"The Bullet" 445nm Laser

lazeerer · Jul 18, 2012

Hey All,

"Bullet"

Here is a Build I did about a month ago. I dint know what to do with it so i figure why not make a Laser.

THe Finish on it was not so Great so I re polished it.:drool: It is Solid Brass and has very nice weight to to it. Its a Sexy Little Guy.:san:

Here are the Details....

Spec's:

Diode - A140
Lens - Acrylic
Driver - X-Boost V7 Mini
Currant - 450mA
Power - 223mW Peak at the end of Duty cycle it is 217mW
Battery - 1x 10440 4.2v
Module - Custom Copper to fit Host
Focus Adapter - Machined Down Aixiz Ring to reveal Brass
Duty Cycle - Short 30 Seconds on Left off till cool
Switch - Twist on/off

Picutres:

I really like how this laser came out.

It even has a Key ring Hole to allow you to put it on your keys.

Though iam just going to keep it in my laser room with all my other personal lasers and collection.

I took an LPM shot but i cant find it so iam going to have to take another one tomorrow for you guys.:beer:

:thanks: For Looking.!!!

Keep on Lazing.....

lasersbee · Jul 18, 2012

Nice polished look on that Laser...
I didn't see how very small it was until I saw it in
your hand...

:gj:

Jerry

You can contact us at any time on our Website: J.BAUER Electronics

lazeerer · Jul 18, 2012

lasersbee said:
Nice polished look on that Laser...
I didn't see how very small it was until I saw it in
your hand...

:gj:

Jerry

You can contact us at any time on our Website: J.BAUER Electronics

Thanks.

Yes This guy is Small. Some of my Picture got lost so i will take a better comparison for you of its size.:beer:

jander6442 · Jul 18, 2012

nice looking.:kewlpics::worthy:keeper for sure... " X-boost huh":gj:

sinner · Jul 18, 2012

This is so beautiful i can safely say it is the most beautiful thing i have ever seen in that size, actually i myself like the brass polished too.. definitely The Best Looking sleek and stylish laser!

gillza · Jul 18, 2012

I know it is a bit off topic but it is so nice to come back to this hobby and see so much development in the area of drivers (and lasers). X-boost v7 mini! Looking forward to that one being sold in the near future!

lazeerer · Jul 18, 2012

jander6442 said:
nice looking.:kewlpics::worthy:keeper for sure... " X-boost huh":gj:

Thanks.

sinner said:
This is so beautiful i can safely say it is the most beautiful thing i have ever seen in that size, actually i myself like the brass polished too.. definitely The Best Looking sleek and stylish laser!

Really.

:thanks: Buddy. Iam really happy right now that you conceder this that high on the scale.:wave: Makes me feel good.:bowdown:

gillza said:
I know it is a bit off topic but it is so nice to come back to this hobby and see so much development in the area of drivers (and lasers). X-boost v7 mini! Looking forward to that one being sold in the near future!

It wont be done for a little while my friend. THe Mini is Really Small at 9x10mm.

Iam trying to make it even smaller at 8x8mm. There is other Great boost drivers out there like the Ben & Rhd Boost Drive "open source" and there is the FMT from foulmist which is a Buck/Boost driver.

gillza · Jul 18, 2012

@lazeerer

Thank you. I'm just glad that there is so much diversity! And I'm especially thrilled that people are working on open source buck/boost drives as well. The environment here now feels so much better than two years ago when we had 2 drives only and the maker of those drives would jump onto other people's threads and discourage them in addition to sending questioning PM's to those who supported alternative drive development.

Blord · Jul 18, 2012

No need for a target laser if you put this "Bullit" in your gun

Great build !! :beer:

Thejoker301 · Jul 18, 2012

Awesome Host ! Very nice build man !

lazeerer · Jul 18, 2012

gillza said:
@lazeerer

Thank you. I'm just glad that there is so much diversity! And I'm especially thrilled that people are working on open source buck/boost drives as well. The environment here now feels so much better than two years ago when we had 2 drives only and the maker of those drives would jump onto other people's threads and discourage them in addition to sending questioning PM's to those who supported alternative drive development.

Yes it has come a long way since then and we are no longer dependent on those 2 driver. Though they are not bad driver it was the support behind them IIRC that made alot turn there head.

Now there is plenty of driver options for everyones laser needs.

The cool part is that there is alot more to come from alot of us.:wave:

Rather then wait we Explored as a community and created some well working drivers. It could not have turned out better. IMO

TheDukeAnumber1 · Jul 19, 2012

Very nice and sleek. Lol, it's so tiny if it fell in a drink there's half a chance you would swallow it.

op:

lowell389 · Jul 19, 2012

Very cool, out of brass, I bet it has a good weight to it even though it's so small.
Good job man!

Fiddy · Jul 19, 2012

nice laser, great polish!

lazeerer · Jul 19, 2012

TheDukeAnumber1 said:
Very nice and sleek. Lol, it's so tiny if it fell in a drink there's half a chance you would swallow it. op:

Just LOL.:crackup:

Its small but its not that small. I will upload the new Pic's tonight.

lowell389 said:
Very cool, out of brass, I bet it has a good weight to it even though it's so small.
Good job man!

Sure does have weight to it. Ill weigh it for you when i get home from work.

THe brass is a Nice touch but you must keep on top of it or it will tarnish faster.

Fiddy said:
nice laser, great polish!

:thanks:

cheech226 · Jul 19, 2012

the brass looks so fine buddy, and i like to see lower powered 445's:beer:

"The Bullet" 445nm Laser

lazeerer

0

lasersbee

0

lazeerer

0

jander6442

0

sinner

0

gillza

0

lazeerer

0

gillza

0

Blord

0

Thejoker301

0

lazeerer

0

TheDukeAnumber1

0

lowell389

0

Fiddy

0

lazeerer

0

cheech226

0

Online statistics

Forum statistics

Share this page