Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Weird 445 output!

ApexProxy

ApexProxy

0
Joined
Jul 8, 2012
Messages
1,772
Points
0
There are a couple possibilities. First off is this with or without a lens?

If it is without a lens then its likely a loose window. It is also possible that there is something inside the can itself as also but its less likely than a loose window. Either way I would think your only means of repair would be to do some window surgery (if the rattle occurs when no lens is installed).
 
Last edited:





PaulorNuthn

PaulorNuthn

0
Joined
Sep 22, 2012
Messages
228
Points
28
Blord said:
I think your lens has a problem. Something is loose inside the lensbarrel.
Click to expand...



ApexProxy said:
There are a couple possibilities. First off is this with or without a lens?

If it is without a lens then its likely a loose window. It is also possible that there is something inside the can itself as also but its less likely than a loose window. Either way I would think your only means of repair would be to do some window surgery (if the rattle occurs when no lens is installed).
Click to expand...

Yeah it does it without the lens Blord, I think you're right AP.
Not looking forward to it, another one bites the dust :cryyy:
 
Blord

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
You can try remove the window of the diode. Another method beside opening the can is take a steel pointer of something and crack the glass windows. Do it very gentle. Don't touch anything on the die.
Let the glass shards fall out and you have a windowless diode.
It should solve the problem unless the die itself is damage.
 
  • Like
Reactions: JLM
PaulorNuthn

PaulorNuthn

0
Joined
Sep 22, 2012
Messages
228
Points
28
Blord said:
You can try remove the window of the diode. Another method beside opening the can is take a steel pointer of something and crack the glass windows. Do it very gentle. Don't touch anything on the die.
Let the glass shards fall out and you have a windowless diode.
It should solve the problem unless the die itself is damage.
Click to expand...

I don't have a choice, thanks Blord, I'll try it today and let you know how it goes. :beer:
 
JLM

JLM

0
Joined
Dec 4, 2011
Messages
269
Points
0
Blord said:
You can try remove the window of the diode. Another method beside opening the can is take a steel pointer of something and crack the glass windows. Do it very gentle. Don't touch anything on the die.
Let the glass shards fall out and you have a windowless diode.
It should solve the problem unless the die itself is damage.
Click to expand...

Work for my diode I broke it with a sewing needle , Thanks Blord.:p
 
awillis2589

awillis2589

0
Joined
Jun 21, 2012
Messages
2,019
Points
48
Yeah I should have tried that. I broke the glass but only after prying up the can around the glass.
 
Hiemal

Hiemal

0
Joined
Dec 27, 2011
Messages
1,443
Points
63
Blord said:
I don't think glass will melt with our handheld lasers. It needs a lot more energy to do so.
Do you ever been to a glass factory ? The heat needed for melting glass is so intense.
Click to expand...

It can happen... I accidentally got some stuff on my 405 nm diode's window, and turned it on, and found the glass had a hole melted right through it. o.o

It's so much energy concentrated in a small area. It doesn't surprise me at all.
 
JLM

JLM

0
Joined
Dec 4, 2011
Messages
269
Points
0
Le Quack said:
It can happen... I accidentally got some stuff on my 405 nm diode's window, and turned it on, and found the glass had a hole melted right through it. o.o

It's so much energy concentrated in a small area. It doesn't surprise me at all.
Click to expand...

Yes look like a hole, but I think that is possible melted dust with the glass superficial coating
 
HitShane

HitShane

0
Joined
Nov 30, 2012
Messages
655
Points
28
I would have to go over doing that (in my head) for like 2-3 days before I would actually do it... Good job.
 
ApexProxy

ApexProxy

0
Joined
Jul 8, 2012
Messages
1,772
Points
0
Interesting suggestion Blord. I like the idea of cracking the glass and shaking it out. Its less direct destruction to the diode. Though it sounds like that method might sometimes result in glass shards being left stuck inside the can. Either way, modifications to a diode is risky business.
 
DrSid

DrSid

0
Joined
Jul 17, 2010
Messages
1,506
Points
48
I wouldn't do that .. cracking glass can shoot chunks inside, and damage the diode. Did you see those thin wires ? Not mentioning chip front face, which is emitting the light and which exact geometric shape is crucial to laser output and beam cleanness. Glass should be IMHO left intact. Bending or cutting the can is relatively safe.
 
Last edited:
PaulorNuthn

PaulorNuthn

0
Joined
Sep 22, 2012
Messages
228
Points
28
DrSid said:
I would do that .. cracking glass can shoot chunks inside, and damage the diode. Did you see those thin wires ? Not mentioning chip front face, which is emitting the light and which exact geometric shape is crucial to laser output and beam cleanness. Glass should be IMHO left intact. Bending or cutting the can is relatively safe.
Click to expand...

Yep, even though I was really careful, it killed the diode.
 
PaulorNuthn

PaulorNuthn

0
Joined
Sep 22, 2012
Messages
228
Points
28
Blord, you are an absolute legend mate.

When it didn't work on the 9mm diode I thought oh well you win some you lose some, worth a try.
Last night though I found an old M140 that was throwing off a weird beam too.
As I was going to throw it away anyway I thought I'd try it again.
Well this time it worked perfectly.
It's actually throwing off one of the best beams and dot I've seen from a blue.

You da man! :worthy:
 
JLM

JLM

0
Joined
Dec 4, 2011
Messages
269
Points
0
PaulorNuthn said:
Blord, you are an absolute legend mate.

When it didn't work on the 9mm diode I thought oh well you win some you lose some, worth a try.
Last night though I found an old M140 that was throwing off a weird beam too.
As I was going to throw it away anyway I thought I'd try it again.
Well this time it worked perfectly.
It's actually throwing off one of the best beams and dot I've seen from a blue.

You da man! :worthy:
Click to expand...

Probably the air oxygen can oxide the diode more quickly but the beam is more powerful to the eye, probably a lot more to the LPM :whistle:.
+1 to Blord and :thanks:
 
You must log in or register to reply here.




Top