FS: MXDL Custom Machined Heatsinks

chopper · Oct 30, 2008

chopper said:
Heatsinks came today!! Top notch service! +1 (whence I have enough posts )

The time has come! Thanks again...

jayrob · Oct 31, 2008

Thanks for the rep chopper!

Glad you like those heatsinks...

kernelpanic, your 3405/AixiZ heatsinks will be in tomorrow's mail! (Friday's)

William P., same goes for your package of goodies.
Jay

Antracith · Oct 31, 2008

I got my three heatsinks today, looks very nice. Thank you very much Jay!

I also got my diodes. My hosts were shipped from dx today.

Now I only need driver and aixiz module...

jayrob · Oct 31, 2008

Your welcome! Enjoy that building project...

specledx2, your 4171/AixiZ heatsinks will be in today's mail. (Friday)
Jay

jayrob · Nov 1, 2008

GeneralSpecific, your 3405/AixiZ heatsinks will be in Monday's mail.

daguin, same goes for your 4171/AixiZ...
Jay

GeneralSpecific · Nov 3, 2008

jayrob said:
GeneralSpecific, your 3405/AixiZ heatsinks will be in Monday's mail.

daguin, same goes for your 4171/AixiZ...
Jay

hooray!

kernelpanic · Nov 6, 2008

jayrob said:
kernelpanic, your 3405/AixiZ heatsinks will be in tomorrow's mail! (Friday's)
Jay

Received them the other day. They are beautiful as before. Thanks!

cheers,
kernelpanic

jayrob · Nov 6, 2008

Good to know they got there... Thanks!

Pat G., your heatsink will be in today's mail. (Thursday)
Jay

Bearded_Galaxy · Nov 9, 2008

jayrob said:
[quote author=Bearded_Galaxy link=1202452073/420#439 date=1221456404]Also, using the sku.4171, you could just use a rechargeable lithium 18650 battery (3.6V) if you're planning on using a FlexDrive driver, and that'll do just fine, as well as be rechargeable.

The 4171 host will fit an unprotected 17670 if you want a single 3.6 volt battery. You will need a FlexDrive for this configuration. The protected 17670 is a little too tight at the end where the protection circuit is...

Ace82, I got your order done and will have it in tomorrow's mail! (Monday)

SilentDawn, yours too.
Jay[/quote]
Since the FlexDrive won't operate at less than 2.5V, and most protected cells have the minimum cut off voltage at 2.5V, is there a real need for the protection circuit? Or is the risk too great, and I should just put a 1N4001 diode in series with the battery so the FlexDrive will cut off when the battery's around 3.1V (2.5V delivered to the driver)? Would there be any adverse effects to the second option, other than a shorter effective battery life? And about how much shorter would it really be? 2%? 10%? 25%?

jayrob · Nov 9, 2008

Those are good questions... but questions that cannot be answered unless you try it. I don't know the precise drop out of the FlexDrive. Only what is stated in the instructions.

I would say that the Silicon diode will not lessen the run time too much. Safer to use it. That way, you have a choice of the unprotected 17670, or 2 X 3.0 volt lithium batteries as well!

Jay

jayrob · Nov 10, 2008

daguin, your 3405/AixiZ and the two custom heatsinks will be in today's mail! (Monday)
Jay

daguin · Nov 10, 2008

jayrob said:
daguin, your 3405/AixiZ and the two custom heatsinks will be in today's mail! (Monday)
Jay

Thanks. I need to get the 300mW mistake back into a host

IgorT's lenses can't be too far away, can they?

Peace,
dave

Antracith · Nov 17, 2008

I need 4 more heatsinks Rob. It is the same heatsink as SKU 46 from DX but the base of the heatsink needs to be slightly smaller. Could you do that? After your answer I will send an order with exact specs.

I found a very nice host that is pretty similar to SKU 46 but much nicer imo. Feels less "cheap"

Thanx
/Antracith

jayrob · Nov 17, 2008

Antracith, no problem... PM sent.

Robert N., just to let you know that your 4171/AixiZ heatsinks will be in today's mail. (Monday)
Jay

jayrob · Nov 19, 2008

Adrain, your 4171/AixiZ heatsink is mailing today. (Wednesday)
Jay

ch053n · Nov 20, 2008

So you're into helicopters ?

well, so do i.

How much do i have to pay for a heatsink for mxdl aizix module ?

Im in a bit hurry atm so i dont got the time to read whole thread ... sorry about that

EDIT: well, .. it seems 27 dollars ..

FS: MXDL Custom Machined Heatsinks

chopper

0

jayrob

0

Antracith

0

jayrob

0

jayrob

0

GeneralSpecific

0

kernelpanic

0

jayrob

0

Bearded_Galaxy

0

jayrob

0

jayrob

0

daguin

0

Antracith

0

jayrob

0

jayrob

0

ch053n

0

Online statistics

Forum statistics

Share this page

FS: ***MXDL Custom Machined Heatsinks***

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

0

FS: MXDL Custom Machined Heatsinks