Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: ***MXDL Custom Machined Heatsinks***

J

jphdg

0
Joined
Mar 25, 2009
Messages
2
Points
0
jphdg said:
If you are going to DIY build, Don't think about it just go for this.  

I used the 3405 host and heat sink from Jay along with the FlexDrive board.  For a red build I used a Sony 16X DVD burner diode.

Mine is set for about 200 - 220mw output using a AR coated lens and its one decent laser!

I got everything off Jay except my diode and it was very easy to assemble.
Postage from US to Australia was laser fast.

Everything fitted together perfectly.  If you want to build your own laser, this is a good way to go.  The 3405 host and heat sink is very robust and feels it.
I like stuff with quality, and this gear is.

I have a few pictures I have tried to put them in but don't think it is working.  I will try again later if this has not worked.

John Australia.
Click to expand...
Here is an overview of everything just out of the bag ready to get started.
 

Attachments

  • IMG_1228a.JPG
    IMG_1228a.JPG
    89.7 KB · Views: 103





jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
You know, I have always shown very detailed tutorials and included measurements in many cases so you can DIY...

But some will take my measurements, and start selling the same thing as I do.

So I would rather not post my measurements anymore. People will have to measure the host their self. Or just buy a heatsink and measure it.
Jay
 
leukoplast

leukoplast

0
Joined
Jan 7, 2007
Messages
368
Points
18
Ok that's fine. I was just curious cause I have a host I may want to DIY someday and its about the same size as your pocket mini. And I'm sure you could sell me a pocket mini heatsink, which may fit right into this one.

But the build may be a ways off and the tailcap clicky stopped working so I probably won't be using this host for a DIY anymore.
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
You can just PM me, or even send me the host. Then I could make a heatsink for it! :) The switch can probably be fixed too...
Jay
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
lowrydr310, your (new style) 4171/AixiZ version 2 heatsink will be in tomorrow's mail. (Tuesday)
Jay
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Your welcome! Thanks for letting me know you got it. :)






sk8er4514, your 3405/AixiZ version 1 heatsinks shipped today! (Friday)
Thanks!
Jay
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
I can see from the DX pictures that that host would be an easy build the way it comes apart at the head. It would need it's own custom heatsink.

I would have to get the host in hand in order to fit a heatsink. Then I would have the heatsink design. They would be the same price as these heatsinks. $23 plus $3 dollars shipping...
Jay
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Bastain, your (new style) 4171/AixiZ version 1 heatsink shipped today. (Tuesday)
Thanks!
Jay
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
xamboozi, your (new style) 4171/AixiZ version 2 heatsink shipped today. (Friday)
Thanks!
Jay
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Conor, I'm shipping your (new style) 4171/AixiZ version 1 heatsink and other items today...

Thanks!
Jay
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
urvi, just to let you know that I'm shipping your 3405/AixiZ version 2 heatsink today...
Jay
 
You must log in or register to reply here.




Top