 2,258
Rep Power: 26300
GSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond reputeGSS has a reputation beyond repute
Default Re: A Good Start I Think.

Good for you It sure looks like a nice match to the host! I have a feeling your going to be sleeping at your parents house for a while
It looks like the new head has similar sized OD's at each size to chuck but you might want to drill the module hole first before all the pretty undercuts?
__________________
"Diamond Select" TOS Phaser 532 190mw
"Diamond Select" TOS Phaser 532 150mw
"Rubie's" TOS Phaser M02 520 1.8A
"Rubie's" TOS Phaser A140 1.4A
"Rubie"s" TOS Phaser A140 1.1A "proto focus nozzle(Lifetime)"
"Rubie's" TOS Phaser M140 1.8A
GSS is offline   Reply With Quote
Old 05-01-2017, 09:49 AM #4
BowtieGuy's Avatar
Class 3B Laser
 
Join Date: Oct 2012
Location: S.E. Michigan U.S.A.
Posts: 3,113
Rep Power: 30134
BowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond repute
BowtieGuy BowtieGuy is online now
Class 3B Laser
BowtieGuy's Avatar
 
Join Date: Oct 2012
Location: S.E. Michigan U.S.A.
Posts: 3,113
Rep Power: 30134
BowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond repute
Default Re: A Good Start I Think.

Good job and congrats on your new tools Ldb7, you're going to enjoy making your own parts.
Making your own laser parts can be as much fun as using them IMO, it can also get to be just about as expensive!

As GSS mentioned, you will probably want to drill/ream your diode module hole while still chucked up, this will help keep the bore and beam straight with the O.D., and you won't have to hold your finished heatsink/head piece in the 3 jaw chuck again, and risk marring it up.

One other thing, your Central Machinery bandsaw is usually set up for wood cutting only, be careful cutting aluminum, since the blade is not made to cut hard material, and the RPM/SFPM (surface feet per minute) on a wood saw is set much faster than a metel cutting one.

+rep!
__________________
405nm Solarstorm S3 (1.09W) • W/L Sonar (264mW)
405nm Custom JETLASERS Ti-B (1.08W)

445nm Build "Ole Blue" (2.8W+)
445nm 1.3W JETLASERS PL-E (1.5W)

450nm Custom JETLASERS Ti-B (327mW)
462nm Solarforce T2 (2.1W)-link-
465nm 1.4mW JETLASERS Mini (1.64mW)
467nm "Maraxus" (2.3W)
470nm "Silver Bullet"
515nm 30mW Ehgemus titanium (84mW)
520nm S/S build (250mW) •50mW JETLASERS Ti-B (73mW)
520nm Ehgemus Custom (1.45W) •Coleman Jr. (234mW)
-link-
532nm 1.5W Goldenstar lab (3W)
532nm 500mW JETLASERS PL-E (754mW)
532nm 100mW JETLASERS Ti-B (161mW)
532nm 5mW "Eclipse" mints tin (54mW)

589nm 80mW CNI PGL-III-C (154mW)
589nm 50mW Dragonlasers Spartan (124mW)

594nm L/G Rigel-6 "LPF Anniv. Ed." (6.7mW)
635nm 20mW JETLASERS Ti (30mW)
638nm Custom JETLASERS Ti-B (232mW)-link-
638nm "Coleman Special" (260mW)
638nm Build in sinner's "MS-SSW Stubby" (1.25W)
650nm W/L E2 (89mW) • Laserbtb PL-650 1000 (1W)
660nm S/S Build (383mW)
674nm 501B/Melles Griot u/k Build 20mW

LK-3D Projector

5W Ophir/dmm LPM

Last edited by BowtieGuy; 05-01-2017 at 10:22 AM.
BowtieGuy is online now   Reply With Quote
Old 05-01-2017, 10:34 AM #5
Lildutchboy7's Avatar
Class 2M Laser
 
Join Date: Apr 2016
Location: Newport News Virginia.
Posts: 869
Rep Power: 7114
Lildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond repute
Lildutchboy7 Lildutchboy7 is online now
Class 2M Laser
Lildutchboy7's Avatar
 
Join Date: Apr 2016
Location: Newport News Virginia.
Posts: 869
Rep Power: 7114
Lildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond repute
Default Re: A Good Start I Think.

Quote:
Originally Posted by BowtieGuy View Post
Good job and congrats on your new tools Ldb7, you're going to enjoy making your own parts.
Making your own laser parts can be as much fun as using them IMO, it can also get to be just about as expensive!

As GSS mentioned, you will probably want to drill/ream your diode module hole while still chucked up, this will help keep the bore and beam straight with the O.D., and you won't have to hold your finished heatsink/head piece in the 3 jaw chuck again, and risk marring it up.

One other thing, your Central Machinery bandsaw is usually set up for wood cutting only, be careful cutting aluminum, since the blade is not made to cut hard material, and the RPM/SFPM (surface feet per minute) on a wood saw is set much faster than a metel cutting one.

+rep!
Yeah I still have yet to get a chuck for the tailstock so for now the holes will need done with the drill press.

The bandsaw cuts through the aluminum very well even though the fpm is very high. Normally I'd like it to be somewhere near 300 instead of 2000, but I'll just remain cautious with it for now
My job requires me to work with metals every day so this wasn't much different than what I'm used to. I'd love to go back and do it again this weekend, but I got in a little fender bender on the high way
__________________
What Is Better?
To Be Born Good,


-----------Or-----------


To Overcome Your Evil Nature Through Great Effort?



-====•=[]────────────────────────────────────────────────── ─────────────────✺


639nm MITSU G84 1.8W Aluminum ElectricPlasma Host + Copper Jewel Focus Adapter By FlaminPyro

589nm DragonLasers Spartan 97.9mW (With 583.8nm 586.2nm and 591nm cold lines)

445nm M140 2W In C6

Incoming 532nm JetLasers 600mW Module in Brass/Aluminum Host

Multiple $5 Ebay Laser pens

Name's Zach.

Last edited by Lildutchboy7; 05-01-2017 at 10:36 AM.
Lildutchboy7 is online now   Reply With Quote
Old 05-01-2017, 10:53 AM #6
BowtieGuy's Avatar
Class 3B Laser
 
Join Date: Oct 2012
Location: S.E. Michigan U.S.A.
Posts: 3,113
Rep Power: 30134
BowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond repute
BowtieGuy BowtieGuy is online now
Class 3B Laser
BowtieGuy's Avatar
 
Join Date: Oct 2012
Location: S.E. Michigan U.S.A.
Posts: 3,113
Rep Power: 30134
BowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond repute
Default Re: A Good Start I Think.

Sorry to hear that, I hope everyone is OK.
__________________
405nm Solarstorm S3 (1.09W) • W/L Sonar (264mW)
405nm Custom JETLASERS Ti-B (1.08W)

445nm Build "Ole Blue" (2.8W+)
445nm 1.3W JETLASERS PL-E (1.5W)

450nm Custom JETLASERS Ti-B (327mW)
462nm Solarforce T2 (2.1W)-link-
465nm 1.4mW JETLASERS Mini (1.64mW)
467nm "Maraxus" (2.3W)
470nm "Silver Bullet"
515nm 30mW Ehgemus titanium (84mW)
520nm S/S build (250mW) •50mW JETLASERS Ti-B (73mW)
520nm Ehgemus Custom (1.45W) •Coleman Jr. (234mW)
-link-
532nm 1.5W Goldenstar lab (3W)
532nm 500mW JETLASERS PL-E (754mW)
532nm 100mW JETLASERS Ti-B (161mW)
532nm 5mW "Eclipse" mints tin (54mW)

589nm 80mW CNI PGL-III-C (154mW)
589nm 50mW Dragonlasers Spartan (124mW)

594nm L/G Rigel-6 "LPF Anniv. Ed." (6.7mW)
635nm 20mW JETLASERS Ti (30mW)
638nm Custom JETLASERS Ti-B (232mW)-link-
638nm "Coleman Special" (260mW)
638nm Build in sinner's "MS-SSW Stubby" (1.25W)
650nm W/L E2 (89mW) • Laserbtb PL-650 1000 (1W)
660nm S/S Build (383mW)
674nm 501B/Melles Griot u/k Build 20mW

LK-3D Projector

5W Ophir/dmm LPM
BowtieGuy is online now   Reply With Quote
Old 05-01-2017, 10:55 AM #7
Lildutchboy7's Avatar
Class 2M Laser
 
Join Date: Apr 2016
Location: Newport News Virginia.
Posts: 869
Rep Power: 7114
Lildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond repute
Lildutchboy7 Lildutchboy7 is online now
Class 2M Laser
Lildutchboy7's Avatar
 
Join Date: Apr 2016
Location: Newport News Virginia.
Posts: 869
Rep Power: 7114
Lildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond repute
Default Re: A Good Start I Think.

Quote:
Originally Posted by BowtieGuy View Post
Sorry to hear that, I hope everyone is OK.
Yeah I'm fine, just gonna be without the car till its fixed. Thanks though.
__________________
What Is Better?
To Be Born Good,


-----------Or-----------


To Overcome Your Evil Nature Through Great Effort?



-====•=[]────────────────────────────────────────────────── ─────────────────✺


639nm MITSU G84 1.8W Aluminum ElectricPlasma Host + Copper Jewel Focus Adapter By FlaminPyro

589nm DragonLasers Spartan 97.9mW (With 583.8nm 586.2nm and 591nm cold lines)

445nm M140 2W In C6

Incoming 532nm JetLasers 600mW Module in Brass/Aluminum Host

Multiple $5 Ebay Laser pens

Name's Zach.
Lildutchboy7 is online now   Reply With Quote
Old 05-01-2017, 02:32 PM #8
diachi's Avatar
Class 4 Laser
 
Join Date: Feb 2008
Location: Yellowknife, NT, Canada
Posts: 7,923
Rep Power: 25945
diachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond repute
Send a message via Skype™ to diachi
diachi diachi is online now
Class 4 Laser
diachi's Avatar
 
Join Date: Feb 2008
Location: Yellowknife, NT, Canada
Posts: 7,923
Rep Power: 25945
diachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond reputediachi has a reputation beyond repute
Send a message via Skype™ to diachi
Default Re: A Good Start I Think.

Looking forward to seeing more, that's a unique host!
__________________


405nm | Banggood LT-850 | "5mW" | Review Unit | Review WIP
445nm | Sanwu Laser Pocket Series | 400mW Metered
445nm | NDB7242E Pen Build | 60mW Metered | >>Build Thread<<
450nm | LaserPointerStore - Thor H2 | 1W(?) | Review Unit | >>Review<<
488nm | Spectra Physics 163 Argon | ~30mW Metered
515nm | PL515 Pen Build | 50mW Metered | >>Build Thread<<
520nm | Laserlands 520 | 5mW | Review Unit | 3mW metered | >>Review<<
532nm | Gearbest 303 Pointer | 50mW Metered
532nm | Gearbest JD-850 Pointer | 30mW Metered (I think, need to re-test).
633nm | HeNe | 6mW
633nm | Spectra Physics 155 HeNe | <1mW >>Thread<<
650nm | Sanwu Laser Pocket Series | 200mW Metered
808nm | Melles Griot 532nm Lab Unit | No Crystals >10W | X2



Check out my Reddit Subreddit! >>/r/laserpointers<<

diachi is online now   Reply With Quote
Old 05-01-2017, 04:56 PM #9
ElectricPlasma's Avatar
Super Moderator
 
Join Date: Dec 2015
Location: Southern Ontario, Canada
Posts: 1,299
Rep Power: 24147
ElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond repute
ElectricPlasma ElectricPlasma is offline
Super Moderator
ElectricPlasma's Avatar
 
Join Date: Dec 2015
Location: Southern Ontario, Canada
Posts: 1,299
Rep Power: 24147
ElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond repute
Default Re: A Good Start I Think.

Looks good! If that lathe's new make sure to check over everything to make sure it's tight and rigid (well, where it needs to be lol) I've seen some pretty poor quality control on these mini lathes before. Also don't forget your cutting fluid Good job Zach!
__________________

I'm selling some custom machined hosts. Click here to take a look!
__________________

-====•=[]
────────────────────────────────────────✺

632.8nm: Melles Griot HeNe, 1mW
532nm: Custom made GITD Pocket laser: ~133mW
532nm: Chrome laser pen: ~50mW
532nm: eBay 303: ~60mW
465nm: 07E Laser Box Build: 4W
462nm: M462 Pocket Build: 1W
450nm: Stainless Steel NUBM44 Handheld: 6.8W
445nm Pocket Series from Podo (Sanwu): 500mW
405nm: eBay pen

Keep yourself safe. *link*
-====•=[]
────────────────────────────────────────✺

Last edited by ElectricPlasma; 05-03-2017 at 09:17 PM.
ElectricPlasma is offline   Reply With Quote
Old 05-01-2017, 08:15 PM #10
Lildutchboy7's Avatar
Class 2M Laser
 
Join Date: Apr 2016
Location: Newport News Virginia.
Posts: 869
Rep Power: 7114
Lildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond repute
Lildutchboy7 Lildutchboy7 is online now
Class 2M Laser
Lildutchboy7's Avatar
 
Join Date: Apr 2016
Location: Newport News Virginia.
Posts: 869
Rep Power: 7114
Lildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond reputeLildutchboy7 has a reputation beyond repute
Default Re: A Good Start I Think.

Quote:
Originally Posted by ElectricPlasma View Post
Looks good! If that lathe's new make sure to check over everything to make sure it's tight and ridged (well, where it needs to be lol) I've seen some pretty poor quality control on these mini lathes before. Also don't forget your cutting fluid Good job Zach!
Thanks EP! I gave it a good lookin over and it all seems good
And yeah I got my cutting fluid all set up. The lathe and mill operators where I work gave me some good tips as well, so I hope I'm set to go. Now I just need the next 5 months to go by fast so that I get move into a place with my own workshop
__________________
What Is Better?
To Be Born Good,


-----------Or-----------


To Overcome Your Evil Nature Through Great Effort?



-====•=[]────────────────────────────────────────────────── ─────────────────✺


639nm MITSU G84 1.8W Aluminum ElectricPlasma Host + Copper Jewel Focus Adapter By FlaminPyro

589nm DragonLasers Spartan 97.9mW (With 583.8nm 586.2nm and 591nm cold lines)

445nm M140 2W In C6

Incoming 532nm JetLasers 600mW Module in Brass/Aluminum Host

Multiple $5 Ebay Laser pens

Name's Zach.
Lildutchboy7 is online now   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On











Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 12:27 AM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC