FS: Pocket Mini Build Kit! - Easy Assembly! - Page 2 - Laser Pointer Forums

daguin · 01-15-2009, 11:08 PM

Quote:

Originally Posted by Day

ooo so thats what the flex drive is for *:

well its on its way *

Well -- we don't really know what the condition of the driver from you is. * Although I WILL make the trade worth your effort (especially since you just offered straight up) no matter what condition it is in, I am not relying on it for the builds I have to get done right away.

Thank you again.

Peace,
dave

Quote:

Originally Posted by Spyderz20x6

You never knew what a flexdrive was for? :-?

;D He knows what "A" driver is for. He just didn't know what I needed one for. He responded to my "plea" for three flexdrives in another thread.

Peace,
dave

DayOfShadows · 01-15-2009, 11:25 PM

It seemed in good condition, i got it from anouther member, i never used it either , i just removed some solder off of it and put it on my desk.

daguin · 01-15-2009, 11:30 PM

Quote:

Originally Posted by Day

It seemed in good condition, i got it from anouther member, i never used it either , i just removed some solder off of it and put it on my desk.

SWEET! I certainly am NOT saying anything negative about it or you. I VERY MUCH appreciate your actions. The driver is just kind of an "unknown" right now.

Peace,
dave

DayOfShadows · 01-15-2009, 11:56 PM

Thank you, ya i didnt test it, ive never had a brand new flex so i didnt really know what to expect. i think you will like the extras i threw in there too. heck the extras are worth more than the flex it self

daguin · 01-15-2009, 11:58 PM

Quote:

Originally Posted by Day

Thank you, ya i didnt test it, ive never had a brand new flex so i didnt really know what to expect. i think you will like the extras i threw in there too. heck the extras are worth more than the flex it self *

I LOVE trades! *

8-) ;D

**EDIT** I just realized that this is a TOTAL threadjack :-[

Sorry Jayrob :-/

DayOfShadows · 01-16-2009, 12:09 AM

ya me too :-[ sorry Jayrob :-/

jayrob · 01-16-2009, 01:21 AM

Quote:

Originally Posted by daguin

[quote author=Day link=1231664443/20#28 date=1232067361]Thank you, ya i didnt test it, ive never had a brand new flex so i didnt really know what to expect. i think you will like the extras i threw in there too. heck the extras are worth more than the flex it self *

I LOVE trades! *

8-) ;D

**EDIT** I just realized that this is a TOTAL threadjack *:-[Sorry Jayrob :-/[/quote]

No problem at all Dave!

Hoping to see your post in this thread once you build your Pocket Mini Kits into lasers!

I just sent you your 5 FlexDrives today...
Jay

jayrob · 01-23-2009, 08:31 PM

Shawn, your Pocket Mini Kit and PHR sled package is being shipped today! (Friday)

Please post back when you get it!

Jay

lasersbee · 01-23-2009, 09:42 PM

Hey Jay.... received my "Pocket Mini Build Kit" today.... I'm very happy with
my purchase... *8-)

Very nice.... just needed to force out the "Pill" edges where (I assume) the
Chuck held it at some point... (it was a bit out of round) ...
The brass ring wouldn't fit without a small tweak... (nothing serious...)

I understood by your clear instructions that a few dabs of Thermal epoxy
between the Brass ring where it fits into the "Pill" will stop the two parts
from turning in one another....

What is the trick to get the Heatsink to turn at the same time as the "Pill"
when screwing it into the host... so that we don't twist the wires between the
two parts.... :-?

Jerry

jayrob · 01-23-2009, 09:52 PM

Thanks for posting back Jerry!

For threading the assembly into the head of the host, I put a dust cap on the lens, and just pinch the heatsink/pill assembly between my fingers (after I get it started into the head), then use my other hand to spin the head on. You will switch your thumb and ring finger at the half way point, because your ring finger will need to be inside of the head to get a good 'pinch'.

When the heatsink makes contact with the front of the head (inside), you just need to do a final 'tightening' of the assembly by using a pair of needle nose pliers, which will fit into the two little slots at the bottom of the pill...
Jay

lasersbee · 01-23-2009, 10:16 PM

Quote:

Originally Posted by jayrob

Thanks for posting back Jerry!

For threading the assembly into the head of the host, I put a dust cap on the lens, and just pinch the heatsink/pill assembly between my fingers (after I get it started into the head), then use my other hand to spin the head on. You will switch your thumb and ring finger at the half way point, because your ring finger will need to be inside of the head to get a good 'pinch'.

When the heatsink makes contact with the front of the head (inside), you just need to do a final 'tightening' of the assembly by using a pair of needle nose pliers, which will fit into the two little slots at the bottom of the pill...
Jay

Yeah.... I read that in your instructions.... It just now clicked.... you basically turn the two ends
together... and I saw the 2 notches on the brass ring....Thanks...

Jerry

jayrob · 01-23-2009, 10:38 PM

Quote:

Originally Posted by lasersbee

Hey Jay.... received my "Pocket Mini Build Kit" today.... I'm very happy with
my purchase... *8-)

Very nice.... just needed to force out the "Pill" edges where (I assume) the
Chuck held it at some point... (it was a bit out of round) ...
The brass ring wouldn't fit without a small tweak... (nothing serious...)

I understood by your clear instructions that a few dabs of Thermal epoxy
between the Brass ring where it fits into the "Pill" will stop the two parts
from turning in one another....

What is the trick to get the Heatsink to turn at the same time as the "Pill"
when screwing it into the host... so that we don't twist the wires between the
two parts.... :-?

Jerry

Actually that little 'dent' at the bottom of the pill, is the manufacture's way of securing the brass ring in place...

Edit: At least I thought so, but you are probably right. (in hind sight) And I have since changed the way that I drill out the pill. I grip it from the other side now. The 'thicker' side of the pill. That way there will be no marks from the lathe chuck in the delicate end of the pill. Thanks for pointing that out Jerry...

But for our laser mod, I recommend a couple of 'dabs' of thermal adhesive between the brass ring and the pill, because we want to tighten it fairly 'snug' and we don't want the ring to 'spin' in the pill.

You will find that the ring will go on very easy using pliers. (carefully - evenly)
Jay

lasersbee · 01-24-2009, 12:11 AM

Yeah that makes more sense... I assumed it was Chuck marks because there were
3.... equally spaced... :-[
I'll let you know when I get it finished.... after I find some free time to assemble it that is...

Thanks for all your help Jay...

Jerry

jamilm9 · 01-25-2009, 04:14 AM

will you still offer this in a few months when i have money for a violet.

jayrob · 01-25-2009, 05:56 AM

It really is a very nice build, and I see no reason to stop offering the kit!

Jay

jamilm9 · 01-25-2009, 02:53 PM

Quote:

Originally Posted by jayrob

It really is a very nice build, and I see no reason to stop offering the kit!

Jay

ok thanks

jayrob · 01-26-2009, 11:19 PM

morphs, I am shipping your Pocket Mini Kit with other items today! (Monday)

Please post back to let others know how you like the kit!

Jay

jayrob · 01-27-2009, 08:49 PM

Brown_Wigga, I am shipping your Pocket Mini Kit with other items today! (Tuesday)

Please let me know when you get the package...

daguin, did you try the Pocket Mini build yet? Please post!

Jay

daguin · 01-27-2009, 10:02 PM

Quote:

Originally Posted by jayrob

daguin, did you try the Pocket Mini build yet? Please post!

Jay

Not yet. I've just been too busy with winter session and the latest "sale." They will probably wait until after my last order of Dorcy Jr's arrives. I have an order for a matched set. Then I'll sit down and build all 5 lasers in succession. Then I'll be all out of drivers and diodes. I've still got a few things coming from Kenom before I'm done.

Peace,
dave

jayrob · 01-28-2009, 07:55 PM

Hey Glenn, I'm sending your Pocket Mini Kit today! (Wednesday)

I know you guys will love these kits! I sure would like to know what you think... *Please post back!

Jay

jayrob · 02-02-2009, 07:39 AM

Spyderz20x6, your Pocket Mini Kit with other items will be in tomorrow's mail! (Monday)

Please post back with you opinion of the build kit!

Jay

Spyderz20x6 · 02-02-2009, 06:57 PM

Quote:

Originally Posted by jayrob

Spyderz20x6, your Pocket Mini Kit with other items will be in tomorrow's mail! (Monday)

Please post back with you opinion of the build kit!

Jay

Oh, i will

Brown_Wigga · 02-03-2009, 11:13 PM

I orderd the pocket mini kit on Jan 27th of 2009, I recieved the package on Feb 3 of 2009 (Today). Everything is nicely wrapped and protected and comes with instructions. Everything is good quality and looks great. All the hard work is pretty much done, Thank you. I will give you rep once I figure out how lol.

jayrob · 02-04-2009, 02:21 AM

Hey thanks for posting back!

I am surprised that these kits are not going even faster than they have been...

They really are a superb build! 8-)
Jay

elitesniper · 02-05-2009, 12:16 AM

Im sure they will be a an excelent build! Can a dot of ca glue be used imstead of thermal glue? Also by any chance would you be able to ship it on thursday? So maybe i will get it on saturday because monday is a federal holiday, plus i really want to finish this build this weekend

01-15-2009, 11:25 PM	#27
DayOfShadows Class 2M Laser Join Date: Nov 2008 Posts: 861 Rep Power: 28	Re: Pocket Mini Kit! - Host, Heatsink, Drilled Pil It seemed in good condition, i got it from anouther member, i never used it either , i just removed some solder off of it and put it on my desk.

01-15-2009, 11:56 PM	#29
DayOfShadows Class 2M Laser Join Date: Nov 2008 Posts: 861 Rep Power: 28	Re: Pocket Mini Kit! - Host, Heatsink, Drilled Pil Thank you, ya i didnt test it, ive never had a brand new flex so i didnt really know what to expect. i think you will like the extras i threw in there too. heck the extras are worth more than the flex it self

01-16-2009, 12:09 AM	#31
DayOfShadows Class 2M Laser Join Date: Nov 2008 Posts: 861 Rep Power: 28	Re: Pocket Mini Kit! - Host, Heatsink, Drilled Pil ya me too :-[ sorry Jayrob :-/

01-23-2009, 08:31 PM	#33
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 7,428 Rep Power: 307	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Shawn, your Pocket Mini Kit and PHR sled package is being shipped today! (Friday) Please post back when you get it! Jay __________________ Personal lasers: RPL 425, O-like 250, Evolution Pro 150, Nova X-105, Nexus 95, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY red, blu-ray, and green builds... (now 445!) Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: Parts - 12X Star Trek Phaser! Awesome 12X build! Must see my Youtube video linked in my tutorial... * FS: DIY Green Build Kits! Easy assembly in minutes! * FS: Pocket Mini Build Kits! 'HOT' option for FlexDrive installed! Click here for a list of my build kits! Projects and tutorials too!

01-23-2009, 09:42 PM	#34
lasersbee Class 4 Laser Join Date: Sep 2008 Location: Quebec, Canada Posts: 7,729 Rep Power: 303	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Hey Jay.... received my "Pocket Mini Build Kit" today.... I'm very happy with my purchase... 8-) Very nice.... just needed to force out the "Pill" edges where (I assume) the Chuck held it at some point... (it was a bit out of round) ... The brass ring wouldn't fit without a small tweak... (nothing serious...) I understood by your clear instructions that a few dabs of Thermal epoxy between the Brass ring where it fits into the "Pill" will stop the two parts from turning in one another.... What is the trick to get the Heatsink to turn at the same time as the "Pill" when screwing it into the host... so that we don't twist the wires between the two parts.... :-? Jerry __________________ LASERS* ■790-808nm ■650-660nm ■532nm ■445nm ■405nm (5mW - 30,000mW) METERS LaserBee I and II (shop use) + Thermopile Newport 1825-C Digital/Analog + 818T Thermopile Scientec 365 + Thermopile FREE 1 Ohm Test Load Resistors... FREE 1 Ohm Test Load Resistors HLPM II 200mW LPM Module + Shipping $54.99 HLPM II 200mW LPM Module 1 Watt LaserBee I LPM here on LPF (15% OFF) 1Watt USB LaserBee I + Data Logging LPF Members 15% discount NEW 3.2 Watt LaserBee II LPM here on LPF (10% OFF) New 3.2 Watt USB LaserBee II LPF Members 10% discount Wow New 3.2Watt USB LaserBee II LPM REVIEW

01-23-2009, 09:52 PM	#35
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 7,428 Rep Power: 307	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Thanks for posting back Jerry! For threading the assembly into the head of the host, I put a dust cap on the lens, and just pinch the heatsink/pill assembly between my fingers (after I get it started into the head), then use my other hand to spin the head on. You will switch your thumb and ring finger at the half way point, because your ring finger will need to be inside of the head to get a good 'pinch'. When the heatsink makes contact with the front of the head (inside), you just need to do a final 'tightening' of the assembly by using a pair of needle nose pliers, which will fit into the two little slots at the bottom of the pill... Jay __________________ Personal lasers: RPL 425, O-like 250, Evolution Pro 150, Nova X-105, Nexus 95, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY red, blu-ray, and green builds... (now 445!) Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: Parts - 12X Star Trek Phaser! Awesome 12X build! Must see my Youtube video linked in my tutorial... * FS: DIY Green Build Kits! Easy assembly in minutes! * FS: Pocket Mini Build Kits! 'HOT' option for FlexDrive installed! Click here for a list of my build kits! Projects and tutorials too!

01-24-2009, 12:11 AM	#38
lasersbee Class 4 Laser Join Date: Sep 2008 Location: Quebec, Canada Posts: 7,729 Rep Power: 303	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Yeah that makes more sense... I assumed it was Chuck marks because there were 3.... equally spaced... :-[ I'll let you know when I get it finished.... after I find some free time to assemble it that is... Thanks for all your help Jay... Jerry __________________ LASERS ■790-808nm ■650-660nm ■532nm ■445nm ■405nm (5mW - 30,000mW) METERS LaserBee I and II (shop use) + Thermopile Newport 1825-C Digital/Analog + 818T Thermopile Scientec 365 + Thermopile FREE 1 Ohm Test Load Resistors... FREE 1 Ohm Test Load Resistors HLPM II 200mW LPM Module + Shipping $54.99 HLPM II 200mW LPM Module 1 Watt LaserBee I LPM here on LPF (15% OFF) 1Watt USB LaserBee I + Data Logging LPF Members 15% discount NEW 3.2 Watt LaserBee II LPM here on LPF (10% OFF) New 3.2 Watt USB LaserBee II LPF Members 10% discount Wow New 3.2Watt USB LaserBee II LPM REVIEW

01-25-2009, 04:14 AM	#39
jamilm9 Class 3R Laser Join Date: Jan 2008 Location: canada eh Posts: 1,864 Rep Power: 122	Re: FS: Pocket Mini Build Kit! - Easy Assembly! will you still offer this in a few months when i have money for a violet. __________________ Used to have 26 rep points I am leet

01-25-2009, 05:56 AM	#40
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 7,428 Rep Power: 307	Re: FS: Pocket Mini Build Kit! - Easy Assembly! It really is a very nice build, and I see no reason to stop offering the kit! Jay __________________ Personal lasers: RPL 425, O-like 250, Evolution Pro 150, Nova X-105, Nexus 95, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY red, blu-ray, and green builds... (now 445!) Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: Parts - 12X Star Trek Phaser! Awesome 12X build! Must see my Youtube video linked in my tutorial... * FS: DIY Green Build Kits! Easy assembly in minutes! * FS: Pocket Mini Build Kits! 'HOT' option for FlexDrive installed! Click here for a list of my build kits! Projects and tutorials too!

01-26-2009, 11:19 PM	#42
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 7,428 Rep Power: 307	Re: FS: Pocket Mini Build Kit! - Easy Assembly! morphs, I am shipping your Pocket Mini Kit with other items today! (Monday) Please post back to let others know how you like the kit! Jay __________________ Personal lasers: RPL 425, O-like 250, Evolution Pro 150, Nova X-105, Nexus 95, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY red, blu-ray, and green builds... (now 445!) Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: Parts - 12X Star Trek Phaser! Awesome 12X build! Must see my Youtube video linked in my tutorial... * FS: DIY Green Build Kits! Easy assembly in minutes! * FS: Pocket Mini Build Kits! 'HOT' option for FlexDrive installed! Click here for a list of my build kits! Projects and tutorials too!

01-27-2009, 08:49 PM	#43
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 7,428 Rep Power: 307	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Brown_Wigga, I am shipping your Pocket Mini Kit with other items today! (Tuesday) Please let me know when you get the package... daguin, did you try the Pocket Mini build yet? Please post! Jay __________________ Personal lasers: RPL 425, O-like 250, Evolution Pro 150, Nova X-105, Nexus 95, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY red, blu-ray, and green builds... (now 445!) Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: Parts - 12X Star Trek Phaser! Awesome 12X build! Must see my Youtube video linked in my tutorial... * FS: DIY Green Build Kits! Easy assembly in minutes! * FS: Pocket Mini Build Kits! 'HOT' option for FlexDrive installed! Click here for a list of my build kits! Projects and tutorials too!

01-28-2009, 07:55 PM	#45
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 7,428 Rep Power: 307	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Hey Glenn, I'm sending your Pocket Mini Kit today! (Wednesday) I know you guys will love these kits! I sure would like to know what you think... Please post back! Jay __________________ Personal lasers:* RPL 425, O-like 250, Evolution Pro 150, Nova X-105, Nexus 95, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY red, blu-ray, and green builds... (now 445!) Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: Parts - 12X Star Trek Phaser! Awesome 12X build! Must see my Youtube video linked in my tutorial... * FS: DIY Green Build Kits! Easy assembly in minutes! * FS: Pocket Mini Build Kits! 'HOT' option for FlexDrive installed! Click here for a list of my build kits! Projects and tutorials too!

02-02-2009, 07:39 AM	#46
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 7,428 Rep Power: 307	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Spyderz20x6, your Pocket Mini Kit with other items will be in tomorrow's mail! (Monday) Please post back with you opinion of the build kit! Jay __________________ Personal lasers: RPL 425, O-like 250, Evolution Pro 150, Nova X-105, Nexus 95, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY red, blu-ray, and green builds... (now 445!) Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: Parts - 12X Star Trek Phaser! Awesome 12X build! Must see my Youtube video linked in my tutorial... * FS: DIY Green Build Kits! Easy assembly in minutes! * FS: Pocket Mini Build Kits! 'HOT' option for FlexDrive installed! Click here for a list of my build kits! Projects and tutorials too!

02-03-2009, 11:13 PM	#48
Brown_Wigga Member Join Date: Jan 2009 Posts: 32 Rep Power: 0	Re: FS: Pocket Mini Build Kit! - Easy Assembly! I orderd the pocket mini kit on Jan 27th of 2009, I recieved the package on Feb 3 of 2009 (Today). Everything is nicely wrapped and protected and comes with instructions. Everything is good quality and looks great. All the hard work is pretty much done, Thank you. I will give you rep once I figure out how lol.

02-04-2009, 02:21 AM	#49
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 7,428 Rep Power: 307	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Hey thanks for posting back! I am surprised that these kits are not going even faster than they have been... They really are a superb build! 8-) Jay __________________ Personal lasers: RPL 425, O-like 250, Evolution Pro 150, Nova X-105, Nexus 95, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY red, blu-ray, and green builds... (now 445!) Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: Parts - 12X Star Trek Phaser! Awesome 12X build! Must see my Youtube video linked in my tutorial... * FS: DIY Green Build Kits! Easy assembly in minutes! * FS: Pocket Mini Build Kits! 'HOT' option for FlexDrive installed! Click here for a list of my build kits! Projects and tutorials too!

02-05-2009, 12:16 AM	#50
elitesniper Class 2 Laser Join Date: Dec 2008 Location: California Posts: 398 Rep Power: 3	Re: FS: Pocket Mini Build Kit! - Easy Assembly! Im sure they will be a an excelent build! Can a dot of ca glue be used imstead of thermal glue? Also by any chance would you be able to ship it on thursday? So maybe i will get it on saturday because monday is a federal holiday, plus i really want to finish this build this weekend __________________ blue ray leadlight in progress

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://laserpointerforums.com/f64/fs-pocket-mini-build-kit-easy-assembly-22537.html
Posted By	For	Type	Date
View Profile: jayrob - Photonlexicon	This thread	Refback	08-02-2010 03:10 AM
pre-orders/interest for high quality module kits	This thread	Refback	06-24-2010 09:21 AM
where to buy Prism pairs	This thread	Refback	06-22-2010 04:39 AM
445nm lensing options - discuss them all here!	This thread	Refback	06-07-2010 07:09 AM
445 experiments	This thread	Refback	06-03-2010 07:17 AM
445nm Diode Group Buy?	This thread	Refback	06-02-2010 01:11 PM
Anyone got some info?	This thread	Refback	05-24-2010 05:37 PM
Tutorial: 12X Star Trek Phaser Mod! - Laser Pointer Forums - Discuss Lasers & Laser Pointers	This thread	Refback	04-26-2010 06:52 AM
jayrob Build Kits, Lenses, and Other Stuff Listed Here!	This thread	Refback	01-09-2010 02:22 PM
jayrob Projects and Tutorials Listed Here!	This thread	Refback	01-06-2010 02:47 PM
jayrob Build Kits, Lenses, and Other Stuff Listed Here! - Page 2 - Photonlexicon	This thread	Refback	11-28-2009 06:15 PM
The Pocket Mini - Jayrob exclusive! [P-mini] - $38.99 : Dark Lasers, The one-stop shop for all your DIY laser needs!	This thread	Refback	11-16-2009 09:23 PM
jayrob Build Kits, Lenses, and Other Stuff Listed Here! - Photonlexicon	This thread	Refback	10-30-2009 04:03 AM
jayrob Projects and Tutorials Listed Here! - Photonlexicon	This thread	Refback	10-15-2009 12:52 PM
The Pocket Mini - Jayrob exclusive! [P-mini] - $43.00 : Dark Lasers, The one-stop shop for all your DIY laser needs!	This thread	Refback	08-13-2009 06:04 PM