Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

OPEN SOURCE: "CC-Boost" - 2.4 Amp boost driver - RC1

ARG

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
rhd said:
That should be a linear driver, and I think those projects exist on the forum :)
Click to expand...

The P3 has a few features that makes it a little harder to DIY than a regular linear driver, such as the 7s start up delay and interlock for FDA compliance.

rhd said:
EDIT: I think someone should make a DIY bench supply circuit that can supply really high currents, from a LiPo source (instead of AC), with both coarse and fine voltage and current adjustment knobs.
Click to expand...

This project is still ongoing - http://laserpointerforums.com/f39/feeler-high-current-psu-pcbs-83429.html#post1204631
If you would like to take a stab at it let me know, I've got all the design files and it's 80% done.
 
Last edited:





The Lightning Stalker

The Lightning Stalker

0
Joined
Aug 14, 2013
Messages
2,655
Points
63
KRNAZNBOY said:
Yo just my opinion here, but we IMO, and this is completely up for debate, we need a new high power LAB style driver. No regard to size, just something that you can bolt to a heatsink, and that has a 12-turn pot for precision current setting. Basically, FlexmodP3 but for cheap and cooler!

Just a suggestion!
-matt
Click to expand...

rhd said:
That should be a linear driver, and I think those projects exist on the forum :)
Click to expand...

Why yes, they do. :rolleyes:
Would a 9-turn pot be enough?

http://laserpointerforums.com/f67/line-drive-high-current-linear-driver-90624.html

rhd said:
EDIT: I think someone should make a DIY bench supply circuit that can supply really high currents, from a LiPo source (instead of AC), with both coarse and fine voltage and current adjustment knobs.
Click to expand...

That would be excellent. Something for
scope testing drivers without the need for
an isolated probe
 
crazyspaz

crazyspaz

0
Joined
Jul 4, 2012
Messages
2,834
Points
63
petters said:
I'll take on that challenge, starting now :)
Click to expand...

Awesome...will it be open source, though? Also, what kind of foot print are you thinking?

ARG said:
This project is still ongoing - http://laserpointerforums.com/f39/feeler-high-current-psu-pcbs-83429.html#post1204631
If you would like to take a stab at it let me know, I've got all the design files and it's 80% done.
Click to expand...

That would be amazing...however, I think RHD meant an adjustable power supply that would run off a few 18650's or something of the sort. Either would be fantastic, really- I can see a few potential problems with a strictly battery driven power supply though, and a full AC input would be more work to assemble, but would be well worth it in my opinion.
 
ARG

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
crazyspaz said:
That would be amazing...however, I think RHD meant an adjustable power supply that would run off a few 18650's or something of the sort. Either would be fantastic, really- I can see a few potential problems with a strictly battery driven power supply though, and a full AC input would be more work to assemble, but would be well worth it in my opinion.
Click to expand...
That's what it is, an adjustable power supply. It can be powered from 3x 18650's, it takes 12V input.
 
The Lightning Stalker

The Lightning Stalker

0
Joined
Aug 14, 2013
Messages
2,655
Points
63
rhd

rhd

0
Joined
Dec 7, 2010
Messages
8,475
Points
0
I did a quick fork of the circuit I came up with for (eventually) the next version of the CC-Boost. I thought it would be fun to see what could be done within the same exact footprint as the FlexDrive (12x9). Here's what I came up with. It's still 2.4 Amp capable (though not 3.5A+ capable like we were targeting for the next revision generally).

I haven't ordered any. The next version is still at the imaginary driver stage, and I probably won't test it any time soon. Just a tease.

attachment.php
 

Attachments

  • 12x9.png
    12x9.png
    61.5 KB · Views: 206
P

petters

0
Joined
May 30, 2011
Messages
218
Points
18
It would be adjustable on a really wide range, not by my computer so ill need to check back
 
IWIRE

IWIRE

0
Joined
Dec 18, 2013
Messages
630
Points
0
rhd said:
The next version is still at the imaginary driver stage, and I probably won't test it any time soon.
Click to expand...
:crackup: I have lots of imaginary drives I'm working on. I even have imaginary drives on order, and a lot of drives I imagined would be what the fleabay listing stated they were but weren't.

Yours actually looks a lot closer to reality than any of the above I listed. :)

I used one of the cc-boost drives in a 445nm build last week for a friends birthday present. It was in an extra Zero Lasers host I had laying around with a big aluminum heat sink. I just thermal epoxied it to the back of the heat sink. It worked great ! If anything goes wrong with it I'm sure I'll hear about it. I'm not worried about the drive, just the fact I assembled the drive worries me. :crackup:

Soon as I have time I'm going to parallel a couple of them and see what happens. :)
 
rhd

rhd

0
Joined
Dec 7, 2010
Messages
8,475
Points
0
I'm thinking of ordering parts to test out two initial layouts of the next planned fork that could eventually become an RC2 (a 3.5A boost of similar size, and a 2.4A boost with the same dimensions as a FlexDrive)

However, is anyone actually using these open source designs?

My DigiKey costs are getting up there, so I don't want to pursue this if nobody is making use of it.
 
crazyspaz

crazyspaz

0
Joined
Jul 4, 2012
Messages
2,834
Points
63
I know adam1 made a run of them and I plan on making some soon as well...just the whole money thing, or rather lack there of.
 
IWIRE

IWIRE

0
Joined
Dec 18, 2013
Messages
630
Points
0
rhd said:
However, is anyone actually using these open source designs?
Click to expand...

So far I've only done three builds using the drive. But they were builds I wouldn't have been able to complete at the present time if it weren't for this drive.

My building has slowed because I've been working on my house. I think the drive project is a worthwhile one. You already know I appreciate all you have done.

I also feel you shouldn't absorb the cost of designing them and give them away. I have no problem chipping in a few bucks to help further the cause. Whether it ends up a working design or the time frame is irrelevant. It's just part of research and development.

Maybe others will chime in with their thoughts. :beer:
 
The Lightning Stalker

The Lightning Stalker

0
Joined
Aug 14, 2013
Messages
2,655
Points
63
DING

3 of the RC1 just came out of the oven and
are done on the first side. One of them is
going towards a future 9mm build.
 
Jstr

Jstr

0
Joined
Feb 10, 2014
Messages
347
Points
0
I bought three of them from adam1 and I plan on making some when I have time. A flexdrive sized boost would be perfect. I really appreciate these design threads. They are very informative. I'm sure the forum could help out financially if needed, or I would suggest selling some yourself for a profit. From what I can tell, these can easily compete with the x drives, especially if the supply was reliable. Either way, thank you for doing this, rhd, I really appreciate it and I'm sure we all do.
 
You must log in or register to reply here.





Top