Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Turning up the power on the 400mW spartan

Joined
Jun 18, 2010
Messages
241
Points
18
In my reading I did not see any speculation that the CNI diodes where the same as the Casio, but I admit, it would make sense.
 





LSRFAQ

0
Joined
May 8, 2009
Messages
1,155
Points
83
The reason why you will only see about 400 mW out of a "corrected" laser is the easy way to correct is to mask off 2/3rds of the beam and only use the central spot. It has nothing to do with coatings or lens materials, its just simple physics, and production costs.

If you use anamorphic lensing (prisms, cylinder) it requires a huge amount of space, lots of custom glass, extra machining, and each laser needs hand adjusting to match the diode, which no manufacturer is willing to pay for. Remember pointer makers are just in it to make a buck, they do not share your enthusiasm for lasers. They are not going to pay some one to do two precision gluing steps (lens epoxy needs 40 minutes) 45 minutes apart when plenty of people will settle for 400 mW.


Masking allows them to fit the whole mess in a existing body, reducing costs.

You are now seeing the tradeoffs between desire, laws of physics, and production costs.



Steve
 
Last edited:
Joined
May 24, 2010
Messages
460
Points
0
Makes perfect sense. Oh well, I suppose I'll just buy the arctic if they email me back.
 




Top