jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
Once in a while I have to take some time and build one for myself...
I love the Stainless Steel 10440 host with the nice chrome pocket clip.
Using a SoShine 10440, which is 400mAh's capacity, I chose to give it what I would consider about max for a decent run time between charges...
Yes I could have pushed it more if I wanted to, but at this setting, I can have probably around 45 minutes between charges...
I like the AixiZ 405 lens best with these diodes. When I first did my 445 lens comparison thread, I used the AixiZ 405 lens. Then contacted AixiZ to see about getting the exact same lens assembly in a full length threaded nut. They got close with their new AixiZ 445 lens. But the AixiZ 405 is a little better. (at least 5% more power)
The only problem, is that it is in a half threaded nut. So you have to glue on the focus rings or adapters...
But still, the AixiZ 445 lens is a good option that has a full length threaded nut for easy attachment of the focus ring or EzFocus adapters...
See here for the Stainless Steel 10440 kit!
http://laserpointerforums.com/f64/fs-stainless-steel-10440-kit-awesome-45919.html
I love the Stainless Steel 10440 host with the nice chrome pocket clip.
Using a SoShine 10440, which is 400mAh's capacity, I chose to give it what I would consider about max for a decent run time between charges...
Yes I could have pushed it more if I wanted to, but at this setting, I can have probably around 45 minutes between charges...
I like the AixiZ 405 lens best with these diodes. When I first did my 445 lens comparison thread, I used the AixiZ 405 lens. Then contacted AixiZ to see about getting the exact same lens assembly in a full length threaded nut. They got close with their new AixiZ 445 lens. But the AixiZ 405 is a little better. (at least 5% more power)
The only problem, is that it is in a half threaded nut. So you have to glue on the focus rings or adapters...
But still, the AixiZ 445 lens is a good option that has a full length threaded nut for easy attachment of the focus ring or EzFocus adapters...
See here for the Stainless Steel 10440 kit!
http://laserpointerforums.com/f64/fs-stainless-steel-10440-kit-awesome-45919.html
Last edited: