LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
FS: ***MXDL Custom Machined Heatsinks***
- Thread starter jayrob
- Start date
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
Thanks for the rep guys!
el-taco, yes 60 grit would be fine. It shouldn't need much... Probably just some sanding around the set screw area. The aluminum gets a little 'pushed out' when the drill bit punches through.
Jay
el-taco, yes 60 grit would be fine. It shouldn't need much... Probably just some sanding around the set screw area. The aluminum gets a little 'pushed out' when the drill bit punches through.
Jay
Zom-B
0
- Joined
- Mar 25, 2008
- Messages
- 895
- Points
- 28
:-? Mine was pre sanded, ready for action when i received it
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
el-taco said:
Hmmm.... this is the first I have heard of this. I use the same drill bit. I have heard (and experienced) that sometimes the module will start to slide in, but stop at the set screw area.
Are you using a module from AixiZ?
Jay
daguin
0
- Joined
- Mar 29, 2008
- Messages
- 15,989
- Points
- 113
Hmmm.... this is the first I have heard of this. I use the same drill bit. I have heard (and experienced) that sometimes the module will start to slide in, but stop at the set screw area.jayrob said:
Are you using a module from AixiZ?
Jay[/quote]
AixiZ = .466 in. (11.85mm)
Sure = .472 (11.99mm)
I don't have a DX module here
Peace,
dave
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
Good information Dave! Thanks...
That's it then. The heatsinks are fit for AixiZ (or DX) module. I have tried the DX, and they are the same size as the AixiZ. The Sure module is too big...
Jay
That's it then. The heatsinks are fit for AixiZ (or DX) module. I have tried the DX, and they are the same size as the AixiZ. The Sure module is too big...
Jay
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
I use the same drill bit to bore out the center, so the size of the hole is exact. If the module does not even start to slide into the heatsink, then it is either a freak AixiZ module, or it is not an AixiZ module. It's a good thing that AixiZ modules are cheap! You can get one at Stonetek.org, or if you want a 10 pack, AixiZ sells them on e-bay...
Spyderz20x6, your sku 46 heatsink and o-ring will be in tomorrow's mail! (Monday)
Jay
Spyderz20x6, your sku 46 heatsink and o-ring will be in tomorrow's mail! (Monday)
Jay
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
climbak, just to let you know that since I got your heatsinks done, I'll be dropping them at the Post Office today (Tuesday), instead of tomorrow...
Jay
Jay
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
WackBag, your heatsink is being shipped today. (Wednesday)
Jay
Jay
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
ckpcw, your heatsinks are being shipped today. (Thursday)
Jay
Jay
- Joined
- Aug 26, 2008
- Messages
- 38
- Points
- 0
PM sent for order. 
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
JaxSmirkingRevenge, your heatsink will be in tomorrow's mail. (Tuesday)
thesk8nmidget, yours too! And your piece of mirror...
Jay
thesk8nmidget, yours too! And your piece of mirror...
Jay
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
LRMNmeyer, your sku 46 heatsink and o-ring will be in Monday's mail...
Jay
Jay
