2.9W saik..

I know it's old but I finally have a driver that will work for this 9mm 445.. and this is one of the bigest mix mached lasers I have ever built and alot of people have had a part in it.. it started with a Mohgasm saik sa-305 heatsink (which left me alot of room on the back) to fill it up with drivers or tec or whatever.. I tried to get some benboosts parallelled which didnt work for me so then I baught a FMT which worked but I couldnt change the current setting so I was stuck with 2.3W with that... I baught some V3 blitzbucks which were faulty so then I tried building a DIY 17mm buck/boost and that failed sent stuff back and away to be fixed and I got it all back prety much teh same day!!! I have been playing and testing and testing and testing.. lol But anyway's The Blitzbuck got me to close this laser up and call it finnished... OK on with the pics..


It is a DTR 9mm 445 with own lens in custom barrel and a anthot focus ring Mohgasm heatsink Blitzbuck ????ma... 2.9W Saik SA-305 3 x AR-14500 serial build..

ok the guts and the Glory!!!


IMG_4520 by Kizdawg, on Flickr


IMG_4525 by Kizdawg, on Flickr


IMG_4526 by Kizdawg, on Flickr
Sorry Antot kinda bitched this up...

IMG_4531 by Kizdawg, on Flickr

IMG_4535 by Kizdawg, on Flickr the 800mAh batteries I had were not button top and didnt work in the case so I just opted to combine what I had for testing.. Hope I dont wreck them...


IMG_4568 by Kizdawg, on Flickr


IMG_4574 by Kizdawg, on Flickr

OK OK on to the good stuff!!!!!! :evil:


IMG_4540 by Kizdawg, on Flickr


IMG_4541 by Kizdawg, on Flickr


IMG_4542 by Kizdawg, on Flickr


IMG_4547 by Kizdawg, on Flickr


IMG_4555 by Kizdawg, on Flickr

You finally managed made a 9mm 445nm laser. The output is very good. 2.9Watt is super. Keep the good work up ! :gj:

Would have been nice to see the finished product?..

2.9W:drool: your neighbors are going to fear you. Good Job wish I could get up that high. Lucky to have what I do for now. Thumbs up for this build. Keep them coming.:worthy:

Thanks... Added a couple more shots So you can see the finnished product. Thx Ped...

Shes a keeper for sure.

Well done.

Very nice :beer: 2.9W is amazing from a single diode & very powerful for a handheld

Nice build man ! This host is huge ! always wanted one...

This is insane ! What will come next ? 4W ?

I sure hope so!! LOL I wonder how Luke is doing with his combined 9mm445 build.. should see at leist 5W out of that one!!!

Anthot can I get a replacement for that It seems broken.. :tinfoil:

Kizdawg said:

I sure hope so!! LOL I wonder how Luke is doing with his combined 9mm445 build.. should see at leist 5W out of that one!!!

Anthot can I get a replacement for that It seems broken.. :tinfoil:

Click to expand...

what do you need replaced?

While on Vacation... Camp Fire by 2.9W!


IMG_4642 by Kizdawg, on Flickr


IMG_4653 by Kizdawg, on Flickr


I also thaught I killed it after the second day out. But it ended up being the batteries. Not a really great run time on 3x14500's.

Drive current?

2.8A ish.

Kizdawg it's amazing. So do you need to wire the diode any differently? I might get this diode this month and I'm a bit nervous to wire it all up wrong and I don't know what driver to use

Thx It is a prety straight forward diode just 2 pins + & -. Then there is also removing the lens cleaning it and puting it in a barrel for a lens about the same or a little better output as a G2.


9mm445 pinut by Kizdawg, on Flickr