Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database.


Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes


2.5 Watt Blue Thor M 2 Laser Pointer











Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > 445nm Lasers

List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 04-21-2017, 09:47 AM #33
Lifetime17's Avatar
Class 3B Laser
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,604
Rep Power: 6444
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Lifetime17 Lifetime17 is offline
Class 3B Laser
Lifetime17's Avatar
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,604
Rep Power: 6444
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Hi ACC,
So Sorry it's still 0.5 . take a look here . Its all i can say.Hope it comes out well for you buddy.

Rich
Attached Thumbnails
NUBM44 Handheld Build - Stainless steel-img_2961.jpg  


__________________
Hosts/Heat Sinks/Focus Adapter/Lasers for Sale.
Lifetime17 is offline   Reply With Quote










Old 04-21-2017, 10:23 AM #34
Accutronitis's Avatar
Class 2M Laser
 
Join Date: Dec 2016
Location: Las Vegas
Posts: 813
Rep Power: 2219
Accutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond repute
Accutronitis Accutronitis is online now
Class 2M Laser
Accutronitis's Avatar
 
Join Date: Dec 2016
Location: Las Vegas
Posts: 813
Rep Power: 2219
Accutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Quote:
Originally Posted by Lifetime17 View Post
Hi ACC,
So Sorry it's still 0.5 . take a look here . Its all i can say.Hope it comes out well for you buddy.

Rich
Your right and I'm wrong, It's definitely this one buddy....



I don't know what I was thinking...... While your at it can you tell BowtieGuy so he knows ? He still thinks it's 0.75mm.....

Quote:
Originally Posted by BowtieGuy View Post
Hi Red, I've recently received my J/L 10X, and I've measured the diameters, and the thread pitch of both sizes of threads on the B.E.
I also needed to know these sizes, since I'll be using this on a variety lasers, and will need to make adapters to suit.
I've found one old adapter that I modified to fit this B.E. to my old style J/L PLE, it uses the larger size thread, thus eliminating any radial adjustment possibilities, but it seems to aligned pretty well as is.
I may make more of this style adapter for other hosts. ( I'll add a pic later).
  • The smaller diameter thread that is made to attach directly to the J/L PLE Pro is an (18mm x 0.75mm) thread. The actual diameter measures 17.880mm, this is normal for clearance purposes.
  • The larger diameter thread that attaches to the alignment ring is a (25mm x 0.75mm) thread. It measures 24.80mm, also for proper clearance.

These are a much finer than normal thread for these diameters, and taps are hard to find, and are fairly expensive. The larger size may have to be custom made. It may be easier to just cut these threads on a lathe, if available.
If you find a cheap source for these size taps let me know!




__________________
The Accutron Resource Forum your source for the best & most up to date Accuton 214 info On The Web Please Visit http://accutronfacts.freeforums.net/

---------------------------------------------------------------------------------------------------------------------------------------
My very short laser collection (for now)

Thor "Saber" Americanised Thor M II - M462 2.2 Watt 462mn Diode W/Super X-Drive @ 1.8 Amps - DTR G-2 lens - JL 10X Beam Expander Class IV

"Thor's Hammer" Americanised TLY-L201 Host Build W/Old School NASA Type Safety Switch - DTR NUBM44 7+ Watt 450nm Diode In 25mm Copper Module W/Driver - DTR G-2 lens - "Milos" Triple Cylindrical Lens Fast Axis Correction Class IV

303 Prome Star Series Green Laser 532nm 80mW DPSS Class IIIb

Last edited by Accutronitis; 04-21-2017 at 10:31 AM.
Accutronitis is online now   Reply With Quote
Old 04-21-2017, 03:48 PM #35
Lifetime17's Avatar
Class 3B Laser
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,604
Rep Power: 6444
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Lifetime17 Lifetime17 is offline
Class 3B Laser
Lifetime17's Avatar
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,604
Rep Power: 6444
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Hi Acc
No biggie pal were all here to help one another good or bad. bow tie will probably read this so I'll wait and see if he does

Rich
__________________
Hosts/Heat Sinks/Focus Adapter/Lasers for Sale.
Lifetime17 is offline   Reply With Quote
Old 04-21-2017, 04:39 PM #36
Accutronitis's Avatar
Class 2M Laser
 
Join Date: Dec 2016
Location: Las Vegas
Posts: 813
Rep Power: 2219
Accutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond repute
Accutronitis Accutronitis is online now
Class 2M Laser
Accutronitis's Avatar
 
Join Date: Dec 2016
Location: Las Vegas
Posts: 813
Rep Power: 2219
Accutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Quote:
Originally Posted by Lifetime17 View Post
Hi Acc
No biggie pal were all here to help one another good or bad. bow tie will probably read this so I'll wait and see if he does

Rich
When I said I was buy a 0.50 tap he was the one that told me I was buying the wrong tap.....
__________________
The Accutron Resource Forum your source for the best & most up to date Accuton 214 info On The Web Please Visit http://accutronfacts.freeforums.net/

---------------------------------------------------------------------------------------------------------------------------------------
My very short laser collection (for now)

Thor "Saber" Americanised Thor M II - M462 2.2 Watt 462mn Diode W/Super X-Drive @ 1.8 Amps - DTR G-2 lens - JL 10X Beam Expander Class IV

"Thor's Hammer" Americanised TLY-L201 Host Build W/Old School NASA Type Safety Switch - DTR NUBM44 7+ Watt 450nm Diode In 25mm Copper Module W/Driver - DTR G-2 lens - "Milos" Triple Cylindrical Lens Fast Axis Correction Class IV

303 Prome Star Series Green Laser 532nm 80mW DPSS Class IIIb

Last edited by Accutronitis; 04-21-2017 at 04:39 PM.
Accutronitis is online now   Reply With Quote
Old 04-21-2017, 04:41 PM #37
Ricker's Avatar
Class 2 Laser
 
Join Date: Oct 2015
Location: Bangor, Maine
Posts: 416
Rep Power: 2013
Ricker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond repute
Ricker Ricker is online now
Class 2 Laser
Ricker's Avatar
 
Join Date: Oct 2015
Location: Bangor, Maine
Posts: 416
Rep Power: 2013
Ricker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond reputeRicker has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

WOW! EP, that is soooo beautiful! I am so damn impressed!! I would kill for your skills on the lathe good sir!
__________________

Safety: Eagle Pair® 190-540nm & 800-2000nm Laser Safety Goggles
Misc. Hardware:TENMA 35V/5A Variable Power Supply.
FLIR One Thermal Imaging Camera. Fluke 115 True RMS Digial Multimeter. And Much More!



->My Thermal Imaged Lasers Thread<-
->My First Build!<-
NEW! 2/18/16
Ricker is online now   Reply With Quote
Old 04-21-2017, 04:44 PM #38
Lifetime17's Avatar
Class 3B Laser
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,604
Rep Power: 6444
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Lifetime17 Lifetime17 is offline
Class 3B Laser
Lifetime17's Avatar
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,604
Rep Power: 6444
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Hi Acc
You will need an 24.5 mm drill for it also. But you will have to enlarge the hole in steps a finish it with the 24.5
MRich
__________________
Hosts/Heat Sinks/Focus Adapter/Lasers for Sale.
Lifetime17 is offline   Reply With Quote
Old 04-21-2017, 04:54 PM #39
ElectricPlasma's Avatar
Super Moderator
 
Join Date: Dec 2015
Location: Southern Ontario, Canada
Posts: 1,157
Rep Power: 6833
ElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond repute
ElectricPlasma ElectricPlasma is offline
Super Moderator
ElectricPlasma's Avatar
 
Join Date: Dec 2015
Location: Southern Ontario, Canada
Posts: 1,157
Rep Power: 6833
ElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Quote:
Originally Posted by Ricker View Post
WOW! EP, that is soooo beautiful! I am so damn impressed!! I would kill for your skills on the lathe good sir!
Thanks a lot Ricker, I try my best!
__________________

I'm selling some custom machined hosts. Click here to take a look!
__________________

-====•=[]
────────────────────────────────────────✺

632.8nm: Melles Griot HeNe, 1mW
532nm: Custom made GITD Pocket laser: ~133mW
532nm: Chrome laser pen: ~50mW
532nm: eBay 303: ~60mW
465nm: 07E Laser Box Build: 4W
462nm: M462 Pocket Build: 1W
450nm: Stainless Steel NUBM44 Handheld: 6.8W
445nm Pocket Series from Podo (Sanwu): 500mW
405nm: eBay pen

Keep yourself safe. *link*
-====•=[]
────────────────────────────────────────✺
ElectricPlasma is offline   Reply With Quote
Old 04-21-2017, 04:56 PM #40
Accutronitis's Avatar
Class 2M Laser
 
Join Date: Dec 2016
Location: Las Vegas
Posts: 813
Rep Power: 2219
Accutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond repute
Accutronitis Accutronitis is online now
Class 2M Laser
Accutronitis's Avatar
 
Join Date: Dec 2016
Location: Las Vegas
Posts: 813
Rep Power: 2219
Accutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

JetLasers 10X RCB

Start at post 41.......

Quote:
Originally Posted by BowtieGuy View Post
Accutronitis, I've had a chance to re-check my measurments on my PL-E Pro 10X B.E., and as the photos below illustrate, the thread pitch is 0.75mm, and not 0.50mm as shown on the J/L print.
So, as I mentioned in my previous post, both the 25mm B.E. thread, and the 18mm adapter thread (on my B.E.) are a 0.75mm pitch.

I doubt that Jetlasers has changed their thread pitch, more than likely it's just a typo.
I will contact Gray and let him check it out.


My B.E. threads being measured with a Starret thread gauge.


The B.E. thread as compared to a 0.5mm thread on a lens barrel, definitely a courser pitch.
Quote:
Originally Posted by BowtieGuy View Post
Accutronitis, I've had a chance to re-check my measurments on my PL-E Pro 10X B.E., and as the photos below illustrate, the thread pitch is 0.75mm, and not 0.50mm as shown on the J/L print.
So, as I mentioned in my previous post, both the 25mm B.E. thread, and the 18mm adapter thread (on my B.E.) are a 0.75mm pitch.

I doubt that Jetlasers has changed their thread pitch, more than likely it's just a typo.
I will contact Gray and let him check it out.


My B.E. threads being measured with a Starret thread gauge.


The B.E. thread as compared to a 0.5mm thread on a lens barrel, definitely a courser pitch.
Quote:
Originally Posted by BowtieGuy View Post
Accutronitis, all I can say is that my particular B.E. is not 0.5mm, that pic with the 0.75 was taken trying to balance the gauge on a box top while I photographed it. I know it doesn't look perfect, but it's damn close, you also saw the other photo with the 0.5mm lens barrel next to it, and you can see that those two threads aren't anywhere close to the same.

Now, that is not saying that they are not 0.5mm now, they may very well be!

Please be sure and let us know what yours turns out to be when you get it today; if you don't have your tap yet, just hold a 9 x 0.5mm lens holder up next to it to compare pitches.

Good luck with your B.E. adapter!
Quote:
Originally Posted by Accutronitis View Post
This is a "I told you so" moment for BowtieGuy Because I have my beam expander and the M25 x 0.50 tap that I bought just for this beam expanders thread BUT they are NOT the same ! BowtieGuy was right ! The threads are NOT M25 x 0.50 Jetlasers !

I'm assuming BowtieGuy was also right that the threads are in fact M25 x 0.75 like he tried to tell us !

Anything you would like to add Jetlasers ?
Quote:
Originally Posted by RedCowboy View Post
I just checked my JET 10X and it's NOT 0.5 pitch either, the threads are wider spaced than 0.5 and less than 1.0, I don't have a 0.75 pitch tap but BowTieGuy's gauge looks correct.

On a separate note I think the 3X sanwu is M11 x 0.5
Quote:
Originally Posted by BowtieGuy View Post
Accutronitis, I'm glad to see that you received your 10X B.E., unfortunately, yours is more than likely just like mine; I was kind of hoping that J/L had changed their product, and that the print on their site was accurite.

That dimension on the print is probably just a mistake that they didn't catch, there are so many threads on these optical components that do use the 0.5mm pitch, that they just slipped up. I've got to imagine that there aren't too many of their customers who even look at that print, let alone use it to make their own parts from.




Thanks Red.
Seeing that you mentioned the M11 x 0.5 threads on the Sanwu, I was just thinking, if I'm not mistaken, the threads on the back side of the 12mm copper modules are 11 x 0.5mm also.
__________________
The Accutron Resource Forum your source for the best & most up to date Accuton 214 info On The Web Please Visit http://accutronfacts.freeforums.net/

---------------------------------------------------------------------------------------------------------------------------------------
My very short laser collection (for now)

Thor "Saber" Americanised Thor M II - M462 2.2 Watt 462mn Diode W/Super X-Drive @ 1.8 Amps - DTR G-2 lens - JL 10X Beam Expander Class IV

"Thor's Hammer" Americanised TLY-L201 Host Build W/Old School NASA Type Safety Switch - DTR NUBM44 7+ Watt 450nm Diode In 25mm Copper Module W/Driver - DTR G-2 lens - "Milos" Triple Cylindrical Lens Fast Axis Correction Class IV

303 Prome Star Series Green Laser 532nm 80mW DPSS Class IIIb

Last edited by Accutronitis; 04-21-2017 at 05:00 PM.
Accutronitis is online now   Reply With Quote
Old 04-22-2017, 09:33 AM #41
ArcticDude's Avatar
Class 2 Laser
 
Join Date: Jun 2016
Location: Fennoscandia
Posts: 277
Rep Power: 4032
ArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond repute
ArcticDude ArcticDude is offline
Class 2 Laser
ArcticDude's Avatar
 
Join Date: Jun 2016
Location: Fennoscandia
Posts: 277
Rep Power: 4032
ArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Sorry EP for trashing your thread..

I made few observations about Sanwu BE..

Stealth Vape 12mm switch nut is fitting perfectly on Sanwu 3X BE.
My gauge (Made in Germany this time , I'm never gonna rely on chinese tools again) is saying M12 x 0.75 and Stealth Vape technical drawing says M12 X 0.75

Plus after that I noticed that Sanwu 3X BE will fit Boruit 08-3 Flashlight / Laser straight on without any adapter.. (Sold as Kinfire 08-3 also)


























I have little feeling about that Sanwu 3X BE will fit straight on some of these "Starry Cap" or "Pattern Cap" lasers:

https://www.fasttech.com/products/16...-laser-pointer
https://www.fasttech.com/products/16...flashlight-set
https://www.fasttech.com/products/0/...-laser-pointer
https://www.fasttech.com/products/0/...-laser-pointer
https://www.fasttech.com/products/0/...-zooming-laser
ArcticDude is offline   Reply With Quote
Old 04-22-2017, 01:24 PM #42
Accutronitis's Avatar
Class 2M Laser
 
Join Date: Dec 2016
Location: Las Vegas
Posts: 813
Rep Power: 2219
Accutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond repute
Accutronitis Accutronitis is online now
Class 2M Laser
Accutronitis's Avatar
 
Join Date: Dec 2016
Location: Las Vegas
Posts: 813
Rep Power: 2219
Accutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond reputeAccutronitis has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

0.50mm thread pitch is good for the collimating lens but it's just too fine of a thread pitch for the much larger accessories like a beam expander and would easily cross thread therefor a more suitable thread pitch is used such as the 0.75mm thread pitch, The much coarser thread pitch makes it much less susceptible to cross threading.....
__________________
The Accutron Resource Forum your source for the best & most up to date Accuton 214 info On The Web Please Visit http://accutronfacts.freeforums.net/

---------------------------------------------------------------------------------------------------------------------------------------
My very short laser collection (for now)

Thor "Saber" Americanised Thor M II - M462 2.2 Watt 462mn Diode W/Super X-Drive @ 1.8 Amps - DTR G-2 lens - JL 10X Beam Expander Class IV

"Thor's Hammer" Americanised TLY-L201 Host Build W/Old School NASA Type Safety Switch - DTR NUBM44 7+ Watt 450nm Diode In 25mm Copper Module W/Driver - DTR G-2 lens - "Milos" Triple Cylindrical Lens Fast Axis Correction Class IV

303 Prome Star Series Green Laser 532nm 80mW DPSS Class IIIb

Last edited by Accutronitis; 04-22-2017 at 01:27 PM.
Accutronitis is online now   Reply With Quote
Old 04-22-2017, 05:14 PM #43
ElectricPlasma's Avatar
Super Moderator
 
Join Date: Dec 2015
Location: Southern Ontario, Canada
Posts: 1,157
Rep Power: 6833
ElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond repute
ElectricPlasma ElectricPlasma is offline
Super Moderator
ElectricPlasma's Avatar
 
Join Date: Dec 2015
Location: Southern Ontario, Canada
Posts: 1,157
Rep Power: 6833
ElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond reputeElectricPlasma has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Quote:
Originally Posted by ArcticDude View Post
Sorry EP for trashing your thread..
Trashing? No way, great info and conversation here. I'm following along with it all, very welcome here!
__________________

I'm selling some custom machined hosts. Click here to take a look!
__________________

-====•=[]
────────────────────────────────────────✺

632.8nm: Melles Griot HeNe, 1mW
532nm: Custom made GITD Pocket laser: ~133mW
532nm: Chrome laser pen: ~50mW
532nm: eBay 303: ~60mW
465nm: 07E Laser Box Build: 4W
462nm: M462 Pocket Build: 1W
450nm: Stainless Steel NUBM44 Handheld: 6.8W
445nm Pocket Series from Podo (Sanwu): 500mW
405nm: eBay pen

Keep yourself safe. *link*
-====•=[]
────────────────────────────────────────✺
ElectricPlasma is offline   Reply With Quote
Old 04-22-2017, 06:18 PM #44
Lifetime17's Avatar
Class 3B Laser
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,604
Rep Power: 6444
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Lifetime17 Lifetime17 is offline
Class 3B Laser
Lifetime17's Avatar
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 2,604
Rep Power: 6444
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Quote:
Originally Posted by ElectricPlasma View Post
Trashing? No way, great info and conversation here. I'm following along with it all, very welcome here!
Hi,
Sure is some great info here awesome. Thanks EP for stirring the pot.

Rich
__________________
Hosts/Heat Sinks/Focus Adapter/Lasers for Sale.
Lifetime17 is offline   Reply With Quote
Old 04-22-2017, 11:21 PM #45
RedCowboy's Avatar
Class 3B Laser
 
Join Date: Jul 2015
Location: Suburbs of Atlanta Georgia
Posts: 4,274
Rep Power: 8216
RedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond repute
RedCowboy RedCowboy is online now
Class 3B Laser
RedCowboy's Avatar
 
Join Date: Jul 2015
Location: Suburbs of Atlanta Georgia
Posts: 4,274
Rep Power: 8216
RedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond reputeRedCowboy has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

@ ArcticDude : I used that same trick on my moped muffler build, I robbed a jam nut off a toggle switch, but your material that you attach through has to be right about 1.0 - 1.5 mm thick because of that gap at the end of the BE threads and the whole threaded spout is so short, they made it hard to repurpose or it just came out that way, I love the 3X BE though.



Attached Thumbnails
NUBM44 Handheld Build - Stainless steel-sany0654.jpg  
__________________
You can not put freedom in a bag.
It is in fact an abstract concept.
Yet it is the single most valuable thing anyone has ever had.

Last edited by RedCowboy; 04-22-2017 at 11:29 PM.
RedCowboy is online now   Reply With Quote
Old Yesterday, 09:08 AM #46
ArcticDude's Avatar
Class 2 Laser
 
Join Date: Jun 2016
Location: Fennoscandia
Posts: 277
Rep Power: 4032
ArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond repute
ArcticDude ArcticDude is offline
Class 2 Laser
ArcticDude's Avatar
 
Join Date: Jun 2016
Location: Fennoscandia
Posts: 277
Rep Power: 4032
ArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond reputeArcticDude has a reputation beyond repute
Default Re: NUBM44 Handheld Build - Stainless steel

Quote:
Originally Posted by RedCowboy View Post
@ ArcticDude : I used that same trick on my moped muffler build, I robbed a jam nut off a toggle switch, but your material that you attach through has to be right about 1.0 - 1.5 mm thick because of that gap at the end of the BE threads and the whole threaded spout is so short, they made it hard to repurpose or it just came out that way, I love the 3X BE though.
Sanwu X3 can be attached Boruit even the facing plate is really thick. Sanwu 3X threadings will go from start to all the way bottom perfectly.




Just ordered Völkel M 12 x 0.75 Tap.

According to Völkel recommended tapping drill size is 11.25mm. -If drilled only 11mm hole, threads may not form properly!
ArcticDude is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On











Loading












Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 03:09 PM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC