Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Micro-Drive laser driver by rkcstr

RattleHead

RattleHead

0
Joined
Nov 20, 2007
Messages
218
Points
18
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

I'm having an output problem that I can't figure out.. I have the adjustable driver set at around 420ma (powered by 2 RCR2's). I put everything together and it worked fine, powering my open can to 242mW. And then later when I turn it on again I'm barely getting over 100mW (like 120mW peak, exactly half of what I was getting before). I've tried recharging the batteries, checked the connections, etc. Same thing.  Any ideas?
 





rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

RattleHead said:
Any ideas?
Click to expand...

Problem was resolved... wasn't a driver problem.



Also, parts are in, so production resumes! I still have a decent part of a rather large order to finish, which I'm hoping to complete tonight, then the other orders I have will be started. I currently don't have any large orders (all are <3 each), so I should be able to get all of them done by the weekend. Thanks again for your patience, I'm sure it'll be worth it!

Oh, and these dates aren't guaranteed, but I'll try my best... my girlfriend's birthday is Sat, so that may impact the timeframe since I'm still trying to find her birthday gift (damn Nintendo and their shitty ways not putting out Wii Fit in quantities to meet demand!!!) and we'll be going out to celebrate and what not.
 
icecruncher

icecruncher

0
Joined
Jan 2, 2008
Messages
1,513
Points
83
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

rkcstr said:
[quote author=RattleHead link=1206947255/312#320 date=1213736431] Any ideas?
Click to expand...
Also, parts are in, so production resumes!  I still have a decent part of a rather large order to finish, which I'm hoping to complete tonight, then the other orders I have will be started.  I currently don't have any large orders (all are <3 each), so I should be able to get all of them done by the weekend.  Thanks again for your patience, I'm sure it'll be worth it!

Oh, and these dates aren't guaranteed, but I'll try my best... my girlfriend's birthday is Sat, so that may impact the timeframe since I'm still trying to find her birthday gift (damn Nintendo and their shitty ways not putting out Wii Fit in quantities to meet demand!!!) and we'll be going out to celebrate and what not.[/quote]

Kind of figured it'd take a day or two longer.

Thanks and look forward to getting. .... again.
 
rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

icecruncher said:
Kind of figured it'd take a day or two longer.

Thanks and look forward to getting. .... again.
Click to expand...

Yup... even with having to order more parts, I should still have all orders out within a week of ordering (except styropyro, it'll be 8 days :-[). Anyway, I appreciate everyone's patience and understanding... these things don't just make themselves! ;D
 
rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

Update in post #2

I finished thru Cxrazy tonight... shipping tomorrow (6/19/08). Should finish thru phoenix77 tomorrow to ship for Friday. I'm ahead of schedule :D
 
S

smogthemog

0
Joined
Dec 29, 2007
Messages
112
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

Hi Ryan.

Is there a list anywhere of what resistor values should be fitted to give you a specific mA output rating for the non adjustable drivers please?
I want to give my BR a little more oomph that 38mA and wondered what I need to fit for say 90mA??

Thanks

Jim
 
daguin

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

smogthemog said:
Hi Ryan.

Is there a list anywhere of what resistor values should be fitted to give you a specific mA output rating for the non adjustable drivers please?
I want to give my BR a little more oomph that 38mA and wondered what I need to fit for say 90mA??

Thanks

Jim
Click to expand...


diode_blu_roundup.png


Peace,
dave
 
rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

smogthemog said:
Is there a list anywhere of what resistor values should be fitted to give you a specific mA output rating for the non adjustable drivers please?
Click to expand...


You can look at the instructions for standard output value settings.

Or you can check out the alternate value list for more settings.

Lastly, you can calculate your own value by using this equation:

Iout = Vref / Rset, where Iout is your output current, Vref is the reference voltage (1.25V) and Rset is your resistance setting.

You can also solve for Rset (switch Rset and Iout), to get the resistance you'd need for your desired output current.
 
daguin

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

Re: My Last Order,

I deleted my emails and receipts when I received the 4 drivers this week. However PayPal confirms that I ordered 4 "red high range" drivers. You sent me 4 "low range" drivers. :-/ I'm getting 40-140mA out of them at 7.5V using one of your dummy loads. My projects for this weekend have just ground to a halt. :'(

I'm beginning to wonder if the universe isn't trying to give me a message. drlava did the same thing to me last week. . . . .Naaaahhhhh! I have a diode that I must destroy! :D

These are the last of the older style so I don't know if you want them back or not. Whatever we decide about these, I need still need 4 "red high range" drivers. Let me know how you want to work it out.

Peace,
dave
 
rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

daguin said:
Re: My Last Order,

I deleted my emails and receipts when I received the 4 drivers this week.  However PayPal confirms that I ordered 4 "red high range" drivers.  You sent me 4 "low range" drivers.   :-/  I'm getting 40-140mA out of them at 7.5V using one of your dummy loads.  My projects for this weekend have just ground to a halt.   :'(

I'm beginning to wonder if the universe isn't trying to give me a message.  drlava did the same thing to me last week. . . . .Naaaahhhhh!  I have a diode that I must destroy!  :D

These are the last of the older style so I don't know if you want them back or not.  Whatever we decide about these, I need still need 4 "red high range" drivers.  Let me know how you want to work it out.

Peace,
dave
Click to expand...

Aw, crap!  Seriously??  I have no idea why I did that, as I had you down for 4x high range  :-[

Anyway, sorry about that! I'll send you out some correct drivers Monday and they'll be the newer version including the easier to adjust pot and what not... if you wouldn't mind, I'll include return postage/label if you could just stick the wrong ones back in the envelope and send em back?
 
daguin

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

rkcstr said:
Aw, crap! Seriously?? I have no idea why I did that, as I had you down for 4x high range :-[

Anyway, sorry about that! I'll send you out some correct drivers Monday and they'll be the newer version including the easier to adjust pot and what not... if you wouldn't mind, I'll include return postage/label if you could just stick the wrong ones back in the envelope and send em back?
Click to expand...

No Problem. Aaron may want to buy one of these, so if he does, I'll include the cash with the ones I send back. He may come by tonight or tomorrow.

Peace,
dave
 
rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

daguin said:
No Problem.  Aaron may want to buy one of these, so if he does, I'll include the cash with the ones I send back.  He may come by tonight or tomorrow.

Peace,
dave
Click to expand...

Sounds good
 
rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

Just wanted to let anyone know who's interested in purchasing some drivers, that in one week I'll be going out of town (June 29th thru July 5th). There may be little to no orders going out in that time. So, if you are looking to order soon and want them quickly, order before the middle of the week and I should have them out to by the end of the week.

I will however be attempting to make some extra drivers up ahead of time (if I don't have any current orders to complete) or I may look into taking my stuff with me to work while I'm away (I'm visiting my family).

I'll do my best to get orders out ASAP, but please do be aware that the week after this one, you may have to wait about a week or two to get them.
 
sk8er4514

sk8er4514

0
Joined
Feb 28, 2008
Messages
1,809
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

rkcstr said:
Just wanted to let anyone know who's interested in purchasing some drivers, that in one week I'll be going out of town (June 29th thru July 5th).  There may be little to no orders going out in that time.  So, if you are looking to order soon and want them quickly, order before the middle of the week and I should have them out to by the end of the week.

I will however be attempting to make some extra drivers up ahead of time (if I don't have any current orders to complete) or I may look into taking my stuff with me to work while I'm away (I'm visiting my family).

I'll do my best to get orders out ASAP, but please do be aware that the week after this one, you may have to wait about a week or two to get them.
Click to expand...

It's good to take a break sometimes, just put a notice on your order page that you're gone and will ship when you get back. works well for me, I only had 1 person cancel their order out of like 20 while I was in Hawaii, most people don't mind the wait as long as you tell them there will be a wait.
 
rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

sk8er4514 said:
It's good to take a break sometimes, just put a notice on your order page that you're gone and will ship when you get back. works well for me, I only had 1 person cancel their order out of like 20 while I was in Hawaii, most people don't mind the wait as long as you tell them there will be a wait.
Click to expand...

Yup, I'll be doing that... I usually do try to put a notice when there will be a delay, even if it is only a few days.
 
rkcstr

rkcstr

0
Joined
Dec 1, 2007
Messages
1,368
Points
0
Re: Micro-Driver laser driver *NOW ADJUSTABLE*

Update in Post #2,

biggest thing: new order page is http://rkcstr.googlepages.com/LPF

I made the "main" page a public purchase site where the prices are double the normal (well, with free shipping). So, make sure you visit the page above to order, unless you want to pay more!
 
You must log in or register to reply here.




Top