Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Laser Pro Shop



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 01-16-2015, 02:48 PM #145
Junior Member
 
Join Date: Jan 2015
Posts: 2
Rep Power: 0
Trebor is on a distinguished road
Trebor Trebor is offline
Junior Member
 
Join Date: Jan 2015
Posts: 2
Rep Power: 0
Trebor is on a distinguished road
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Hey JayRob,

I'm interested in your doing a "hot build" of everthing but the laser. I don't have the skills for the build, but I have a friend who can help me install the laser (but asking him to do the full build would be too much).

Questions:

Can you do the build in a Art Asylum TOS Phaser instead of the Playmate? The AA just is a better looking replica. (I would supply the toy or pay if you have a source)

Have you seen the new WAND Company Phaser replica/remote control and do you have any opinion on how suitable it would be for a build?

The Wand Company | Star Trek: The Original Series Phaser replica universal remote control

More info:

New Star Trek TOS Phaser coming November 2014

I want as "blue" a laser as possible to replicate the look of the original TV show effect. What diode do you recommend and where can I get that?

For the record, I'm not very concerned with power, as far as popping ballons, etc, as much as I am with beam appearance. If I need power to get a good looking beam, so be it, but power for the sake of power is not my thing.

Let me know what you think, if you would.


Trebor is offline   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 01-16-2015, 02:48 PM #146
Junior Member
 
Join Date: Jan 2015
Posts: 2
Rep Power: 0
Trebor is on a distinguished road
Trebor Trebor is offline
Junior Member
 
Join Date: Jan 2015
Posts: 2
Rep Power: 0
Trebor is on a distinguished road
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Hey JayRob,

I'm interested in your doing a "hot build" of everthing but the laser. I don't have the skills for the build, but I have a friend who can help me install the laser (but asking him to do the full build would be too much).

Questions:

Can you do the build in a Art Asylum TOS Phaser instead of the Playmate? The AA just is a better looking replica. (I would supply the toy or pay if you have a source)

Have you seen the new WAND Company Phaser replica/remote control and do you have any opinion on how suitable it would be for a build?

The Wand Company | Star Trek: The Original Series Phaser replica universal remote control

More info:

New Star Trek TOS Phaser coming November 2014

I want as "blue" a laser as possible to replicate the look of the original TV show effect. What diode do you recommend and where can I get that?

For the record, I'm not very concerned with power, as far as popping ballons, etc, as much as I am with beam appearance. If I need power to get a good looking beam, so be it, but power for the sake of power is not my thing.

Let me know what you think, if you would.
Trebor is offline   Reply With Quote
Old 01-16-2015, 07:24 PM #147
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is online now
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Quote:
Originally Posted by Trebor View Post
Hey JayRob,

I'm interested in your doing a "hot build" of everthing but the laser. I don't have the skills for the build, but I have a friend who can help me install the laser (but asking him to do the full build would be too much).

Questions:

Can you do the build in a Art Asylum TOS Phaser instead of the Playmate? The AA just is a better looking replica. (I would supply the toy or pay if you have a source)

Have you seen the new WAND Company Phaser replica/remote control and do you have any opinion on how suitable it would be for a build?

The Wand Company | Star Trek: The Original Series Phaser replica universal remote control

More info:

New Star Trek TOS Phaser coming November 2014

I want as "blue" a laser as possible to replicate the look of the original TV show effect. What diode do you recommend and where can I get that?

For the record, I'm not very concerned with power, as far as popping ballons, etc, as much as I am with beam appearance. If I need power to get a good looking beam, so be it, but power for the sake of power is not my thing.

Let me know what you think, if you would.
Hi,

I've tried the Art Asylum but did not like it because there is limited room for batteries. Also did not like the removable phaser on top because that is where the sound is, and it is only button cells.

I'm sure it can be done, as well as the Wand Company phaser you linked, but I'm really not interested in tackling that project.

It would be a tedious project...

Send me a PM if your still interested in a kit using the model I showed in the thread...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is online now   Reply With Quote
Old 01-19-2015, 02:01 PM #148
Junior Member
 
Join Date: Jan 2015
Posts: 1
Rep Power: 0
MinnieMouse is on a distinguished road
MinnieMouse MinnieMouse is offline
Junior Member
 
Join Date: Jan 2015
Posts: 1
Rep Power: 0
MinnieMouse is on a distinguished road
Smile Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Hi Jayrob,

I just saw your great enhancements to the star trek phaser.

Do you still have some of the phaser available (without the diode)?
If yes what will be the costs and how can I order it from you?
I own a Nichia NDB7875 445nm 9mm Copper Blue Laser module with driver andf 405-G-2 Diode (2400mA) and want to use it for this phaser.
Nichia NDB7875 445nm 9mm Copper 445nm Blue Laser Module w x Drive 405 G 2 | eBay

Could you send me a list and pricing of the parts you think I will need?
Thanks in advance and greetings here from a Trekki fan from Germany.

Minnie
MinnieMouse is offline   Reply With Quote
Old 01-19-2015, 04:17 PM #149
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is online now
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Quote:
Originally Posted by MinnieMouse View Post
Hi Jayrob,

I just saw your great enhancements to the star trek phaser.

Do you still have some of the phaser available (without the diode)?
If yes what will be the costs and how can I order it from you?
I own a Nichia NDB7875 445nm 9mm Copper Blue Laser module with driver andf 405-G-2 Diode (2400mA) and want to use it for this phaser.
Nichia NDB7875 445nm 9mm Copper 445nm Blue Laser Module w x Drive 405 G 2 | eBay

Could you send me a list and pricing of the parts you think I will need?
Thanks in advance and greetings here from a Trekki fan from Germany.

Minnie
Yes I still offer the 'Hot' option kit...

Couple things...

There is not room for a full length module where the module needs to be mounted.

So you need the diode in module. (but remove the back 'barrel' part of the module) I mount the driver in a separate location, and you just connect my driver leads to your diode.

The other thing is, I would recommend 1.5 Amps boost driver such as the V5 FlexDrive in this build.

And that's just because of the battery size limitations.

If you go 2.4 Amp X-Drive, that means batteries in series. No problem except you really have to watch your run time because it will probably draw around 2 Amps from the cells and it would be really easy to over discharge the cells.

I like 1.5 Amps in a boost driver running the batteries in parallel to double the capacity, but at a lower setting of 1.5 Amps makes it a more reliable set up.

However, I can set it up for your 2.4 Amp X-Drive if you want.

Send me a PM...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!


Last edited by jayrob; 01-21-2015 at 12:50 PM.
jayrob is online now   Reply With Quote
Old 03-09-2015, 03:50 PM #150
Class 1 Laser
 
Join Date: Feb 2015
Posts: 60
Rep Power: 0
bobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these parts
bobbypayne310 bobbypayne310 is offline
Class 1 Laser
 
Join Date: Feb 2015
Posts: 60
Rep Power: 0
bobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these partsbobbypayne310 is infamous around these parts
Default

Quote:
Originally Posted by jayrob View Post
This 'Hot' option Phaser Kit and/or parts, are specifically for my Star Trek Phaser mod... (445, green, blu-ray, or red)



Note: I do not sell complete lasers. My kits do not include diodes or modules. You must buy your own laser diode and/or green laser module to complete the assembly. ('Hot' option means 'driver installed and current set', safety switch, LED, heatsink, EzFocus adapter, and everything built - but no laser diode included)

I do offer a 'Hot' option build that is complete with safety switch, LED, FlexDrive installed...
Heatsink set and aligned, EzFocus adapter, and 405-G-1... (laser diode not included) See 'Hot' option below...


Send me a PM!






12X Blu-Ray Star Trek Phaser video! Click here!

And another...

12X Beam Video (with smoke) Igniting flash paper and popping more balloons! - Click here!


Proper eye protection needed: Just a warning. (In case you may be a beginner) Read up on proper eye protection...

AixiZ module: You will not use the back 'barrel' part of the AixiZ module. All that is needed with any decent heatsink, is the front 'business end' of the module.

For a 445 build, you can get your diode pre-installed into an AixiZ module with lead wires soldered on from daguin or DTR.

In that case, you will just connect your diode leads, to my driver leads... ('Hot' option kit)







1.5 Amp 445 build: (see pricing for the 1.5 Amp build below)

Shown in the July, 2011 issue of Popular Science Magazine...
Popular Science Phaser Article...












These parts are for the Playmates brand, 1994 Classic Star Trek Phaser... (stock #6118)






Copper heatsink option - $12 dollar upgrade...







12X Star Trek Phaser tutorial is here!


Using a FlexDrive for my 12X Blu-ray Star Trek Phaser build:
http://hacylon.case.edu/ebay/laser_d..._FlexDrive.php
















Green Star Trek Phaser tutorial is here!









Here are some custom parts that I will offer if you would like to follow my tutorial for this Star Trek Phaser modification...




About the cone tipped EzFocus adapter. Please realize that there is a lot of work involved in making this piece. That is why I am asking the price shown.

* Three different size drilling operations
* Then a reamer to size for lens thread tapping
* Tap the threads for the lens, lined up on the lathe for perfect alignment
* A lot of shaving down on both ends for the shaft and the cone
* Then the knurling... after the sizing of the knob and the skirt which fits the cap. (see pictures and tutorial link above)
* And finally, the angle cut for the cone, and putting a nice sanded finish on it

If you do this build, and get this EzFocus adapter, you will not be disappointed. It is perfect...





* Heatsink - $23 (or $12 dollars more for the copper heatsink) - Fit for either build. The set screw location is the only difference,
* 'Cone tipped' EzFocus adapter - $55

Add one of my custom glass lens mods!

* 405-G-1 glass lens mod - $55 (31% more power for blu-ray vs AixiZ acrylic)
* 650-G-1 glass lens mod - $52 (25% more power for red vs AixiZ acrylic)
* Shipping - Based on my PayPal fees and postage (send message for ordering)
* Please read my shipping policy here!








P.S. I have a few of the Phasers, and I would do a 'Hot' option kit, but would not include the diode. You would have to get your own diode to turn it into a laser...

Send me a PM if you are interested!









If you look at the tutorials, you will see that in both builds, there is a drilling operation for the nose...

* For the green, I drill a 9/64" hole straight through the stock cone.
* For the 12X, I drill the nose cap to fit my custom EzFocus adapter.

So if you would like, then you can send me your nose cap, and I can also do the drilling at no additional charge.

Also, in the 12X tutorial, I show a safety switch option. The switches I stock, are for my 'Hot' option kits, but if you plan on doing it the way I show it, you can also send me your sound knob, and I can drill it through, and fit it with a fiber optic plug as shown in my tutorial for an extra $5 bucks.

But you would get your own 3mm LED for it. First make sure you will have the proper type of switch for this set up...







12X Blu-Ray Star Trek Phaser video! - Click here! (for best view)












'Hot' Option Build:

Here is all the information... (save for future reference)

The most complete build I could do for you is to set up the phaser with everything except for the laser diode.

Important: For those who are new to lasers, this modification can damage the eye instantly with a direct shot or reflection. Proper eye protection for 405nm wave length is recommended. And extreme caution needed when using. I would recommend storing it in a lockable case so that it cannot be accessed by just any person or child...

Eye Protection: (405nm)
http://oemlasersystems.com/product-catalog/laser-eye-protection/uv-visible/arg-uv-blu-ray-argon-blue-ktp


So here's the deal...

Proper eye protection for 405nm is recommended.
Which is why I cannot sell it complete. (FDA) Only the non-laser parts.

I don't sell complete lasers because of FDA regulations.

So the most complete build I could do for you is to set up the phaser with everything except for the laser diode.

I could even have the driver mounted and current pre-set. I could have the heatsink installed and adjusted too. All you would have to do, is get a diode, and mount it into an AixiZ module, solder lead wires to your diode pins, slip it into my heatsink, tighten the set screw, and solder your lead wires to my driver lead wires.

I would call that a 'Hot' option kit. (driver installed) But it would still not be a cheap project.

Sorry, but the parts add up. I would want:

* Heatsink - $23 (add $12 for copper upgrade)

* EzFocus adapter - $55

* AixiZ module - $5

* 405-G-1 glass lens - $55

* Phaser - $50 (or send me your phaser 1994 Playmates brand, stock #6118)

* Parts - Driver, switch, LED, wire, etc... - $40 (driver alone is $26)

* Labor to do the modifications on the Phaser. And modify the trigger switch, wire and mount the safety switch and LED, fit the heatsink and install the driver. - $100

* Shipping - Based on my PayPal fees and shipping cost. (send private message)

Out of U.S. buyers will assume responsibility. But there should be no problem. I would mark the package as a gift, with a description of 'Star Trek Toy', and a low value of $15 dollars.

Anyway, as you can see, it is not cheap. The time involved is this modification, not counting the machine work for the heatsink and EzFocus adapter (which is the most technical part), is at a minimum of 3 or 4 hours...




Parts options:

The parts add up too. Especially if you want to build a 12X power like the one I show in my video with the safety switch and everything...

You can get a PHR diode for $15 dollars and have about 130mW's. (405-G-1 glass lens)
http://www.modwerx.com
http://www.hightechdealz.com


Your overall cost for a phaser build will depend on your choice of which laser diode to use:
* PHR diode - $12 (about 110mWs with AixiZ acrylic, or 140mWs with my 405-G-1 glass lens)
* GGW 6X diode - $60 (about 180mWs with AixiZ acrylic, or 226mWs with my 405-G-1 glass lens)
* 12X diode - $60 (470+mWs with my 405-G-1 glass lens)
* 445 diode - $50 (1.5 Amp 'Hot' option available - see below)

You need to use a glass lens for 12X power. An acrylic lens will degrade quickly.
Heres information about my 405-G-1 glass lens modification: (31% increase in power for blu-ray vs AixiZ acrylic)
[URL="http://laserpointerforums.com/f64/fs-405-g-1-glass-lens-mod-31-increase-vs-aixiz-22497.html"]http://laserpointerforums.com/f64/fs-405-g-1-glass-lens-mod-31-increase-vs-aixiz-22497.html

The 12X is what I showed in my video - 465mW's. (current is set at 320mA's)

For that, you would have to buy a Pioneer BDR-205 drive, and harvest the diode yourself.

12X diode harvest and pressing into AixiZ module video:





If you were to follow my tutorial, I have detailed pictures of the build and wiring here:
Tutorial: 12X Star Trek Phaser Mod!

There you will see exactly which phaser to buy, and there is a link to the driver. (FlexDrive)

The FlexDrive is very small, and requires an understanding of how it works. There are range settings that can be soldered. See the documentation here: (for a 12X build, you want the 4th range setting - 155 to 600)
http://hacylon.case.edu/ebay/laser_d..._V5_manual.pdf

The FlexDrive will get damaged if you power it with out a load. You also will need a proper test load to set the current. See this write up for how to set current using a test load: (he shows a DDL driver, but it is the same procedure with a FlexDrive)
It can be done - Laser driver

* If you decide you would like a 'Hot' option kit, which is everything except the diode, then I can make that for you.

* If you decide that you just need the heatsink, EzFocus adapter, and 405-G-1 glass lens, then I can make them for you. (405-G-1 needed for this power)

But I don't sell the switches and other parts unless I am building a 'Hot' option kit...



Keep this information for future reference!

One thing if you get the 'Hot' option kit from me...

I know that the FlexDrive and everything will be perfect. It will be tested and set at 320mA's. I have set over 500 FlexDrives.

I just want to mention this because it is an electronic component that can be damaged if misused, and I will not be responsible.

If you carefully read my instructions that will be included, I'm sure you will be fine. The worst thing you will do is maybe kill your diode. But the driver can be damaged if powered without a load. So watch out for that. I have put warnings in the instruction sheet that I will include...

Even if it is powered for a split second without a load and doesn't harm the driver, it could still be a really bad thing. Because the capacitor in the driver would charge, and then it will kill your diode as soon as you try to connect it.

I will make sure that the driver cap is discharged after I test it and set the current...


With the 'Hot' option kit, I would like to take my time with it, and get everything perfect. (like 2 or 3 days)
You would need to get your diode pressed into the AixiZ module, solder two 'fine' lead wires onto the diode pins, and complete the assembly...

Diodes are sensitive to ESD, and can also be damaged with too much heat during soldering. I would recommend practicing on a cheap diode such as a PHR for harvesting and soldering if you have not already done this kind of thing.

Cheap PHR diodes can be purchased at modwerx.com and hightechdealz.com (buy the complete 'sled')

Here is the diode pin connections:


Assembly of the Phaser:

The one area that you need to be careful about, is threading the lens in place. The lens will be installed into the end of my EzFocus adapter, which must be installed last. After the nose cap of the phaser is screwed on. So if you are not careful, you could cross thread the lens. But if you are careful, you will not have a problem.

I will have it aligned already with the heatsink. Because I will have the heatsink glued in place (on one side of the model, so that you obviously can take it apart to install your diode), and when I glue it in place with silicone glue, I will have it dry with the lens and EzFocus adapter already installed. This will automatically align the heatsink with the lens and EzFocus adapter. Also, it will align it with the phaser. The beam will then come out perfectly centered and aligned. As long as the diode is pressed in properly into your AixiZ module...

Here is a picture of the sled, and the location of the blu-ray diode: (Pioneer BDR-205 drive)







1.5 Amp 445 build:

I have done testing with running 2 X IMR 14500 Li-Ion's in parallel and it works great for a V5 FlexDrive set at 1.5 Amps...

It requires a few additional modifications:

* Re-wiring it for parallel
* Slight modification to the battery compartment
* Driver heatsink installed
* Installing voltage regulators for the sound board and the 3 volt LED 'armed' indicator LED. (7833 voltage regulators - 3.3 volts)
* Also, with this mod, the sound board is turned on with the safety switch, as well as the laser...

It is wired so that the voltage to the FlexDrive, is direct from the batteries. (4.2 volts at full charge)

* 2 X IMR 14500 in parallel = 1200mAh's capacity
* 2 X AW protected 14500's in parallel = 1500mAh's capacity

I've also got an extra LED inside. So that blue light is illuminated out of the top of the vent plate when you activate the trigger...






With a 'Hot' option kit, the heatsink for the module is installed, and glued in place. It has to be that way because I align it with the EzFocus adapter, and the nozzle of the phaser.

All you have to do, is slide your diode/AixiZ module into the heatsink and set it's position with the set screw. (you will need a 1.5mm Hex wrench)

Then just solder your diode leads, to my driver leads, and that's it...

The IMR 14500 Li-Ion batteries must be installed with both positive ends the same direction. I have permanent marker on the battery compartment to remind you of the battery install direction.

With this build, I include the IMR 14500's. Because I need them to do the fitting, and also for the testing...

Note: With a little extra work to modify the battery compartment, I can fit protected AW 14500's.

Do not install the batteries until you get your diode connected. Because the driver can get damaged if powered without a load.

The capacity will be approximately 1200mAh's (IMR 14500's - 1500mAh's for protected AW 14500's). So you must be careful not to over discharge the Li-Ion batteries. It will be around 30 to 40 minutes between charges. Check voltage once in a while. Do not let the batteries get below 3 volts.

Pricing:
* Heatsink - $23
* Copper heatsink upgrade - $12
* EzFocus adapter - $55
* AixiZ 445 lens - $11
* AixiZ module - $5 (I like to sell the module with the kit, because I install and align the heatsink using the module)
* Phaser - $50 (Playmates brand, stock #6118)
* Parts - Driver, switch, LED, 2 X 3 volt regulators, wire, etc... - $55
* V5 FlexDrive 'Hot' option set at 1500mA's with driver heatsink, custom wiring for 2 X Li-Ion's in parallel, 3 volt regulator for LED's and sound board - Labor to modify the trigger switch, wire and mount the safety switch and LED, fit the heatsink and install the driver. - $145
* 2 X IMR 14500 Li-Ion batteries - $20
* Shipping (U.S.A.) - $29 (based on PayPal fees plus Priority shipping with delivery confirmation)

Total - $405 dollars.


Reminder: With this build, the sound will not work until you arm the laser with the safety switch. Then the sound will work, along with the laser...

Are they still $405
bobbypayne310 is offline   Reply With Quote
Old 03-09-2015, 07:47 PM #151
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is online now
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Quote:
Originally Posted by bobbypayne310 View Post
Are they still $405
For what is in that list yes...

Send me a PM!
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is online now   Reply With Quote
Old 03-15-2015, 03:57 PM #152
Junior Member
 
Join Date: Mar 2015
Posts: 1
Rep Power: 0
Cowin2013 is on a distinguished road
Cowin2013 Cowin2013 is offline
Junior Member
 
Join Date: Mar 2015
Posts: 1
Rep Power: 0
Cowin2013 is on a distinguished road
Default

Quote:
Originally Posted by jayrob View Post
This 'Hot' option Phaser Kit and/or parts, are specifically for my Star Trek Phaser mod... (445, green, blu-ray, or red)



Note: I do not sell complete lasers. My kits do not include diodes or modules. You must buy your own laser diode and/or green laser module to complete the assembly. ('Hot' option means 'driver installed and current set', safety switch, LED, heatsink, EzFocus adapter, and everything built - but no laser diode included)

I do offer a 'Hot' option build that is complete with safety switch, LED, FlexDrive installed...
Heatsink set and aligned, EzFocus adapter, and 405-G-1... (laser diode not included) See 'Hot' option below...


Send me a PM!






12X Blu-Ray Star Trek Phaser video! Click here!

And another...

12X Beam Video (with smoke) Igniting flash paper and popping more balloons! - Click here!


Proper eye protection needed: Just a warning. (In case you may be a beginner) Read up on proper eye protection...

AixiZ module: You will not use the back 'barrel' part of the AixiZ module. All that is needed with any decent heatsink, is the front 'business end' of the module.

For a 445 build, you can get your diode pre-installed into an AixiZ module with lead wires soldered on from daguin or DTR.

In that case, you will just connect your diode leads, to my driver leads... ('Hot' option kit)







1.5 Amp 445 build: (see pricing for the 1.5 Amp build below)

Shown in the July, 2011 issue of Popular Science Magazine...
Popular Science Phaser Article...












These parts are for the Playmates brand, 1994 Classic Star Trek Phaser... (stock #6118)






Copper heatsink option - $12 dollar upgrade...







12X Star Trek Phaser tutorial is here!


Using a FlexDrive for my 12X Blu-ray Star Trek Phaser build:
http://hacylon.case.edu/ebay/laser_d..._FlexDrive.php
















Green Star Trek Phaser tutorial is here!









Here are some custom parts that I will offer if you would like to follow my tutorial for this Star Trek Phaser modification...




About the cone tipped EzFocus adapter. Please realize that there is a lot of work involved in making this piece. That is why I am asking the price shown.

* Three different size drilling operations
* Then a reamer to size for lens thread tapping
* Tap the threads for the lens, lined up on the lathe for perfect alignment
* A lot of shaving down on both ends for the shaft and the cone
* Then the knurling... after the sizing of the knob and the skirt which fits the cap. (see pictures and tutorial link above)
* And finally, the angle cut for the cone, and putting a nice sanded finish on it

If you do this build, and get this EzFocus adapter, you will not be disappointed. It is perfect...





* Heatsink - $23 (or $12 dollars more for the copper heatsink) - Fit for either build. The set screw location is the only difference,
* 'Cone tipped' EzFocus adapter - $55

Add one of my custom glass lens mods!

* 405-G-1 glass lens mod - $55 (31% more power for blu-ray vs AixiZ acrylic)
* 650-G-1 glass lens mod - $52 (25% more power for red vs AixiZ acrylic)
* Shipping - Based on my PayPal fees and postage (send message for ordering)
* Please read my shipping policy here!








P.S. I have a few of the Phasers, and I would do a 'Hot' option kit, but would not include the diode. You would have to get your own diode to turn it into a laser...

Send me a PM if you are interested!









If you look at the tutorials, you will see that in both builds, there is a drilling operation for the nose...

* For the green, I drill a 9/64" hole straight through the stock cone.
* For the 12X, I drill the nose cap to fit my custom EzFocus adapter.

So if you would like, then you can send me your nose cap, and I can also do the drilling at no additional charge.

Also, in the 12X tutorial, I show a safety switch option. The switches I stock, are for my 'Hot' option kits, but if you plan on doing it the way I show it, you can also send me your sound knob, and I can drill it through, and fit it with a fiber optic plug as shown in my tutorial for an extra $5 bucks.

But you would get your own 3mm LED for it. First make sure you will have the proper type of switch for this set up...







12X Blu-Ray Star Trek Phaser video! - Click here! (for best view)












'Hot' Option Build:

Here is all the information... (save for future reference)

The most complete build I could do for you is to set up the phaser with everything except for the laser diode.

Important: For those who are new to lasers, this modification can damage the eye instantly with a direct shot or reflection. Proper eye protection for 405nm wave length is recommended. And extreme caution needed when using. I would recommend storing it in a lockable case so that it cannot be accessed by just any person or child...

Eye Protection: (405nm)
http://oemlasersystems.com/product-catalog/laser-eye-protection/uv-visible/arg-uv-blu-ray-argon-blue-ktp


So here's the deal...

Proper eye protection for 405nm is recommended.
Which is why I cannot sell it complete. (FDA) Only the non-laser parts.

I don't sell complete lasers because of FDA regulations.

So the most complete build I could do for you is to set up the phaser with everything except for the laser diode.

I could even have the driver mounted and current pre-set. I could have the heatsink installed and adjusted too. All you would have to do, is get a diode, and mount it into an AixiZ module, solder lead wires to your diode pins, slip it into my heatsink, tighten the set screw, and solder your lead wires to my driver lead wires.

I would call that a 'Hot' option kit. (driver installed) But it would still not be a cheap project.

Sorry, but the parts add up. I would want:

* Heatsink - $23 (add $12 for copper upgrade)

* EzFocus adapter - $55

* AixiZ module - $5

* 405-G-1 glass lens - $55

* Phaser - $50 (or send me your phaser 1994 Playmates brand, stock #6118)

* Parts - Driver, switch, LED, wire, etc... - $40 (driver alone is $26)

* Labor to do the modifications on the Phaser. And modify the trigger switch, wire and mount the safety switch and LED, fit the heatsink and install the driver. - $100

* Shipping - Based on my PayPal fees and shipping cost. (send private message)

Out of U.S. buyers will assume responsibility. But there should be no problem. I would mark the package as a gift, with a description of 'Star Trek Toy', and a low value of $15 dollars.

Anyway, as you can see, it is not cheap. The time involved is this modification, not counting the machine work for the heatsink and EzFocus adapter (which is the most technical part), is at a minimum of 3 or 4 hours...




Parts options:

The parts add up too. Especially if you want to build a 12X power like the one I show in my video with the safety switch and everything...

You can get a PHR diode for $15 dollars and have about 130mW's. (405-G-1 glass lens)
http://www.modwerx.com
http://www.hightechdealz.com


Your overall cost for a phaser build will depend on your choice of which laser diode to use:
* PHR diode - $12 (about 110mWs with AixiZ acrylic, or 140mWs with my 405-G-1 glass lens)
* GGW 6X diode - $60 (about 180mWs with AixiZ acrylic, or 226mWs with my 405-G-1 glass lens)
* 12X diode - $60 (470+mWs with my 405-G-1 glass lens)
* 445 diode - $50 (1.5 Amp 'Hot' option available - see below)

You need to use a glass lens for 12X power. An acrylic lens will degrade quickly.
Heres information about my 405-G-1 glass lens modification: (31% increase in power for blu-ray vs AixiZ acrylic)
[URL="http://laserpointerforums.com/f64/fs-405-g-1-glass-lens-mod-31-increase-vs-aixiz-22497.html"]http://laserpointerforums.com/f64/fs-405-g-1-glass-lens-mod-31-increase-vs-aixiz-22497.html

The 12X is what I showed in my video - 465mW's. (current is set at 320mA's)

For that, you would have to buy a Pioneer BDR-205 drive, and harvest the diode yourself.

12X diode harvest and pressing into AixiZ module video:





If you were to follow my tutorial, I have detailed pictures of the build and wiring here:
Tutorial: 12X Star Trek Phaser Mod!

There you will see exactly which phaser to buy, and there is a link to the driver. (FlexDrive)

The FlexDrive is very small, and requires an understanding of how it works. There are range settings that can be soldered. See the documentation here: (for a 12X build, you want the 4th range setting - 155 to 600)
http://hacylon.case.edu/ebay/laser_d..._V5_manual.pdf

The FlexDrive will get damaged if you power it with out a load. You also will need a proper test load to set the current. See this write up for how to set current using a test load: (he shows a DDL driver, but it is the same procedure with a FlexDrive)
It can be done - Laser driver

* If you decide you would like a 'Hot' option kit, which is everything except the diode, then I can make that for you.

* If you decide that you just need the heatsink, EzFocus adapter, and 405-G-1 glass lens, then I can make them for you. (405-G-1 needed for this power)

But I don't sell the switches and other parts unless I am building a 'Hot' option kit...



Keep this information for future reference!

One thing if you get the 'Hot' option kit from me...

I know that the FlexDrive and everything will be perfect. It will be tested and set at 320mA's. I have set over 500 FlexDrives.

I just want to mention this because it is an electronic component that can be damaged if misused, and I will not be responsible.

If you carefully read my instructions that will be included, I'm sure you will be fine. The worst thing you will do is maybe kill your diode. But the driver can be damaged if powered without a load. So watch out for that. I have put warnings in the instruction sheet that I will include...

Even if it is powered for a split second without a load and doesn't harm the driver, it could still be a really bad thing. Because the capacitor in the driver would charge, and then it will kill your diode as soon as you try to connect it.

I will make sure that the driver cap is discharged after I test it and set the current...


With the 'Hot' option kit, I would like to take my time with it, and get everything perfect. (like 2 or 3 days)
You would need to get your diode pressed into the AixiZ module, solder two 'fine' lead wires onto the diode pins, and complete the assembly...

Diodes are sensitive to ESD, and can also be damaged with too much heat during soldering. I would recommend practicing on a cheap diode such as a PHR for harvesting and soldering if you have not already done this kind of thing.

Cheap PHR diodes can be purchased at modwerx.com and hightechdealz.com (buy the complete 'sled')

Here is the diode pin connections:


Assembly of the Phaser:

The one area that you need to be careful about, is threading the lens in place. The lens will be installed into the end of my EzFocus adapter, which must be installed last. After the nose cap of the phaser is screwed on. So if you are not careful, you could cross thread the lens. But if you are careful, you will not have a problem.

I will have it aligned already with the heatsink. Because I will have the heatsink glued in place (on one side of the model, so that you obviously can take it apart to install your diode), and when I glue it in place with silicone glue, I will have it dry with the lens and EzFocus adapter already installed. This will automatically align the heatsink with the lens and EzFocus adapter. Also, it will align it with the phaser. The beam will then come out perfectly centered and aligned. As long as the diode is pressed in properly into your AixiZ module...

Here is a picture of the sled, and the location of the blu-ray diode: (Pioneer BDR-205 drive)







1.5 Amp 445 build:

I have done testing with running 2 X IMR 14500 Li-Ion's in parallel and it works great for a V5 FlexDrive set at 1.5 Amps...

It requires a few additional modifications:

* Re-wiring it for parallel
* Slight modification to the battery compartment
* Driver heatsink installed
* Installing voltage regulators for the sound board and the 3 volt LED 'armed' indicator LED. (7833 voltage regulators - 3.3 volts)
* Also, with this mod, the sound board is turned on with the safety switch, as well as the laser...

It is wired so that the voltage to the FlexDrive, is direct from the batteries. (4.2 volts at full charge)

* 2 X IMR 14500 in parallel = 1200mAh's capacity
* 2 X AW protected 14500's in parallel = 1500mAh's capacity

I've also got an extra LED inside. So that blue light is illuminated out of the top of the vent plate when you activate the trigger...






With a 'Hot' option kit, the heatsink for the module is installed, and glued in place. It has to be that way because I align it with the EzFocus adapter, and the nozzle of the phaser.

All you have to do, is slide your diode/AixiZ module into the heatsink and set it's position with the set screw. (you will need a 1.5mm Hex wrench)

Then just solder your diode leads, to my driver leads, and that's it...

The IMR 14500 Li-Ion batteries must be installed with both positive ends the same direction. I have permanent marker on the battery compartment to remind you of the battery install direction.

With this build, I include the IMR 14500's. Because I need them to do the fitting, and also for the testing...

Note: With a little extra work to modify the battery compartment, I can fit protected AW 14500's.

Do not install the batteries until you get your diode connected. Because the driver can get damaged if powered without a load.

The capacity will be approximately 1200mAh's (IMR 14500's - 1500mAh's for protected AW 14500's). So you must be careful not to over discharge the Li-Ion batteries. It will be around 30 to 40 minutes between charges. Check voltage once in a while. Do not let the batteries get below 3 volts.

Pricing:
* Heatsink - $23
* Copper heatsink upgrade - $12
* EzFocus adapter - $55
* AixiZ 445 lens - $11
* AixiZ module - $5 (I like to sell the module with the kit, because I install and align the heatsink using the module)
* Phaser - $50 (Playmates brand, stock #6118)
* Parts - Driver, switch, LED, 2 X 3 volt regulators, wire, etc... - $55
* V5 FlexDrive 'Hot' option set at 1500mA's with driver heatsink, custom wiring for 2 X Li-Ion's in parallel, 3 volt regulator for LED's and sound board - Labor to modify the trigger switch, wire and mount the safety switch and LED, fit the heatsink and install the driver. - $145
* 2 X IMR 14500 Li-Ion batteries - $20
* Shipping (U.S.A.) - $29 (based on PayPal fees plus Priority shipping with delivery confirmation)

Total - $405 dollars.


Reminder: With this build, the sound will not work until you arm the laser with the safety switch. Then the sound will work, along with the laser...
Hi Jayrob,
First off,
Thank you so much for your contribution! This is the coolest thing I've seen posted on the Internet yet!!! You are the bomb-diggity dude!!
I am extremely interested in getting one. However, I have never worked with lasers or electronics before. Therefore, I have plenty of questions.
1- Does the color of the laser have anything to do with the strength of the beam? I would like to have the most powerful blue beam if possible. Red is cool too.
2- Please explain what the "hot option" is in a way you would explain it to a 5 year old child. Is that an option I would want?
3- I am looking to purchase a phaser that is as assembled as possible. I understand that you do not sell completed phasers. I would like to purchase from you one that is a "plug and play" kind of thing as much as feasible so I can't screw anything up.
Once again, thank you for your innovation and contribution making this a must-have for any Star Trek enthusiast. Look forward to hearing from you!
Cowin2013 is offline   Reply With Quote
Old 03-16-2015, 02:26 AM #153
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is online now
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Quote:
Originally Posted by Cowin2013 View Post
Hi Jayrob,
First off,
Thank you so much for your contribution! This is the coolest thing I've seen posted on the Internet yet!!! You are the bomb-diggity dude!!
I am extremely interested in getting one. However, I have never worked with lasers or electronics before. Therefore, I have plenty of questions.
1- Does the color of the laser have anything to do with the strength of the beam? I would like to have the most powerful blue beam if possible. Red is cool too.
2- Please explain what the "hot option" is in a way you would explain it to a 5 year old child. Is that an option I would want?
3- I am looking to purchase a phaser that is as assembled as possible. I understand that you do not sell completed phasers. I would like to purchase from you one that is a "plug and play" kind of thing as much as feasible so I can't screw anything up.
Once again, thank you for your innovation and contribution making this a must-have for any Star Trek enthusiast. Look forward to hearing from you!
I recommend an M-140 @ 1.5 Amps for this build just because of the battery capacity, etc...

'Hot' option means that the driver is installed, current set, lead wires ready for your diode.

It can be assembled in 5 or 10 minutes...

Proper eye protection needed.

I'll send you a PM...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is online now   Reply With Quote
Old 05-04-2015, 09:49 PM #154
Junior Member
 
Join Date: May 2015
Posts: 6
Rep Power: 0
griphen2 is on a distinguished road
griphen2 griphen2 is offline
Junior Member
 
Join Date: May 2015
Posts: 6
Rep Power: 0
griphen2 is on a distinguished road
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Maybe you can Help. I put on lightsaber shows and want to do something new. Im trying to research how to put a red laser with a wide beam in a Star wars blaster gun with a momentary switch, strong enough to be seen from a stage for my show, so that it looks like the storm troopers laser from the movies. Can you help. I have no experience with lasers.
griphen2 is offline   Reply With Quote
Old 05-05-2015, 06:00 AM #155
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is online now
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Quote:
Originally Posted by griphen2 View Post
Maybe you can Help. I put on lightsaber shows and want to do something new. Im trying to research how to put a red laser with a wide beam in a Star wars blaster gun with a momentary switch, strong enough to be seen from a stage for my show, so that it looks like the storm troopers laser from the movies. Can you help. I have no experience with lasers.
I would say first read up on eye hazard with a high powered laser because it sounds like it can easily be an accident and harm people's eyes...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is online now   Reply With Quote
Old 05-31-2015, 03:06 AM #156
Hemlock_Mike's Avatar
Class 4 Laser
 
Join Date: Jan 2007
Location: North Iowa
Posts: 6,184
Rep Power: 4058
Hemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond repute
Hemlock_Mike Hemlock_Mike is online now
Class 4 Laser
Hemlock_Mike's Avatar
 
Join Date: Jan 2007
Location: North Iowa
Posts: 6,184
Rep Power: 4058
Hemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond reputeHemlock_Mike has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

JRob -- I finally took the time to add a mosfet switch into mine and with no adjustments to the V5 went from 800 mW to 1.3 W !!! This is a neat build and easy since I use the stock trigger switch.
These are fun BUT NOT A TOY............
HMike
__________________
It's a dog's life
Hemlock_Mike is online now   Reply With Quote
Old 05-31-2015, 07:08 AM #157
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is online now
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Quote:
Originally Posted by Hemlock_Mike View Post
JRob -- I finally took the time to add a mosfet switch into mine and with no adjustments to the V5 went from 800 mW to 1.3 W !!! This is a neat build and easy since I use the stock trigger switch.
These are fun BUT NOT A TOY............
HMike
I'm using the stock trigger with a different switch on the board...

For this build I like 1.5 Amps (1.3 Watts with 3 element lens) best for the battery capacity.

Using 2 X 14500 cells in parallel to double capacity...

See here:
1.5 Amp 445nm Phaser Build...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is online now   Reply With Quote
Old 05-31-2015, 08:42 PM #158
Pman's Avatar
Class 3B Laser
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 4,373
Rep Power: 12127
Pman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond repute
Pman Pman is offline
Class 3B Laser
Pman's Avatar
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 4,373
Rep Power: 12127
Pman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Hats off to Jayrob as a proud owner of one of these First on my list of owned stuff.
__________________
I'm not strange, I'm limited edition!

*Jayrob Star Trek Phaser*
# of Lasers - ***
# of DTR/510 laser adapters *
# of eGo/510 mods **
# of Batteries - ***
Wavelengths - 405, 445, 447, 450, 455, 462, 464, 470, 473, 473+, <515, 515, 520, 532, 589, 635, 638, 650, 660, 685, 808, 830, 980
Projector - PD2
O-Like mini red/green to yellow module
Beam Expanders - Dragon Lasers 2x & 5x with universal adapters
LPM's - Modified AW TEC, Custom 6.8W+ Ophir
Datalogger - ARG
Chargers - Ultrafire WF139, (2) Xtar WP2, Nitecore i2, UM20, (3) i4, (2) D4 , Opus BTC-3400 V2.2
Phlatlights - Jayrob PT-54 green 1000lm maglight, PT-54 red project box build, (3) PT-54 red, (2) PT-54 orange (3) PT-121 red, (2) PT-121 blue, (1) PT-121 green project work in progress 5000lm (1) PT-121 green

Links:

**"Pen Laser Thread"**
"Post your pics of unique builds no-one else has"
"Make your way overspec $5 pen focusable"
"Share your inexpensive builds thread"
"Pman special"

Last edited by Pman; 05-31-2015 at 08:55 PM.
Pman is offline   Reply With Quote
Old 06-07-2015, 06:24 PM #159
Junior Member
 
Join Date: Jun 2015
Location: Spain
Posts: 21
Rep Power: 0
CONNER is on a distinguished road
CONNER CONNER is offline
Junior Member
 
Join Date: Jun 2015
Location: Spain
Posts: 21
Rep Power: 0
CONNER is on a distinguished road
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Quote:
Originally Posted by Pman View Post
Hats off to Jayrob as a proud owner of one of these First on my list of owned stuff.
video!!!

I want one but I am denied in the electronics: (
CONNER is offline   Reply With Quote
Old 06-08-2015, 12:41 AM #160
Pman's Avatar
Class 3B Laser
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 4,373
Rep Power: 12127
Pman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond repute
Pman Pman is offline
Class 3B Laser
Pman's Avatar
 
Join Date: Nov 2012
Location: Rochester, NY
Posts: 4,373
Rep Power: 12127
Pman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond reputePman has a reputation beyond repute
Default Re: FS: Star Trek Phaser 'Hot' Option! Or, Individual Parts...

Pretty sure Jayrob has a couple ides on his site.
__________________
I'm not strange, I'm limited edition!

*Jayrob Star Trek Phaser*
# of Lasers - ***
# of DTR/510 laser adapters *
# of eGo/510 mods **
# of Batteries - ***
Wavelengths - 405, 445, 447, 450, 455, 462, 464, 470, 473, 473+, <515, 515, 520, 532, 589, 635, 638, 650, 660, 685, 808, 830, 980
Projector - PD2
O-Like mini red/green to yellow module
Beam Expanders - Dragon Lasers 2x & 5x with universal adapters
LPM's - Modified AW TEC, Custom 6.8W+ Ophir
Datalogger - ARG
Chargers - Ultrafire WF139, (2) Xtar WP2, Nitecore i2, UM20, (3) i4, (2) D4 , Opus BTC-3400 V2.2
Phlatlights - Jayrob PT-54 green 1000lm maglight, PT-54 red project box build, (3) PT-54 red, (2) PT-54 orange (3) PT-121 red, (2) PT-121 blue, (1) PT-121 green project work in progress 5000lm (1) PT-121 green

Links:

**"Pen Laser Thread"**
"Post your pics of unique builds no-one else has"
"Make your way overspec $5 pen focusable"
"Share your inexpensive builds thread"
"Pman special"
Pman is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


LinkBacks (?)
LinkBack to this Thread: http://laserpointerforums.com/f64/fs-star-trek-phaser-hot-option-individual-parts-46946.html
Posted By For Type Date
Colher de Sopa: Aprenda com seu cio - como fazer um phaser de verdade! This thread Refback 05-15-2017 05:24 PM
?????? ??????????? ?????? ?? ?????? ?????, ?????? ? ?????????? ?????????. ? ?????????? ?????? This thread Refback 02-28-2016 07:09 PM
?????? ?????, ???????, ???????????.????? 1, 6 ????? ?? 6900 ???-3, 5 ?????-?? 370$. This thread Refback 12-08-2015 07:45 AM
Jovem Nerd | Construa um Phaser que funciona de verdade! This thread Refback 07-12-2015 02:41 PM
Marazmnik This thread Refback 04-18-2015 04:37 PM
̳ LED Դ DIY CoolPlayBar - Powered by Discuz! This thread Refback 12-25-2014 02:12 PM
UFOForum.it - Costruire un faser alla Star Trek! This thread Refback 05-21-2014 02:05 PM
̳ CoolPlayBar ̳ ֵ̳ DIY ⼼ LED - Powered by Discuz! This thread Refback 04-18-2014 03:49 AM
Construa um Phaser que funciona de verdade! | Jovem Nerd This thread Refback 02-09-2014 11:53 PM
Real life Star Trek Phaser | Techendo - Tech Life. Culture. News. This thread Refback 07-17-2013 06:54 PM
ľֲ - - ̳ CoolPlayBar ֵ DIY ⼼ LED - Powered by Discuz! This thread Refback 05-23-2013 01:35 PM
ľֲ - - ̳ CoolPlayBar ֵ DIY ⼼ LED - Powered by Discuz! This thread Refback 05-06-2013 05:07 PM
ľֲ - - CoolPlayBar ̳ ֵ DIY ⼼ LED - Powered by Discuz! This thread Refback 05-01-2013 11:37 AM
DIY Star Trek phaser pops balloons and makes a cool noise - Boing Boing This thread Refback 04-29-2013 10:12 PM
ľֲ - - CoolPlayBar ֵ DIY ⼼ LED - Powered by Discuz! This thread Refback 04-18-2013 01:28 PM
connery61 comments on Star Trek Phaser This thread Refback 04-30-2012 08:49 PM
Guy Builds Real Star Trek Phaser, page 5 This thread Refback 04-29-2012 05:50 PM
Star Trek Phaser : videos This thread Refback 04-27-2012 08:24 PM
How to Excite a Man who is over 50..... | Forums This thread Refback 04-27-2012 06:20 PM
Guy Builds Star Trek Phaser - JREF Forum This thread Refback 04-27-2012 04:57 PM
JayRob Star Trek Phaser | Laser Diode This thread Refback 04-26-2012 04:52 PM
Star Trek fans should love this. Real laser phaser. : videos This thread Refback 04-20-2012 12:22 AM
My current weapon build: Type 2 Phaser Pistol This thread Refback 03-08-2012 12:06 AM
1.5 Amp 445nm Star Trek Phaser Modification - YouTube This thread Refback 12-17-2011 03:36 PM
?? ??? ?????????? ?????????? - ????? ? ???????? ???????? This thread Refback 11-15-2011 09:38 AM
BB MACHINEGUN OWNERS GROUP FORUMS - If It Does Not Shoot Metal It Does Not Belong Here :: DROZD MP661K BB Machinegun Owners Group Discussion Forum :: My current weapon build: Type 2 Phaser Pistol This thread Refback 10-07-2011 01:15 PM
Sndagsklippen &#8211; Del 21 | Myskoteket This thread Pingback 09-01-2011 12:33 AM
12X Blu-Ray Star Trek Phaser - Featured on HacknMod.com - YouTube This thread Refback 08-14-2011 04:48 PM
????????? This thread Refback 08-05-2011 10:13 AM
????????? This thread Refback 07-30-2011 01:23 PM
YouTube - 1.5 Amp 445nm Star Trek Phaser Modification This thread Refback 07-27-2011 01:16 AM
&#x202a;12X Blu-Ray Star Trek Phaser - Featured on HacknMod.com&#x202c;&rlm; - YouTube This thread Refback 07-18-2011 12:00 AM
Jay Robertson 1.3 Watt 445nm Laser Phaser | thelaserpointerhub.com This thread Refback 06-20-2011 11:36 PM
YouTube - &#x202a;12X Blu-Ray Star Trek Phaser - Featured on HacknMod.com&#x202c;&rlm; This thread Refback 05-27-2011 07:02 PM
YouTube - 1.5 Amp 445nm Star Trek Phaser Modification This thread Refback 04-29-2011 05:52 AM
1.5 Amp 445 Phaser Build! This thread Refback 04-13-2011 05:00 PM
YouTube - jayrob94561&#39;s Channel This thread Refback 04-11-2011 11:05 PM
YouTube - 1.3 Watt 445 Star Trek Phaser Modification This thread Refback 04-11-2011 11:18 AM
jayrob Build Kits, Lenses, and Other Stuff Listed Here! This thread Refback 03-23-2011 10:45 PM
Jovem Nerd Blog Archive Construa um Phaser que funciona de verdade! This thread Refback 03-21-2011 09:30 PM
Colher de Sopa: Aprenda com seu cio - como fazer um phaser de verdade! This thread Refback 03-21-2011 09:26 PM
DIY Laser Build: 12X Blu-ray Star Trek Phaser! | Hack N Mod This thread Refback 02-11-2011 09:39 PM
YouTube - 12X Blu-Ray Star Trek Phaser - Featured on HacknMod.com This thread Refback 02-09-2011 12:33 AM










Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 12:37 AM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC