Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: MXDL Host & Heatsink Combo! (4171 or 3405)

jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Supermaniac1423, I sent your 3405 V2 'Hot' option kit and other items today. (Thursday)

I set it at 380mA's per your request...

Hope your build goes well!
 





K

Kittamur

0
Joined
Aug 1, 2010
Messages
16
Points
0
Jayrob, I want to order the 4171 kit, hot option with a micro boost drv,
and 405-G-1 lens. I need to know how to pay you with Paypal. Costs come out to some where around $115.00. If the Boost drive is set to 700ma does the driver heat up badly, I want to run a 1watt Blue diode.
Thanks
Kittamur
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
rigairshadaw, I'm sending your 3405 host/V2 heatsink combo with lead wires soldered on today. (Friday)

tazlynx51, same goes for your 3405 V2 'Hot' option kit with modified battery holder and other items.

Set at 1 Amp per your request.

Scoots, same goes for our 3405 V1 heatsink...

Thanks!
 
K

Kittamur

0
Joined
Aug 1, 2010
Messages
16
Points
0
Jayrob, I need a heatsink for a 3405 Boost Driver, how much and do you have any all ready made up?

Thanks
Kittamur
 
K

Kittamur

0
Joined
Aug 1, 2010
Messages
16
Points
0
Sorry about the email thing...
I guess I have read too many things today, what do you suggest on the driver heatsink on the 3405 using the pill as a heatsink or a made up heatsink. I am getting punchy.....
Thanks
kittamur
 
K

Kittamur

0
Joined
Aug 1, 2010
Messages
16
Points
0
I must have something wrong, The flexdrive will go up to 1.4a, sorry I messed up, I thought the boost only went that high, OK never mind sorry I just got really tired...
 
K

Kittamur

0
Joined
Aug 1, 2010
Messages
16
Points
0
Is there a diagram in the forum that shows how to hook up a TTL?
Thanks
Kittamur
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
There is a forum in LPF that is devoted to drivers. You should post your question there to get answers from some who may be able to help...


Kittamur said:
I must have something wrong, The flexdrive will go up to 1.4a, sorry I messed up, I thought the boost only went that high, OK never mind sorry I just got really tired...
Click to expand...




The Micro Boost is great up to about 1075mA's or so using the 2 jumper setting as shown in the documentation...

It will adjust to about 1075mA's give or take 40mA's.

The V5 FlexDrive (which will be at least a month before drlava has more), can go to 1.5 Amps or so. By putting a heatsink on the 5 pin chip, it helps the driver to keep from over heating.

But it is not really rated for that kind of power with a 4+ volt diode.

Which is why I set it that way only by request, and at your own risk.

That said, a few of us are setting them up like that, and they seem stable...
 
Last edited:
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
morgan@ms, I sent your 3405 'Hot' option kit with options today. (Friday)

Kittamur, same goes for your 3405 heatsinks (and other heatsinks)

Thanks!
 
B

Blackychan3000

0
Joined
Aug 26, 2010
Messages
24
Points
0
Jayrob i would like to buy one of your mxdl 3405 v2 heatsinks, please pm the payment instructions. Thank you
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Got you covered...

But I do have a back log of orders. Sending PM...
 
Last edited:
You must log in or register to reply here.




Top