Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

EL Wire - Amazing and unique light source

ElectricPlasma

ElectricPlasma

0
Joined
Dec 11, 2015
Messages
1,628
Points
113
My local electronics store started carrying EL Wire, and the whole range of EL - Pads, tape, wire, adapters and drivers etc... I happily found out when receiving their flyer and went to pick some up ASAP. I've had my eye on EL wire for a very long time, so this was pretty exciting to me. I can easily say EL wire is one of my favourite aesthetic lights sources. Here's a couple pictures:

I opted for light blue:

5d9ftl.jpg


<wtf>

Outfitted it on my stairs:

t6ysus.jpg


Really cool stuff. I'll definitely be obtaining more EL in the future!

-E.P.
 
Last edited:





I really like the staircase application.

I suppose it makes very good general orientation lighting, perhaps when combined with a daylight/motion sensor it would light up stuff as you move around your house at night without the need to put the main lights on.

Is this stuff by any means weatherproof? Outdoor applications seem cool as well ;)
 
What the hell is that in my thread? :crackup: :crackup:

1zxxrir.png


Looks like a glitch with tinypic? lol

Benm, thanks for the feedback, the staircase idea came to me when I saw a notch in the molding all the way through, and was perfect for the EL wire. I actually do believe it is weatherproof, and if not waterproof than water resistant, though the driver/converter would need a bit of modification for it to be completely sealed, especially as it's high voltage.
 
I was just wondering about how weatherproof the glowing part of the wire is. I'm sure the electronics are not suitable for humid environments given the high voltage and frequentcy operation, but that is not really a problem.

For something like a garden application you could probably just put some black heatshrink around any part of the EL wire that you don't want to be visible, leaving the driver inside the house, barn etc.

Given the high voltage inside the visible part of the wire i wondered how well that would fare outdoors. Not that it would be impossible to put another layer of protection like a transparent silicone hose around it, but just curious ;)
 
Benm said:
I was just wondering about how weatherproof the glowing part of the wire is. I'm sure the electronics are not suitable for humid environments given the high voltage and frequentcy operation, but that is not really a problem.

For something like a garden application you could probably just put some black heatshrink around any part of the EL wire that you don't want to be visible, leaving the driver inside the house, barn etc.

Given the high voltage inside the visible part of the wire i wondered how well that would fare outdoors. Not that it would be impossible to put another layer of protection like a transparent silicone hose around it, but just curious ;)
Click to expand...

The EL wire is pretty weather resistant due to the insulation needed for high voltage. If it ends up breaking though, that's it for the phosphor. It's also a bit UV-sensitive in most cases.

That's one reason why I like the laser light dispersion fiber. It's much more flexible, more durable, thinner, and has more color options. Not cheap for hobbyists yet though. :(
 
Last edited:
Rivem said:
If it ends up breaking though, that's it for the phosphor.
Click to expand...

I had thought it can be cut to size, as long as it's plugged at the end so the circuit is completed? Let me know if I'm mistaken, but I'm sure there's some way. :thinking:
 
ElectricPlasma said:
I had thought it can be cut to size, as long as it's plugged at the end so the circuit is completed? Let me know if I'm mistaken, but I'm sure there's some way. :thinking:
Click to expand...

Sorry. Just realized how vague that was. :p

You can do that. It's when the outer insulation gets broken or the ends leak and the phosphor gets a little wet that you get problems.
 
Last edited:
The thinner the EL wire the more of a pain it is to cut to size and terminate as the outer wires are very thin and break easily .

When I used 2.3mm EL wire it wasn't to bad .
 
Would that be a problem cutting down an existing piece with a connector on one end to size as well, or is that quite easy to do with something sharp (razerblade, x-acto etc) and then dipping the cut end in some resin to seal it?

I can imagine it would be difficult to use the remaining bit, but that wouldn't be much of an issue if i could buy for example 5 meters of it and just cut it down to the 4 required, descarding the left over meter.
 
A sharp set of cutters is all I used and it worked well . Using short pieces is easy as on my EL VU meters I used 10 pieces only 22cm long plus 1cm termination , Using pieces down to 5cm long is possible its just fiddly

IMG_0666[1] by TwirlyWhirly555, on Flickr
 
Last edited:
Rivem: "That's one reason why I like the laser light dispersion fiber. It's much more flexible, more durable, thinner, and has more color options. Not cheap for hobbyists yet though."

You can sand regular PMMA fiber optic with 400-600 grit sandpaper and it makes very good laser dispersion fiber. And it's dirt cheap!

il_fullxfull.463525284_7i2e.jpg
 
Last edited:
WizardG said:
Rivem: "That's one reason why I like the laser light dispersion fiber. It's much more flexible, more durable, thinner, and has more color options. Not cheap for hobbyists yet though."

You can sand regular PMMA fiber optic with 400-600 grit sandpaper and it makes very good laser dispersion fiber. And it's dirt cheap!
Click to expand...

Yeah WizardG, I actually tried that on Cyparagon's suggestion a few months ago. Definitely a similar effect, but it was nowhere as even or bright as the Fibrance powered similarly was in person.

Supposedly, there's a bit more to the stuff than the fiber's surface, and it's definitely pretty different from standard optical fibers in composition.

Definitely still looks cool though, and better on the budget. :D +rep
 
You must log in or register to reply here.





Back
Top