Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

445nm in a Jayrob Key Chain Host

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
While I was building over the weekend, I built a little something for me. I had a Jayrob Key Chain host here.

http://laserpointerforums.com/f64/fs-key-chain-cr2-build-kit-schweet-42773.html

Also, I wanted a lower output 445nm laser. With the Jayrob Key chain host taking only a single CR2 battery, this seemed like just the ticket.

I set the driver at only 275mA. It is putting out 50mW with the stock AixiZ acrylic lens. I'm not too worried about the survival of the lens at 50mW ;)

Without further ado, here's the pics
IMG_1052.jpg


IMG_1047.jpg



There is some smoke in the air here
IMG_1048.jpg



At 50mW (after lens) there are still multiple lines in the raw output. I'm going to try making an actual lecture pointer at even lower current. We'll see if it will go down to a single line at lower current
IMG_1051.jpg


This was a fun one.

Peace,
dave
 





Asherz

0
Joined
Jan 18, 2009
Messages
1,623
Points
0
Very cool build :)

What's the lasing threshold for the diode? Would make a very cool lecture pointer!
 
Joined
Aug 6, 2009
Messages
476
Points
0
You should throw on an ez focus adapter for some ez focusing at your lecture, NIce build as always Dave.
-Sarge
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Very cool build :)

What's the lasing threshold for the diode? Would make a very cool lecture pointer!

The lth is ~200mA


You should throw on an ez focus adapter for some ez focusing at your lecture, NIce build as always Dave.
-Sarge

For a lecture pointer, I use a fixed focus ("infinity") and a momentary switch on the side. This one has a "clicky" in the tail

I have to wait for some more flexdrives to arrive to build the lecture pointer :(

Peace,
dave
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Very nice.

I have been wanting to do one in a 10280 keychain but I settled for a 10440 SS host that is on the way that I plan to set around 500mA.

Maby you could try the 10280 keychain for your lecture pointer? It has a momentary switch.
 
Last edited:
Joined
May 4, 2009
Messages
2,233
Points
83
^ Or put it in a Leadlight host, i'll bet it will look incredible with ~50mW of 445nm coming out of it
 




Top