Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Drivers, Test-load, Power Supply, & Batteries



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 08-03-2012, 06:33 PM #209
foulmist's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
foulmist foulmist is offline
Class 3R Laser
foulmist's Avatar
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

Kent you can get probably a little bit more than 2.2A in boost mode and around 3A in buck mode.


foulmist is offline   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 08-03-2012, 10:10 PM #210
Kizdawg's Avatar
Class 2M Laser
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Kizdawg Kizdawg is offline
Class 2M Laser
Kizdawg's Avatar
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

Kewl that sounds great I must have misunderstood ya.. I'll definately will give it a go on this 9mm 445 I just recieved when I get it back I also want to order a few more parts and try to make another I'm sure I can get one of them TPS on ok...
__________________
405nm PHR-805T UniqueFire A10-B 100ma mogasm linear
405nm 600mw S06J C6 cree
445nm A140 1.35A 1.7W guidesman with G2
445nm 2.5W+ G-2 H1600 in a copper axis 1800ma Mogasm linear 2x AR16340's in a guidesman
445nm 9mm Blitzbuck V3 2.8A Saik 2.9W
445 800mw 9mm in a RHD MOD9 a pollished stainless auraura sh-032 667ma benboost
450nm Osram PL450 301mw in a powerlight B50 Host 400ma microboost
450nm Osram PLTB450 1.7W in a Bigboy Host 1650ma FMT driver
532nm 80mw DPSS DIY info to follow
532nm 50mw DPSS module LASERSMAN Freeby review to follow...
638nm mits300 671ma 500mw C6 cree
638nm mits500 WF-501B 1150mw
638nm mits500 C2 1450ma X-drive 1100mw
685nm 29ma mogasm linear 17mw C6 Cree Aurora
Kizdawg is offline   Reply With Quote
Old 08-04-2012, 12:57 AM #211
tsteele93's Avatar
Class 3R Laser
 
Join Date: Dec 2011
Location: South Cackalackey, USA
Posts: 2,065
Rep Power: 321
tsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond repute
tsteele93 tsteele93 is offline
Class 3R Laser
tsteele93's Avatar
 
Join Date: Dec 2011
Location: South Cackalackey, USA
Posts: 2,065
Rep Power: 321
tsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond reputetsteele93 has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

A few thoughts, these are expensive little boogers, don't forget to use ti's sample program. I believe you can get three free per month.

Kent, I have some of that flux but I'm not sure how you are using it... You still need solder paste of course. I think the tacky flux is for resoldering or using a heat gun to resolder to a pad with solder already on it.
__________________
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Tom Steele

Why I'm Here

405nm tsteele93 12x build @ 545mW

445nm Survival Laser @ 1.25W - GIFTED
445nm Stainless Steel Monster with H140 diode @1.62A - 2.15W!
450nm rhd single mode @ 190mW

532nm O-like 50 mW pen from Cajun Lasers - small dot, tight beam!
532nm O-like Crown, rated @ 400mW, metered @ ~450mW with AW battery!
532nm O-like Crown rated @ 500mW, not yet tested
532nm RPL-165 @ 204mW
532nm RPL-375 @ 427mW

635nm rhd Lipstick Tube @ ~485+ mW
638nm Fat Boy @ 825mW - custom build

650nm Bolly BL-8006 @ 319mW

Laser Safety and Eye Injury
tsteele93 is offline   Reply With Quote
Old 08-04-2012, 02:49 AM #212
Kizdawg's Avatar
Class 2M Laser
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Kizdawg Kizdawg is offline
Class 2M Laser
Kizdawg's Avatar
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

See I thaught the tacky flux was for under the IC to hold it in place..
__________________
405nm PHR-805T UniqueFire A10-B 100ma mogasm linear
405nm 600mw S06J C6 cree
445nm A140 1.35A 1.7W guidesman with G2
445nm 2.5W+ G-2 H1600 in a copper axis 1800ma Mogasm linear 2x AR16340's in a guidesman
445nm 9mm Blitzbuck V3 2.8A Saik 2.9W
445 800mw 9mm in a RHD MOD9 a pollished stainless auraura sh-032 667ma benboost
450nm Osram PL450 301mw in a powerlight B50 Host 400ma microboost
450nm Osram PLTB450 1.7W in a Bigboy Host 1650ma FMT driver
532nm 80mw DPSS DIY info to follow
532nm 50mw DPSS module LASERSMAN Freeby review to follow...
638nm mits300 671ma 500mw C6 cree
638nm mits500 WF-501B 1150mw
638nm mits500 C2 1450ma X-drive 1100mw
685nm 29ma mogasm linear 17mw C6 Cree Aurora
Kizdawg is offline   Reply With Quote
Old 08-04-2012, 07:11 AM #213
foulmist's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
foulmist foulmist is offline
Class 3R Laser
foulmist's Avatar
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

I am not sure what you mean by tacky? anyway if that is the stuff that is like semitransparent paste then that is just flux that helps wetting the joints and makes soldering easier. It's already in the solder paste but when reworking or soldering on dry joints it's a must.

I don't know how are you going to use it in an oven or with solder paste. I never use solder paste. I just use tacky paste and solder wire to tin all the pads. Remove the old paste, put a new coat on the tinned pads, put the components on (the paste holds them in place). Reflow. Done. I like it that way
foulmist is offline   Reply With Quote
Old 08-04-2012, 12:57 PM #214
Kizdawg's Avatar
Class 2M Laser
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Kizdawg Kizdawg is offline
Class 2M Laser
Kizdawg's Avatar
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

The tacky flux is red Jeff FP sells it and it is for reflowing Er re-working. This stuff is like glue very thick and sticky from what I understand of it you can use it to hold your parts in place when you reflow you do still need solder paste. I dont know how to use it properly was kind of hoping some of you had used it in the past. But that was the understanding I got from jeff.

I think tsteele may have hit it onthe head. could be for reworking boards that allready have been soldered b4. I just thaught that it may be helpfull with this chip. I thaught that it could be used at the end after all the paste was applied on the ic just put a dab on the corners of teh TPS heatsink pad and it would help hold it in place then reflow it. Maybe I just need a better magnifying glass and a smaller tip for my solder paste.
__________________
405nm PHR-805T UniqueFire A10-B 100ma mogasm linear
405nm 600mw S06J C6 cree
445nm A140 1.35A 1.7W guidesman with G2
445nm 2.5W+ G-2 H1600 in a copper axis 1800ma Mogasm linear 2x AR16340's in a guidesman
445nm 9mm Blitzbuck V3 2.8A Saik 2.9W
445 800mw 9mm in a RHD MOD9 a pollished stainless auraura sh-032 667ma benboost
450nm Osram PL450 301mw in a powerlight B50 Host 400ma microboost
450nm Osram PLTB450 1.7W in a Bigboy Host 1650ma FMT driver
532nm 80mw DPSS DIY info to follow
532nm 50mw DPSS module LASERSMAN Freeby review to follow...
638nm mits300 671ma 500mw C6 cree
638nm mits500 WF-501B 1150mw
638nm mits500 C2 1450ma X-drive 1100mw
685nm 29ma mogasm linear 17mw C6 Cree Aurora

Last edited by Kizdawg; 08-04-2012 at 03:57 PM. Reason: comments...
Kizdawg is offline   Reply With Quote
Old 08-04-2012, 04:09 PM #215
foulmist's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
foulmist foulmist is offline
Class 3R Laser
foulmist's Avatar
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

a little paste goes a long way. Use little dips on the pads and it will do the trick.

Quote:
Originally Posted by Kizdawg View Post
The tacky flux is red Jeff FP sells it and it is for reflowing Er re-working. This stuff is like glue very thick and sticky from what I understand of it you can use it to hold your parts in place when you reflow you do still need solder paste. I dont know how to use it properly was kind of hoping some of you had used it in the past. But that was the understanding I got from jeff.

I think tsteele may have hit it onthe head. could be for reworking boards that allready have been soldered b4. I just thaught that it may be helpfull with this chip. I thaught that it could be used at the end after all the paste was applied on the ic just put a dab on the corners of teh TPS heatsink pad and it would help hold it in place then reflow it. Maybe I just need a better magnifying glass and a smaller tip for my solder paste.
foulmist is offline   Reply With Quote
Old 08-04-2012, 04:27 PM #216
Kizdawg's Avatar
Class 2M Laser
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Kizdawg Kizdawg is offline
Class 2M Laser
Kizdawg's Avatar
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

I think little dips was what I was trying to do.. I baught a paste syringe It is really hard to press it out expecially with a small tip it makes the whole process for me a little shaky when your trying to squeeze it out. I keep it in ziplocks in the refrigerator. and let it warm up before I use it but it is still hard to press it out.. maybe I should press some out onto a business card first and work it a bit then use a toothpic or something to apply the paste..
__________________
405nm PHR-805T UniqueFire A10-B 100ma mogasm linear
405nm 600mw S06J C6 cree
445nm A140 1.35A 1.7W guidesman with G2
445nm 2.5W+ G-2 H1600 in a copper axis 1800ma Mogasm linear 2x AR16340's in a guidesman
445nm 9mm Blitzbuck V3 2.8A Saik 2.9W
445 800mw 9mm in a RHD MOD9 a pollished stainless auraura sh-032 667ma benboost
450nm Osram PL450 301mw in a powerlight B50 Host 400ma microboost
450nm Osram PLTB450 1.7W in a Bigboy Host 1650ma FMT driver
532nm 80mw DPSS DIY info to follow
532nm 50mw DPSS module LASERSMAN Freeby review to follow...
638nm mits300 671ma 500mw C6 cree
638nm mits500 WF-501B 1150mw
638nm mits500 C2 1450ma X-drive 1100mw
685nm 29ma mogasm linear 17mw C6 Cree Aurora

Last edited by Kizdawg; 08-04-2012 at 04:28 PM.
Kizdawg is offline   Reply With Quote
Old 08-04-2012, 04:42 PM #217
foulmist's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
foulmist foulmist is offline
Class 3R Laser
foulmist's Avatar
 
Join Date: Mar 2011
Location: Smolyan, Bulgaria
Posts: 1,076
Rep Power: 107
foulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond reputefoulmist has a reputation beyond repute
Send a message via Skype™ to foulmist
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

yeah I got mine in little box type and apply it with a screwdriver
foulmist is offline   Reply With Quote
Old 08-04-2012, 04:52 PM #218
Kizdawg's Avatar
Class 2M Laser
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Kizdawg Kizdawg is offline
Class 2M Laser
Kizdawg's Avatar
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

I am telling you it's hard trying to squeese it out I have had to wipe off a board a couple times cuz I screwed up... I am going to try it that way next time. The only way I have ever seen it applied was with a stencil so I'm just doin my best to get it on there corectly. I do need a bigger magnifying glass with a light too because it's very hard for me to see it all through the mag that came with my helping hands..
__________________
405nm PHR-805T UniqueFire A10-B 100ma mogasm linear
405nm 600mw S06J C6 cree
445nm A140 1.35A 1.7W guidesman with G2
445nm 2.5W+ G-2 H1600 in a copper axis 1800ma Mogasm linear 2x AR16340's in a guidesman
445nm 9mm Blitzbuck V3 2.8A Saik 2.9W
445 800mw 9mm in a RHD MOD9 a pollished stainless auraura sh-032 667ma benboost
450nm Osram PL450 301mw in a powerlight B50 Host 400ma microboost
450nm Osram PLTB450 1.7W in a Bigboy Host 1650ma FMT driver
532nm 80mw DPSS DIY info to follow
532nm 50mw DPSS module LASERSMAN Freeby review to follow...
638nm mits300 671ma 500mw C6 cree
638nm mits500 WF-501B 1150mw
638nm mits500 C2 1450ma X-drive 1100mw
685nm 29ma mogasm linear 17mw C6 Cree Aurora
Kizdawg is offline   Reply With Quote
Old 08-05-2012, 06:56 PM #219
laserluke's Avatar
Class 1M Laser
 
Join Date: Mar 2012
Posts: 173
Rep Power: 21
laserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant future
laserluke laserluke is offline
Class 1M Laser
laserluke's Avatar
 
Join Date: Mar 2012
Posts: 173
Rep Power: 21
laserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant futurelaserluke has a brilliant future
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

To anyone interested:
I have prepared a 12.8x12.5mm square version of this driver.
Here is the thread
-Luke

Last edited by laserluke; 08-06-2012 at 12:12 AM.
laserluke is offline   Reply With Quote
Old 08-05-2012, 06:58 PM #220
gillza's Avatar
Class 2M Laser
 
Join Date: Jul 2010
Location: Philadelphia, Pa
Posts: 598
Rep Power: 28
gillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant future
gillza gillza is offline
Class 2M Laser
gillza's Avatar
 
Join Date: Jul 2010
Location: Philadelphia, Pa
Posts: 598
Rep Power: 28
gillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant futuregillza has a brilliant future
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

Awesome!

Building this driver is my next step after putting together DIY LPM
__________________
Never knows best

My lasers:

405nm : PHR-803t in Dorcy Jr. Old Style with Ehgemus heatsink: 102mW
405nm : Bluray in SAIK SA-305 at 745ma: 980mW
445nm : Guidesman Dual E-Drive: 1.6W
650nm : LPC-815 @ 0.45A in Ehgemus Host Easy Build: 293mW

List of 12x 405nm 5.6mm diode builds

Last edited by gillza; 08-05-2012 at 06:58 PM.
gillza is offline   Reply With Quote
Old 08-05-2012, 11:14 PM #221
Kizdawg's Avatar
Class 2M Laser
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Kizdawg Kizdawg is offline
Class 2M Laser
Kizdawg's Avatar
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

For sure Luke! Allway's love to see your new work... How's the 6W going?

I got my Ophir wired 120v-12V 1A the other day and I must say it zeros out now and it never really did with the 9V batteries. It used to sit at about 10mw ish.. now it sits at 1 to -1mw
__________________
405nm PHR-805T UniqueFire A10-B 100ma mogasm linear
405nm 600mw S06J C6 cree
445nm A140 1.35A 1.7W guidesman with G2
445nm 2.5W+ G-2 H1600 in a copper axis 1800ma Mogasm linear 2x AR16340's in a guidesman
445nm 9mm Blitzbuck V3 2.8A Saik 2.9W
445 800mw 9mm in a RHD MOD9 a pollished stainless auraura sh-032 667ma benboost
450nm Osram PL450 301mw in a powerlight B50 Host 400ma microboost
450nm Osram PLTB450 1.7W in a Bigboy Host 1650ma FMT driver
532nm 80mw DPSS DIY info to follow
532nm 50mw DPSS module LASERSMAN Freeby review to follow...
638nm mits300 671ma 500mw C6 cree
638nm mits500 WF-501B 1150mw
638nm mits500 C2 1450ma X-drive 1100mw
685nm 29ma mogasm linear 17mw C6 Cree Aurora
Kizdawg is offline   Reply With Quote
Old 08-08-2012, 08:33 PM #222
Kizdawg's Avatar
Class 2M Laser
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Kizdawg Kizdawg is offline
Class 2M Laser
Kizdawg's Avatar
 
Join Date: Feb 2012
Location: Runnin Back to Saskatoon!
Posts: 977
Rep Power: 61
Kizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond reputeKizdawg has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

Well I recieved my driver back from Toma today it's working much better now. I think it is inspireing me to try it on the 9mm at max out with this resistor to see what I can get. I am currently recharging some batteries and have been playing with a few semi charged ones and have seen just over 2A on one most have been sitting arround 1850ma. I wont call my mm the most accurate either as it's 9V dies my readings change a bit I want to get a 9V adapter for it so it stay's stable. I have a host and h1600 kicking arround I may use it on too I duno yet but I am definately going to test it out a bit tonight..

haha funny how batteries react.. I tested a bunch I had here from 16340's 18650's and 14500's and there is one little freak of a 14500 that is making this output about 70ma more than all the rest and it is sitting at 3.86V some of the others are above 4V.. with it were sitting 2.36W with the rest it's all arround 2.25-2.3W lol.. I'm still waiting for the samsung 3000mah to charge..
__________________
405nm PHR-805T UniqueFire A10-B 100ma mogasm linear
405nm 600mw S06J C6 cree
445nm A140 1.35A 1.7W guidesman with G2
445nm 2.5W+ G-2 H1600 in a copper axis 1800ma Mogasm linear 2x AR16340's in a guidesman
445nm 9mm Blitzbuck V3 2.8A Saik 2.9W
445 800mw 9mm in a RHD MOD9 a pollished stainless auraura sh-032 667ma benboost
450nm Osram PL450 301mw in a powerlight B50 Host 400ma microboost
450nm Osram PLTB450 1.7W in a Bigboy Host 1650ma FMT driver
532nm 80mw DPSS DIY info to follow
532nm 50mw DPSS module LASERSMAN Freeby review to follow...
638nm mits300 671ma 500mw C6 cree
638nm mits500 WF-501B 1150mw
638nm mits500 C2 1450ma X-drive 1100mw
685nm 29ma mogasm linear 17mw C6 Cree Aurora

Last edited by Kizdawg; 08-08-2012 at 09:02 PM.
Kizdawg is offline   Reply With Quote
Old 09-03-2012, 09:58 PM #223
Hiemal's Avatar
Class 3R Laser
 
Join Date: Dec 2011
Location: Houston, TX
Posts: 1,449
Rep Power: 311
Hiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond repute
Hiemal Hiemal is offline
Class 3R Laser
Hiemal's Avatar
 
Join Date: Dec 2011
Location: Houston, TX
Posts: 1,449
Rep Power: 311
Hiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond reputeHiemal has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

Has anyone tested this driver for current spikes out of curiousity? I'm using a similar chip and the LT6106, and I'm having problems with startup spikes.
__________________
formerly Le Quack


Drivers and Stuff

Superboost Driver (5.5+ amp capability) End all for Boosting!

MicroSized Boost Driver

Low Dropout Linear Driver


Any electronics related questions?

Send me a PM and I'll try my best to answer!
Hiemal is offline   Reply With Quote
Old 09-03-2012, 10:00 PM #224
AnthoT's Avatar
Class 3R Laser
 
Join Date: Jan 2012
Location: Canada
Posts: 2,137
Rep Power: 826
AnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond repute
AnthoT AnthoT is offline
Class 3R Laser
AnthoT's Avatar
 
Join Date: Jan 2012
Location: Canada
Posts: 2,137
Rep Power: 826
AnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond reputeAnthoT has a reputation beyond repute
Default Re: 17mm buck-boost driver (TPS63020 and LT6106)

Page 8 post # 193 it was scoped
__________________
FTLasers
AnthoT is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


LinkBacks (?)
LinkBack to this Thread: http://laserpointerforums.com/f67/17mm-buck-boost-driver-tps63020-lt6106-74139.html
Posted By For Type Date
3x Nichia 1x 18650er EDC-Fluter | Taschenlampen Forum This thread Refback 02-12-2017 04:07 AM
TPS63020 driver for laser 445nm | LASERS.ORG.RU This thread Refback 02-14-2016 12:06 AM
ATNEL tech-forum ? Szukam biblioteki TPS63020. - forum.atnel.pl This thread Refback 04-01-2015 09:55 PM
3x Nichia 1x 18650er EDC-Fluter - Seite 4 This thread Refback 04-28-2014 09:02 PM
Кастомные санвэйчики с триплами Ничий. Изучение спроса. - Разработки от МОНАРХ и AVSel - Страница 109 - FONAREVKA.RU - Всё о фонарях и осветительной технике This thread Refback 07-29-2013 01:12 PM










Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 01:22 AM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC