Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: Pocket Mini Build Kit! - Easy Assembly!






jib77

jib77

0
Joined
Jun 19, 2010
Messages
718
Points
0
@ jayrob ... I ordered one of these bad boys from you (ricruiz). I already have a PHR + MicroBoostV1 installed in an Aixiz module like so:
2860-phr-build.jpg

Will it fit in this configuration or will I have to rework the driver to fit inside the pill like your examples?
 
Last edited:
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Mostly depends on your modding skills...

I'm sure it could be built to work like that, without the contact board at the bottom of the pill. You would make a contact point on your driver for the battery positive. And then using hard foam on the sides of the driver to keep it from bending side to side...

But you would also want to keep the battery tension off of the pins by supporting the driver to the module...

There is more than one way to make it work...

But it's easiest to do the build as I show it in my first post. (IMO)
 
Last edited:
jib77

jib77

0
Joined
Jun 19, 2010
Messages
718
Points
0
Thanks, I think I'll stick to your method, soldering some wires in sounds a lot easier.
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Hope you guys like them!




SpyderFire, I sent your Pocket Mini Chrome/copper heatsink kits today. (Saturday)

Thanks!
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Pocket Mini Chrome kits shipped today: (Monday)

jib77 (basic kit)
extelon (with 'Hot' option, copper heatsink, EzFocus adapter, 405-G-1)

extelon, your 'Hot' option is set at 120mA's per your request...

Hope you guys like them!
 
jib77

jib77

0
Joined
Jun 19, 2010
Messages
718
Points
0
Just got mine a few minutes ago ... man this thing is sweet! Can't wait to put it together.

Thanks much jayrob.

UPDATE:

Here is the PHR and driver installed on the brass ring:
2932-phr-microboost-chrome-pocket-mini-pill-floor-i-used-some-foam-rubber-isolate-driver-bottom.jpg


Completed:
2933-phr-chrome-pocket-mini-completed.jpg
 
Last edited:
A

Autist

0
Joined
Jun 15, 2009
Messages
47
Points
0
jayrob said:
Lane, just to let you know that I am sending your Pocket Mini basic kit and other item today. (Monday)

skellyd8758, your copper heatsink as well...

Thanks!
Click to expand...

Hi Jay,

Cu heatsink arrived today. :thanks:

Good fit too, nice job. :)


Thanks

David
 
BlaDe10

BlaDe10

0
Joined
Jul 5, 2010
Messages
12
Points
3
hook me up with the works. .. pocket rocket mini ...
]:eg::takeit: *how much can be done*
 
Last edited:
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
This kit has quite a few options to look over...

I don't sell the diodes or the battery though.

Take a look at the first post, and then send me a private message. I'll get you a total... :)
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
rpaloalto, just to let you know that I shipped your Pocket Mini Chrome 'Hot' option kit with copper heatsink today. (Tuesday)

Set at 600mA's per your request...

Thanks!
 
rpaloalto

rpaloalto

0
Joined
Jun 11, 2009
Messages
1,252
Points
63
Thanks jayrob.
This is one sweet little host. Ordering your hot option made building this laser a piece of cake:)

1-2.jpg

2-1.jpg
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
rpaloalto, glad you like it... nice pics. Thanks for posting! :)




AidanWhitwell, I sent your Pocket Mini 'Hot' option kits today. With EzFocus adapters and other items...

Thanks!
 
You must log in or register to reply here.




Top