Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: Full Colour Driver Extension for the White Fusion kit

FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
Ok so its rolling now! Parts on the way. :)

I've added a new max current to the list: 695mA. Flaminpyro, netwave, TheGr8Revealing, and anyone else can now change their values from 499mA to 695mA if you need it, let me know. I don't recommend this high current on any of the other channels than the green though.

I highly recommend connecting three 1N4001-1N4007 diodes in series with the green module to increase the forward voltage so it matches the violet diode somewhat. This will keep excess heat off of the driver. Ask if you want some diodes when you order.

Speaking of ordering, I have now reseted the order's-list and will now accept your orders, I have 15 drivers available for this run. Of course, all of you who are on the interest-list have top priory (so only 2 more drivers without someones name on them). Anyone who are on the interest-list that have lost interest let me know!

So, anyway, please make your orders now! Any questions or anything let me know.
 





Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
OK you have me down for 5 each drivers thats good but I do want the higher current setting for the green, Thanks ;)
 
FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
Maybe a month, give or take a few weeks... It also depends on how far back in the line you are, right now Flaminpyro is first in line with his 5 drivers. You, as well as all the others in the interest-list still haven't confirmed that you still want to order! So the sooner you confirm to me either here or via pm, the hinger priority you will have, and the sooner your driver will be ready.
 
tysonc1979

tysonc1979

0
Joined
Feb 21, 2009
Messages
231
Points
18
I will still take my 2 drivers but i would like the green to be the new 695ma setting if i can and also can you add 2 insulation kits to my order
 
DjHeadie

DjHeadie

0
Joined
Apr 12, 2010
Messages
279
Points
0
FireMyLaser said:
Maybe a month, give or take a few weeks... It also depends on how far back in the line you are, right now Flaminpyro is first in line with his 5 drivers. You, as well as all the others in the interest-list still haven't confirmed that you still want to order! So the sooner you confirm to me either here or via pm, the hinger priority you will have, and the sooner your driver will be ready.
Click to expand...

i still want mine! real bad.
 
H

hydrogenman15

0
Joined
Feb 18, 2008
Messages
733
Points
18
FireMyLaser said:
Maybe a month, give or take a few weeks... It also depends on how far back in the line you are, right now Flaminpyro is first in line with his 5 drivers. You, as well as all the others in the interest-list still haven't confirmed that you still want to order! So the sooner you confirm to me either here or via pm, the hinger priority you will have, and the sooner your driver will be ready.
Click to expand...

I'm still in..

--hydro15
 
TheGr8Revealing

TheGr8Revealing

0
Joined
May 7, 2008
Messages
545
Points
0
Here is my update: I would like Red @ 391mA, Green @ 695mA, and Violet @ 391mA. Oh, and I would also like the 3pc insulation pads + bushings.

Thanks!

Edit: What do I have to do to be moved from the "interest list" to the 2nd round order list?
 
Last edited:
FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
TheGr8Revealing said:
Edit: What do I have to do to be moved from the "interest list" to the 2nd round order list?
Click to expand...
No that's fine, you just confimed that you still want to buy one. Added you to the orders list. :yh:


Oh, btw folks, I'm pretty sure that this will work excellent with a 445nm diode, I'm going to try it as soon as I get one!
 
You must log in or register to reply here.




Top