Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Laser Pro Shop



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 11-25-2009, 06:07 AM #513
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
martianpc martianpc is offline
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

The battery is a primary 3.0 volt and is new. My DMM shows 2.92volts on the battery no load. I dont know how to test it with a load, maybe I should buy an energizer CR123 or so to try it maybe my battery just stinks. I have some Rechargeable batteries on order from DX if they ever come in, been weeks.


martianpc is offline   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 11-25-2009, 06:21 AM #514
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is offline
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

Sometimes the battery can show voltage, but when you put a load on it, it won't handle it...

This is more rare with primaries, but I have experienced it. Always start with buying a new battery to make sure.

The driver would be the next thing to check. The proper way to check the driver would be to remove the diode and use a test load.

But I know the driver was working properly, so I suspect that your battery is bad.

One more thing...

Take a close look at the picture in this post:
http://laserpointerforums.com/f39/fs...tml#post479406

Notice how I have the wires at the diode bent over. (wires bent, not pins)

This is to make more room. If you did not do this, your diode pins may be putting pressure on the driver, and perhaps causing some kind of connection issue or something...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is offline   Reply With Quote
Old 11-25-2009, 11:15 AM #515
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
martianpc martianpc is offline
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

I dont have a test load to test it with, and the battery was new. My heat shrink is bent. I'm Lost
martianpc is offline   Reply With Quote
Old 11-25-2009, 12:45 PM #516
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
martianpc martianpc is offline
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

So for some reason I don't get anything from it now. It was doing a soft faint puprle before off the cr123a but now I don't get any output at all. My diode is a tested GGW and I tried it again with a new cr123 and nothing. Any thoughts?
martianpc is offline   Reply With Quote
Old 11-25-2009, 02:15 PM #517
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
martianpc martianpc is offline
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

I take back my last post. I do get something from it but it can not even be seen if not in total blackness because it is so dim. I will buy a new energizer cr123 today see I'd that fixes it somehow but thus seems very weird. I thought that the flexdrive was an all or nothing driver. Works or not. Why would I get some light just have it be super dim? Sorry for so many posts -Mike
martianpc is offline   Reply With Quote
Old 11-25-2009, 03:21 PM #518
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is offline
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

It sounds like your diode LED'd...

That's always a bummer. I honestly don't think it is a driver or a battery problem.

Diodes are so sensitive. They can be damaged from the tiny spark from the tip of your finger. Or if they get too hot when soldering.

But from what you are describing, it sounds like the diode is dead...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is offline   Reply With Quote
Old 11-25-2009, 03:51 PM #519
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
martianpc martianpc is offline
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

But what doesn't make sense to me is that yesterday it was acting up the first time I powered it and was dim right away. When I gave it 4.2 volts it worked. Now it's back to Being dim. How can I test to find out if the diode or driver or maybe the host ground maybe is bad. I have the red diode frm the ggw sled. If I solder that on instead of the GGW will that tell me if the driver has a problem? Or not because red needs different voltage.
martianpc is offline   Reply With Quote
Old 11-25-2009, 04:02 PM #520
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is offline
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

It would tell you, as long as the red diode is working...

You don't have to worry about voltage. This is automatic in this set up. The diode will take only what it needs. And the current will run the red diode just fine at 190mA's. (I believe that's what we set it at right?)

Of course the pin connection is different for the red diode. But you know that correct?

Trouble shooting is best to have a test load for the driver. And also a test supply. I have a host with driver and two leads specifically for testing diodes so that I can check the diode.

99% of the time, in a case such as you are describing, it is the diode, not the driver.

But there is still the possibility that maybe there is a connection issue.

If the lead wires between the diode and driver were the connection problem, then this could easily kill the diode. Because the driver cap would charge and then give the diode a voltage spike.

But unless you moved the wire leads around a lot, I doubt that the solder points on the driver came loose...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is offline   Reply With Quote
Old 11-25-2009, 05:34 PM #521
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
martianpc martianpc is offline
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

I tried a new battery, no light. When I first put it together I had a problem immediatly with the light cmng on decent then immeditly gettng dim. All I had to personally do to put this together was solder your leads frm the driver to the leads on the diode that flamingpyro put on then heatshrink them and twist it together. It had probs rght away. This makes me doubt that I ruined the diode at least not on my own as I got it already pressed into the module. I will try the red diode and see if it works. I know the pins are different. Do you know what the pinout is for the red can diode from the GGW sled?

Sorry for my grammer and spelling I wrote this on my iPhone
martianpc is offline   Reply With Quote
Old 11-25-2009, 06:31 PM #522
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is offline
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

Remember, there is always the possibility of the wires getting twisted, or even 'pulled' a little if the assembly was not done very carefully.

Not saying that it happened, but just something to think about if it is a 'short' issue.

Anyway, here is the red diode pin connection: (take a close look at the wire leads that are soldered to the driver. But note that my soldering is usually on the back side of the driver)



Also, not that it would make you feel any better, but most people kill a diode or two in the learning process.

Building becomes easy to do, but there is a learning curve that we all have to go through.

Even though I've probably built a couple of hundred lasers or more, I can still kill a diode once in a while. It can happen very easy to anybody...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!


Last edited by jayrob; 11-25-2009 at 06:33 PM.
jayrob is offline   Reply With Quote
Old 11-25-2009, 10:35 PM #523
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
martianpc martianpc is offline
Class 1 Laser
 
Join Date: Nov 2009
Location: York, PA
Posts: 82
Rep Power: 89
martianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond reputemartianpc has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

If I killed the diod that sucks all I did was solder two wires never got near the driver or the diode when I had problems. What do I need to know about taking out the driver and checking the solders on the back side. I see the double sided tape on there. To solder in the red diode I will need to put some new wire on the driver as yours is too short now. I have mouse cord wire standing by. I should have a chance to put the red diode on tonight or tomorrow morning to test.
martianpc is offline   Reply With Quote
Old 11-26-2009, 12:02 AM #524
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is offline
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

If you did not let the wires get moved around a lot, and you don't suspect that they may have a bad connection at the driver, then you don't need to take the driver out. Just expose the solder at the pins, and load your tip with a little solder. Then touch it to the pin while slightly pulling on the wire, and it will unsolder almost instantly...

If you have to take the driver out, you just have to carefully pry it up from the edges. The tape is very sticky, but if done carefully, you will be able to pry it up.

If you do this, then you will be checking all solder connections. If you can use the first method, and unsolder the wire from the diode, you would still be able to put a bit more solder on the top side of the FlexDrive to make sure of the connections without necessarily removing the driver.

But as you can see, the driver is very small, and you need a fine tipped solder iron. Make sure your tip is clean, pre-tinned, and a little flux on the solder is also very helpful...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is offline   Reply With Quote
Old 11-27-2009, 09:46 PM #525
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is offline
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

aynonemus serv3d, just to let you know that I am sending your Pocket Mini 'Hot' option kit (and extra item) today. (Friday)

I have it set at 420mA's per your request...

Thanks!
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is offline   Reply With Quote
Old 11-30-2009, 07:08 PM #526
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is offline
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

Nemo2423, congratulations on your raffle drawing!

I am sending your Pocket Mini kit with copper heatsink today. (Monday)

Enjoy!
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!


Last edited by jayrob; 11-30-2009 at 07:10 PM.
jayrob is offline   Reply With Quote
Old 12-03-2009, 02:20 AM #527
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is offline
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

Pocket Mini kits that shipped today: (Wednesday)

lazer (and other items)
Deldrice ('Hot' option set at 170mA's - dust cap included as well)

Hope your builds go well!
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is offline   Reply With Quote
Old 12-03-2009, 02:27 AM #528
lazer's Avatar
Class 2 Laser
 
Join Date: Dec 2008
Location: Phoenix
Posts: 361
Rep Power: 11
lazer will become famous soon enoughlazer will become famous soon enough
lazer lazer is offline
Class 2 Laser
lazer's Avatar
 
Join Date: Dec 2008
Location: Phoenix
Posts: 361
Rep Power: 11
lazer will become famous soon enoughlazer will become famous soon enough
Default Re: FS: Pocket Mini Build Kit! - Easy Assembly!

Cool! Thanks.
lazer is offline   Reply With Quote
Reply

Tags
blu-ray, jayrob, kit, pocket mini, red, techspy2000 = arenared





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


LinkBacks (?)
LinkBack to this Thread: http://laserpointerforums.com/f64/fs-pocket-mini-build-kit-easy-assembly-22537.html
Posted By For Type Date
Anyone got some info? This thread Refback 11-28-2012 01:40 PM
jayrob Projects and Tutorials Listed Here! This thread Refback 10-17-2012 07:54 AM
FS: PL Series Modules From Lasever (LAB/Industrial) This thread Refback 09-12-2012 07:22 PM
SELLING LASEVER new product: LSR532PL-TEC This thread Refback 09-07-2012 01:26 AM
Ultrafire WF-602c Laser Host & Heat Sink kit (silver) [ULTR602S] - $19.99 : Cajunlasers Store This thread Refback 08-10-2012 09:14 PM
Ultrafire WF-602c Laser Host & Heat Sink kit (silver) [ULTR602S] - $24.99 : Cajunlasers Store This thread Refback 07-11-2012 06:45 PM
Tritium Definition. Crossword Dictionary. This thread Refback 03-26-2012 01:25 PM
FlexMod/FlexDrive This thread Refback 03-23-2012 04:27 PM
where to buy Prism pairs This thread Refback 03-20-2012 01:09 PM
Popped my first balloon ..... This thread Refback 01-05-2012 07:00 PM
Custom Burning 445nm Blue Laser - YouTube This thread Refback 11-27-2011 09:53 AM
SerpantSlayer's Channel - YouTube This thread Refback 11-22-2011 11:56 PM
Ultrafire WF-602c Laser Host & Heat Sink kit (silver) [ULTR602S] - $29.99 : Cajunlasers Store This thread Refback 10-29-2011 05:08 PM
Ultrafire WF-602c Laser Host & Heat Sink kit [ULTR602] - $29.99 : Cajunlasers Store This thread Refback 08-27-2011 08:27 AM
Ultrafire WF-602c Laser Host & Heat Sink kit [ULTR602] - $39.99 : Cajunlasers Store This thread Refback 07-16-2011 01:52 AM
pre-orders/interest for high quality module kits - Page 6 This thread Refback 06-18-2011 02:11 AM
Announcement: New laser show software available: Procedural dynamic frames, Much More - Page 2 This thread Refback 05-30-2011 06:24 PM
FlexMod P3 Analog/TTL Laser Diode Driver - Page 6 This thread Refback 05-24-2011 01:32 PM
jayrob Build Kits, Lenses, and Other Stuff Listed Here! This thread Refback 03-12-2011 02:33 AM
????????? This thread Refback 02-26-2011 11:48 AM
FS: 1000 Lumen XM-L T6 Maglite Modification Kit - Parts, or Complete Flashlight! This thread Refback 02-16-2011 10:25 PM










Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 06:17 AM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC