Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

465nm/470nm 6W peak (lots of build pics)

Pman

0
Joined
Nov 28, 2012
Messages
4,447
Points
113
So, I had $ sitting with DTR for quite a long time watching and waiting to see what I might spend it on as he had said a while back that he had many diodes to test that might be up to snuff to release for sale. This has been out for a bit now although I would certainly call it new still. Really wasn't too interested to be honest in the 7W capable diode as I have so many units my desire was a different wavelength.
I already own 2 of the 462nm (although I rather call it a 464nm) at 2.2W one being in a custom host and another in a 510 adapter. Looking at the 464nm side by side with any other blue I had made all those other look very purple in comparison and I was concerned that the 465nm wouldn't be different enough.
After many others psted about how easy it was to get a wavelength shift by pushing it I finally decided to go with the whole shebang that Jordan offered which was the complete module in copper with the external SXD and G-2 set to at least 4.5A which should get me close to 470nm which should also give me a visible discernible wavelength change to make the purchase worth my while. I bought it with the G-2 so I could have another one on hand even though I have many other glass lenses as it is more cost effective to buy it with the complete module. I prefer 3-element lenses on most all of my units although I'm interested in trying out the G-7 from Podo if I remember correctly.
Upon arriving I noticed first and foremost how much I love the all copper module. Before this point I hadn't purchased anything that had it. This is a serious great upgrade over the common ones and this diode really needs the extra cooling in my opinion.
I had had Ehg make me up some custom heat-sinks at least a couple months ago for some larger units including a Dorcy side button and both a mag D and C (2) cell at a fantastic price. Work was done quickly and to my specs and am very pleased. He had preciously also made me up some focus knobs of various shapes/sizes so I have a bunch to choose from for that finishing touch.
Anyways, here is the build from yesterday and there's a lot of pics to share. I have only taken a couple beam shots so far but I figured I would get this up.

Here we have the heat-sink with the module already pushed in place and the driver just dangling. I really like that DTR used a thicker gauge wire than on the much lower output modules he sells so I didn't have to change them:
IA9VQS.jpg


8bdHpX.jpg


You can see the 8 and 5 chip that need to be heat-sinked above 3.5W although I would recommend they always be sinked:
NVU6wJ.jpg


Sinked using Arctic Silver onto the diode sink opposite the diode. I would mention that I held the driver down for over an hour with my fingers as I watched a part of a movie. It wasn't that easy to keep strong pressure for that long but it did turn out exactly as I wanted it too:
9Kq0rf.jpg


t4Ox7v.jpg


Just showing that when I am building I always put a cheapo plastic lens in to keep any debris away from the diode:
Tjrxyz.jpg


Here's the pill I had to work with:
vEaEsj.jpg


Already removed the LED and started to dremel though it:
nrRwzM.jpg


I needed a way to solder the negative so I took a copper ring and used my dremel to make it small to fit inside but also very tight:
8fBRXK.jpg


Here it is inserted after adding solder all the way around it so I could choose anywhere I wanted to attach the negative:
nIJviC.jpg


Inside of flashlight showing the pills contact point for switch:
Z9gvUr.jpg


In place:
10WHoZ.jpg


CZhEr3.jpg


Here's the head and complete sink in place but without the top ring to hold the sink from moving:
TPkNln.jpg


Soldered everything and left enough wire so I could screw the head on and easily see that I wasn't twisting the wires as I spun the sink at the same time. It's important to get the soldering iron hot enough to easily make a good connection to the copper as it needs to be hotter than normal as the pill acts like a sink pulling the heat away from the copper ring
Qwy812.jpg


The tail cap with spring that I didn't have to modify. Yes I could have used a longer spring instead of the spacer that I made for proper battery length but I had already made the spacer months ago specifically for this purpose and it gives the perfect length to the OEM spring:
X5xZHd.jpg


This flashlight was purchased maybe 4 years ago from Sears and came with a rechargeable 4.8V 700mAh Ni-Cd battery system with a ring that you could spin down to reveal the charging port as it also came with a wall wart. At the time I purchased an extra battery. The light cost $50 but I don't remember how much the extra battery was. I believe it was rated for 150 or 200 Lumens and before I decided to use it as a laser host it worked just fine:
ju4C34.jpg


Cuungv.jpg


bJm9qJ.jpg


Batteries are (2) 18490 cells with a small spacer I made to fit exactly as the Ni-Cd length would:
IRwA4L.jpg


4EseBp.jpg


This is the unit with the GITD O-Rings before I did any labeling. I have never seen anyone else use this host:
OoxPyD.jpg


JJrDEe.jpg


Here's the size although I do have small hands. It is as long as a (2) D cell mag and the head is just as wide:
1kLY72.jpg


wbeihS.jpg


Tx6SGn.jpg


Turning on this close my camera pleads for mercy:
XVWFg9.jpg


With batteries the weight is basically 1 pound:
ciKUas.jpg


Finished product:

27f2Pf.jpg


fWC34p.jpg


RT6vVm.jpg


CI1VK9.jpg


A pic using side button for on/off (not a momentary switch) in comparison to a 464nm:
VII6xH.jpg


Night and day difference in wavelength. See how it makes the 464nm look purple. It is this large of a difference in person;) When I had tested the module out before doing anything with it my Fluke 381 showed 4.8A to diode. I also have apparently received quite the diode as it will peak just over 6W upon 74F room temp start:D

Just realized that I have been here 3 years now. Happy Birthday to me I guess.

I have't done a side by side with my 1.5W 520nm but the relative brightness calculator says that the 520 should be about 23% brighter for beam and twice as bright for spot.
 
Last edited:





gozert

0
Joined
Nov 18, 2014
Messages
1,076
Points
63
Nice build Pete! +Rep for you. Congrats on the 3 year versary. That's quite some time. You chose a really nice host for this build, haven't seen it around anywhere else yet.
 
Joined
Aug 16, 2013
Messages
971
Points
43
Great build. Many steps to building a laser like this. Did you say how long it took you to complete the whole thing?

And we've all sat there holding components while the arctic silver sets. Luckily it's no toooo bad!
 

Pman

0
Joined
Nov 28, 2012
Messages
4,447
Points
113
Thanks guys and it took about 4-5 hours when you include letting the arctic silver set as I added more around the edges where there weren't any components on the driver to really make it hold strong plus doing all the labels.
 
Last edited:
Joined
Jul 4, 2012
Messages
2,834
Points
63
Diggin it! I really like the yellow accents you added to the host- gives it a nice unique touch.
 
Joined
Jul 10, 2015
Messages
9,799
Points
113
Nice build, I like the heavy heat sink, these diodes do make a lot of heat. :gj:
 

Pman

0
Joined
Nov 28, 2012
Messages
4,447
Points
113
Yeah, yellow on black is very striking.
Absolutely. These diodes build heat quick.
No animals were harmed in the making of this build;)
 
Last edited:

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Great build Pete! :beer:
I really like that host; you ought to get some decent run times with it.

:gj: +rep
 
Last edited:

sinner

0
Joined
Oct 27, 2011
Messages
2,565
Points
83
Very nice and unique, thank you for sharing the build pics.
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Great build. Glad it all came together so nicely.:beer:
 

Gabe

0
Joined
Jan 10, 2015
Messages
1,147
Points
83
Very nice. I can't remember, is the diode expected to have a shorter lifetime with being run at such a sketchy current that's so close to dropoff?
 

Pman

0
Joined
Nov 28, 2012
Messages
4,447
Points
113
Thanks guys.
By the way, I thought Jordan had set the driver wrong when it arrived but I've been sicker than normal and my eyes weren't focusing well and I didn't have my glasses on. I immediately PM'd him and he responded before I got to tell him that I rechecked and it was my fault and I apologized for my error. All good. I was embarrassed although all I sent was "Is there some reason why you didn't set the driver for 4.5A? It is set for 3.5A."
I would never allow myself to blame someone else for any error on my part. I would rather admit wrong and be embarrassed than live with the internal guilt.
As far as your question goes Gabe I would just assume that running any diode outside of the manufacturers test data conditions for lifetime isn't "good" for it unless you can go above and beyond their specs.
Yeah, I know that is kind of the obvious answer but I just look at what we are doing with all diodes as risk and most builds are not in a controlled environment so they blow a lot. Every single time I turn any of my units on I wonder if they are going to blow so I just have gotten myself in a place where I assume they will fail at any time so it doesn't bother me so much if it happens regardless of cost. I have too many units to let that be a real concern otherwise I wouldn't sleep at night.
I HIGHLY recommend this diode as it is seriously different than the 462/4nm when you give it some gas. It really is like the pics show in comparison. Don't know if you would see a visible difference between them if you don't push the 465nm. Both of my 462/4nm look exactly the same in wavelength at 2.2W. If you are on the fence between a 7W 445 or this one I think it's a no brainer to go with this one or at least get this one first and then the other as most would already own a 445nm. I haven't measured it with a 3-element but if we took 30% off the brightness and it was running at 4.2W that is still as bright as a 7W 445nm and the dot is brighter by 23%. Yes the 445nm should burn better but I personally don't care much about that.
When I first joined it was about seeing the amazing inexpensive 532nm beam and I still love that a $5 pen or module is an amazing site, a 405nm pen made focus-able can fluoresce and easily light matches, pop ballons and a 650nm pen which are almost all over 100mW can also light matches and pop balloons.
The point is not to lose the wonder/magic regardless of how many, output or wavelengths you own;) It's why I have stayed away from a lot of the really technical aspects of the hobby. For me it would ruin some of the fun.
 
Last edited:

Davidx

2
Joined
Dec 1, 2014
Messages
326
Points
28
Great job. It looks beautiful. Really like the GITD O rings. Very unique host
 

GSS

0
Joined
Apr 28, 2015
Messages
5,053
Points
113
Great work and you have a way with colors yes yellow and black sure does look good:).....I came back to look at the build pic(mabey some day) but is that your Pman symbol on the tail cap!? Nice touch
 
Last edited:

Pman

0
Joined
Nov 28, 2012
Messages
4,447
Points
113
Thanks guys.
I see Sinner posted and I would like to say that if anyone is looking for a beautiful heavy quality host please look into his cypress or its called something like that. Get the all copper with heavy chrome. It is beautiful and the whole host turns into a heat-sink. Trust me, you will NOT be disappointed. I just commented on a recent build using one as the basis for a high powered build with a beam expander. Think it was using the hot newish 445nm diode. If you haven't seen that build yet please take a look.
 




Top