Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

445nm diode just question

D

diodelaser

0
Joined
Jul 28, 2010
Messages
89
Points
0
i just have some question about the 445nm i know i could use the Rkcstr Micro-Drive Laser Diode Driver an only would give me like 300mW an for that driver what would be the recommended battery. or those any body else know where i could buy a good driver that would give the 1000mW power, an what battery would I be using. well thanks in advance.
 
Last edited:





cd520

cd520

0
Joined
Aug 2, 2010
Messages
272
Points
0
Do not use the acrylic lense at that power it will degrade. Use a glass lense. Yes you need a heatsink. Are you going to make this a flashlight host or lab style laser?
 
D

diodelaser

0
Joined
Jul 28, 2010
Messages
89
Points
0
cd520 said:
Do not use the acrylic lense at that power it will degrade. Use a glass lense. Yes you need a heatsink. Are you going to make this a flashlight host or lab style laser?
Click to expand...
Ok thank you for your answer an im not to sure what style, but i would say lab style. so you said just one battery (18650)
 
Last edited:
oic0

oic0

0
Joined
Jun 15, 2010
Messages
289
Points
0
Probably the best portable driver available for it right now is the Flexdrive V5. Its good for 750-1000mw out of the box, up to 1500+ if you can keep it cool cranked that high. If you are making a lab build though, you don't have to use such a compact driver, you have a lot more options.
:lasergun:
Acrylic lens will melt and the fumes will cloud up your diode window pretty much making your diode irreversibly suck. 405 / 445 glass is $10 shipped, no reason at all to ever use acrylic.
 
D

diodelaser

0
Joined
Jul 28, 2010
Messages
89
Points
0
D

diodelaser

0
Joined
Jul 28, 2010
Messages
89
Points
0
oic0 said:
Probably the best portable driver available for it right now is the Flexdrive V5. Its good for 750-1000mw out of the box, up to 1500+ if you can keep it cool cranked that high. If you are making a lab build though, you don't have to use such a compact driver, you have a lot more options.
:lasergun:
Acrylic lens will melt and the fumes will cloud up your diode window pretty much making your diode irreversibly suck. 405 / 445 glass is $10 shipped, no reason at all to ever use acrylic.
Click to expand...
well thank you so much..... how about the red laser 20X LPC will i need a glass lens for it too.
 
Ash

Ash

0
Joined
Mar 3, 2009
Messages
1,981
Points
0
diodelaser said:
well thank you so much..... how about the red laser 20X LPC will i need a glass lens for it too.
Click to expand...
You will want to use a glass lens for any laser that is over ~500mW.
For the 20x red, you will only be able to get it to about 250mW-300mW IIRC. So, you don't need a glass lens for it, but you will get slightly more power if you do use glass. :p
 
Benm

Benm

0
Joined
Aug 16, 2007
Messages
7,896
Points
113
Well, the glass lens gives a better beam profile for the red diodes, and might be worth it just for that. There is a bit of gain in power too, but its not that huge.

When you're building a lab style, just take a good driver, omamp based designs instead of things that are built to be compact and sacrifice performance for that.

Also, where the 445 diodes are concerned: most people want to run those in the order of 1 amp. If your driver needs to drop even one volt of current overall, its gonna dissipate one watt, and it will need a bit of cooling. If you are powering one from 2 lithium cells, the dissipation would likely be 2 watts or a bit more, and cooling the driver becomes a concern.

Its not a good idea to package all of that into an aixiz module or similarly small space: The laser diode and driver will produce 7 watts of heat combined, and you must consider heatsinking requirements for that before even beginning to build something.
 
D

diodelaser

0
Joined
Jul 28, 2010
Messages
89
Points
0
Ash said:
You will want to use a glass lens for any laser that is over ~500mW.
For the 20x red, you will only be able to get it to about 250mW-300mW IIRC. So, you don't need a glass lens for it, but you will get slightly more power if you do use glass. :p
Click to expand...
well thanks a lot ill keep that in mind, about using a glass lens, only if the power is above 500mW.
 
D

diodelaser

0
Joined
Jul 28, 2010
Messages
89
Points
0
Benm said:
Well, the glass lens gives a better beam profile for the red diodes, and might be worth it just for that. There is a bit of gain in power too, but its not that huge.

When you're building a lab style, just take a good driver, omamp based designs instead of things that are built to be compact and sacrifice performance for that.

Also, where the 445 diodes are concerned: most people want to run those in the order of 1 amp. If your driver needs to drop even one volt of current overall, its gonna dissipate one watt, and it will need a bit of cooling. If you are powering one from 2 lithium cells, the dissipation would likely be 2 watts or a bit more, and cooling the driver becomes a concern.

Its not a good idea to package all of that into an aixiz module or similarly small space: The laser diode and driver will produce 7 watts of heat combined, and you must consider heatsinking requirements for that before even beginning to build something.
Click to expand...
Well thank you so much Benm.
 
You must log in or register to reply here.




Top