Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > 445nm Lasers



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 05-14-2014, 08:25 PM #1
Junior Member
 
Join Date: May 2014
Posts: 3
Rep Power: 0
civiclaser is on a distinguished road
civiclaser civiclaser is offline
Junior Member
 
Join Date: May 2014
Posts: 3
Rep Power: 0
civiclaser is on a distinguished road
Default Best value & quality Lab Modules

I am currently a PhD student working on designing new diagnostic techniques for disease. I was looking into purchasing a small module lab laser at 447 nm for an experiment. Our lab purchased a laserglow unit that has a very wide (non-usable) beam profile. I was looking at Jetlasers and they seem to have nice looking units. Does anyone have experience with these? Could you point me in the right direction?


civiclaser is offline   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 05-14-2014, 10:38 PM #2
ChaosLord's Avatar
Class 2M Laser
 
Join Date: Feb 2013
Location: Louisville, KY
Posts: 763
Rep Power: 212
ChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond repute
ChaosLord ChaosLord is offline
Class 2M Laser
ChaosLord's Avatar
 
Join Date: Feb 2013
Location: Louisville, KY
Posts: 763
Rep Power: 212
ChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond repute
Default Re: Best value & quality Lab Modules

Could you give some more info on what exactly you need? How important is wavelength? I only ask because you say 447nm, and most blues in the 445-450 range will be hard to nail an exact WL. Also, if the laserglow unit has too big a beam, then they all will. The 445 and 450nm diodes used in these lasers have inherently bad beam specs. Outside of talking to a company about a special build with correction optics, I got nothing.

However, if the wavelength isn't that important, and depending on desired output power, there are several options that will have much better beam specs. Both 473nm and 488nm are a lighter blue but have better beam specs, for example.

As for Jetlasers, they are a great company and make fine lasers. However, above stated issue with 445nm lasers will still make it as unusable as the laserglow one.
__________________
405nm SkyLaser PL 300-500 - ~500mW (523mW);| SkyLaser LP 5-80 - 5mW
405nm SkyRay 12X S06J w/450mA microboost - 485mW :|: BDR-209 16X w/700mA microboost 2X in ZeroLasers SkyRay and Chunk hosts
445nm ZeroLaser 2x18650 host 9mm w/2.3A X-drive - 2.8W :|: Trustfire A8 9mm w/2.4A X-drive - "The Sentinel" ~3W
445nm JetLasers PL-E - ~1.25W (1.32W) :|: 445nm 9mm w/2.4A X-drive Kryton "the Terminator" :|: Blord 501B build - 2.1W
450nm Osram PLTB450 in SL S4 host - 1.48W :|: 450nm Osram PL450B with ~280mA microboost in C6 host - 235mWBuild here
462nm 9mm diode in ZeroLasers chunk w/1.8A X-drive :|: M462 in sinner Cypreus-II w/microboost
473nm CNI lab 40mW
520nm NDG700 @1.8A in Cypreus-IIb - 1.04W :|: PL520 w/300mA x-boost in S4 host - 102mW Build here
532nm JetLasers Ti-B - 100mW (151mW)
589nm Dragonlasers Spartan 50mW
638nm Mits in SL C6 host custom build - 677mW :|: Opnext single mode 290mA x-drive in SL Steel C6 host w/ext. copper HS - 230mW
650nm copper module in C6 host - ~300mW (230mW) Build here
650nm module in custom host - ~300mW (224mW) "LiL Red Eye" Build Here

Radiant X4 3.7W LPM
Nospin 5W LPM

Last edited by ChaosLord; 05-14-2014 at 10:41 PM.
ChaosLord is offline   Reply With Quote
Old 05-16-2014, 09:25 PM #3
Junior Member
 
Join Date: May 2014
Posts: 3
Rep Power: 0
civiclaser is on a distinguished road
civiclaser civiclaser is offline
Junior Member
 
Join Date: May 2014
Posts: 3
Rep Power: 0
civiclaser is on a distinguished road
Default Re: Best value & quality Lab Modules

Wow, thank for the feedback. I will definitely look into making my own as you suggested Bubonic... Choaslord, thanks for your reply as well. Wavelength isn't really as much of an issue as long as it's max is centered somewhere around 447, so anything from 445-450 would work fine for our application. My advisor was interested in Jetlasers as well so I will contact them and see if they stock the single-mode diodes. thank again for your feedback. Another quick question if you have any advice. Have either of you worked with CNI modules and power supplies and do you know if there is a "safe" way to turn up the current potential on a 20 mW diode to maybe squeeze 10 more milliwatts out of it?http://laserpointerforums.com/images...es/biggrin.gif
civiclaser is offline   Reply With Quote
Old 05-16-2014, 09:53 PM #4
ChaosLord's Avatar
Class 2M Laser
 
Join Date: Feb 2013
Location: Louisville, KY
Posts: 763
Rep Power: 212
ChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond repute
ChaosLord ChaosLord is offline
Class 2M Laser
ChaosLord's Avatar
 
Join Date: Feb 2013
Location: Louisville, KY
Posts: 763
Rep Power: 212
ChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond reputeChaosLord has a reputation beyond repute
Default Re: Best value & quality Lab Modules

I personally don't have experience with CNI, although many here have.

However, in general, if the driver on any laser is not adjustable, then power can't be increased. Well, maybe via optics, but I would think CNI would have about the best optics configuration already.

Although if the driver were adjustable, it would be risky to increase the current. This is commonly refered to as "pot modding" and usually results in a dead laser. That being said, if it is a direct diode laser, you could try to get the data sheet and see if the diode can handle more current. If so, you might be able to eek out a few more milliWatts.

I have built a laser with the pl450 that bubonic linked to. It does have one of the best beam profiles of any that I have. If I recall correctly, it is rated for 80mW output, of course we overdrive our diodes...
With this diode you could run it at spec for ~80mW, or drive it harder for 200+mW. Of course overdriving will shorten diode life and tends to shift the wavelength, but that's the price for extra power..
__________________
405nm SkyLaser PL 300-500 - ~500mW (523mW);| SkyLaser LP 5-80 - 5mW
405nm SkyRay 12X S06J w/450mA microboost - 485mW :|: BDR-209 16X w/700mA microboost 2X in ZeroLasers SkyRay and Chunk hosts
445nm ZeroLaser 2x18650 host 9mm w/2.3A X-drive - 2.8W :|: Trustfire A8 9mm w/2.4A X-drive - "The Sentinel" ~3W
445nm JetLasers PL-E - ~1.25W (1.32W) :|: 445nm 9mm w/2.4A X-drive Kryton "the Terminator" :|: Blord 501B build - 2.1W
450nm Osram PLTB450 in SL S4 host - 1.48W :|: 450nm Osram PL450B with ~280mA microboost in C6 host - 235mWBuild here
462nm 9mm diode in ZeroLasers chunk w/1.8A X-drive :|: M462 in sinner Cypreus-II w/microboost
473nm CNI lab 40mW
520nm NDG700 @1.8A in Cypreus-IIb - 1.04W :|: PL520 w/300mA x-boost in S4 host - 102mW Build here
532nm JetLasers Ti-B - 100mW (151mW)
589nm Dragonlasers Spartan 50mW
638nm Mits in SL C6 host custom build - 677mW :|: Opnext single mode 290mA x-drive in SL Steel C6 host w/ext. copper HS - 230mW
650nm copper module in C6 host - ~300mW (230mW) Build here
650nm module in custom host - ~300mW (224mW) "LiL Red Eye" Build Here

Radiant X4 3.7W LPM
Nospin 5W LPM

Last edited by ChaosLord; 05-16-2014 at 09:55 PM.
ChaosLord is offline   Reply With Quote
Old 05-28-2014, 11:53 PM #5
hakzaw1's Avatar
Class 4 Laser
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,333
Rep Power: 24213
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
hakzaw1 hakzaw1 is online now
Class 4 Laser
hakzaw1's Avatar
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,333
Rep Power: 24213
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
Default Re: Best value & quality Lab Modules

PM coming with another option

hak
__________________
IF YOU ARE NEW HERE- READ ALL THIS http://laserpointerforums.com/f37/an...ml#post1353314
& Spend some hours reading at LASERPOINTERSAFETY.COM

powered by PANGOLIN-ILDA Member since 2014.

QS/FB3 +Beyond-APC40-Mamba Black(clone) 5paghettix2 and I-show x2-Kasio synth-midi
KGB- 532 1.1W 445 2.2W 655 1.3W DT Pro 40 still needs more red.
KGB1W+ 532 DT Pro 40 soon to be GB.
Laserking 1300RGB FULL COLOR 30K(may be FS)
Laserking RGB LK PD2 500 and LK SD 850
REKE RGB 500- G 300
HeNes-(12)R(3)G-COH-594/5 mW-thnx DrSam
MULTILINE-147mW[
445nm 180mW-Mini spiro-Yob.
LPMs-RadiantAlpha& Pro5W-AixiZ SPER/KenmeterLite/LB1
Spacelas 1178mW 655nm/AixiZ 300mW532&
2 B&W 473nm 5/6mW lab
JETLRS1.3W&1.2W-MGL-H
638 180mW ttl mimi lab (av. 230mW)
405 100mW ttl mini lab
445 300 mW ttl mni lab ^AixiZ^ all for a lumia PJ
*MightyMite 2000* RGB all diode 2.2W 30K- 637/520./450...NEW!!
Guide DIY Pjs by Dan-
http://nqlasers.com/scannerreference/index.php?title=Main_Page
hakzaw1 is online now   Reply With Quote
Old 05-29-2014, 10:25 PM #6
Junior Member
 
Join Date: May 2014
Posts: 3
Rep Power: 0
civiclaser is on a distinguished road
civiclaser civiclaser is offline
Junior Member
 
Join Date: May 2014
Posts: 3
Rep Power: 0
civiclaser is on a distinguished road
Default Re: Best value & quality Lab Modules

So I had an idea to try to repair our current 447 nm CNI laser. I purchased a three element glass lens just to see if I would be able to change the mode structure and come up with a better beam. Would I need to replace the lens that is in the current module in order to get this to work? I tried placing the lens just after the laser head and it diverges to give me a huge spot on the wall (obviously I am doing something wrong). My advisor gave me the go ahead to purchase the $77 module and heatsink so I may just go that route. Thanks for all the help guys!
civiclaser is offline   Reply With Quote
Old 05-30-2014, 12:16 AM #7
hakzaw1's Avatar
Class 4 Laser
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,333
Rep Power: 24213
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
hakzaw1 hakzaw1 is online now
Class 4 Laser
hakzaw1's Avatar
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,333
Rep Power: 24213
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
Default Re: Best value & quality Lab Modules

super--let us know how
this all turns out
__________________
IF YOU ARE NEW HERE- READ ALL THIS http://laserpointerforums.com/f37/an...ml#post1353314
& Spend some hours reading at LASERPOINTERSAFETY.COM

powered by PANGOLIN-ILDA Member since 2014.

QS/FB3 +Beyond-APC40-Mamba Black(clone) 5paghettix2 and I-show x2-Kasio synth-midi
KGB- 532 1.1W 445 2.2W 655 1.3W DT Pro 40 still needs more red.
KGB1W+ 532 DT Pro 40 soon to be GB.
Laserking 1300RGB FULL COLOR 30K(may be FS)
Laserking RGB LK PD2 500 and LK SD 850
REKE RGB 500- G 300
HeNes-(12)R(3)G-COH-594/5 mW-thnx DrSam
MULTILINE-147mW[
445nm 180mW-Mini spiro-Yob.
LPMs-RadiantAlpha& Pro5W-AixiZ SPER/KenmeterLite/LB1
Spacelas 1178mW 655nm/AixiZ 300mW532&
2 B&W 473nm 5/6mW lab
JETLRS1.3W&1.2W-MGL-H
638 180mW ttl mimi lab (av. 230mW)
405 100mW ttl mini lab
445 300 mW ttl mni lab ^AixiZ^ all for a lumia PJ
*MightyMite 2000* RGB all diode 2.2W 30K- 637/520./450...NEW!!
Guide DIY Pjs by Dan-
http://nqlasers.com/scannerreference/index.php?title=Main_Page
hakzaw1 is online now   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On











Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 08:07 AM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC