Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: Full Colour Driver Extension for the White Fusion kit

FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
For the next batch I will make one or two new max current settings between 450 and 700mA, please post in this thread which new currents you wish to have, and I will try to include them in the list of max currents.
 





Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
I have seen some green modules suck up 650-700mA so yes I would like to see a option for 700ma for the green driver, Thanks !

Peace All...



FireMyLaser said:
For the next batch I will make one or two new max current settings between 450 and 700mA, please post in this thread which new currents you wish to have, and I will try to include them in the list of max currents.
Click to expand...
 
FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
Ok, noted. I won't be able to please everybody so I will probably pick an average current setting based on your requests.

Btw those who have bought the driver before, how was the idle current for your green module(s), too high/low or just good as it is?

TheGr8Revealing said:
Awesome. Are you still looking for just one more purchase to start the next batch?
Click to expand...
That's right.
 
TheGr8Revealing

TheGr8Revealing

0
Joined
May 7, 2008
Messages
545
Points
0
Ok. I am in for 1 Full Color Driver Extension. I would like Red @ 391mA, Green @ 500-700mA, and Violet @ 391mA. Oh, and I would also like the 3pc insulation pads + bushings. As well as buttons. PM me for payment proceedings?
 
Last edited:
FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
I added you to the list. Now we are up to 11 drivers, I think I will make a batch of 15 total. It will take a while before it's ready, maybe a few months. As usual, I will not take any payments until the driver has been made and tested.
 
DjHeadie

DjHeadie

0
Joined
Apr 12, 2010
Messages
279
Points
0
FireMyLaser said:
I added you to the list. Now we are up to 11 drivers, I think I will make a batch of 15 total. It will take a while before it's ready, maybe a few months. As usual, I will not take any payments until the driver has been made and tested.
Click to expand...

so so excited.
 
FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
BTW DjH, is this right: R391 G367 V449?

To me 367mA for the green vs. 499mA of violet doesn't add up at all.
 
H

hydrogenman15

0
Joined
Feb 18, 2008
Messages
733
Points
18
Put me down for one of your drivers.

Red:391mA's
Green:265mA's
violet:208mA's

Insulation/bushings for regulators and wires.

--Hydro15
 
Flaminpyro

Flaminpyro

0
Joined
May 4, 2009
Messages
5,443
Points
113
At least 600ma for the green !

The idel current was ok all of mine could have been less, when in black marker I can still see colors very faintly but I'm not complaining.




FireMyLaser said:
Ok, noted. I won't be able to please everybody so I will probably pick an average current setting based on your requests.

Btw those who have bought the driver before, how was the idle current for your green module(s), too high/low or just good as it is?


That's right.
Click to expand...
 
DjHeadie

DjHeadie

0
Joined
Apr 12, 2010
Messages
279
Points
0
FireMyLaser said:
BTW DjH, is this right: R391 G367 V449?

To me 367mA for the green vs. 499mA of violet doesn't add up at all.
Click to expand...


quite honestly i think that 499mA across the board would be perfect, ive been playing too much with the diodes ive had on hand and have decided to start fresh for every component on this build, and keep some of these weaker modules in hosts. when i had listed off those currents i had a weaker v diode that wasnt capable of putting out nearly the type of mW as most others'

sorry for the constant mind changing flamin, just let me know when they are ready, and payment info!
 
Last edited:
FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
I'm slightly confused... do you want all to be 449mA?

hydrogenman15 said:
Put me down for one of your drivers.

Red:391mA's
Green:265mA's
violet:208mA's

Insulation/bushings for regulators and wires.

--Hydro15
Click to expand...

I added you to the list, but are you sure about just 265mA for the green?
 
DjHeadie

DjHeadie

0
Joined
Apr 12, 2010
Messages
279
Points
0
FireMyLaser said:
I'm slightly confused... do you want all to be 449mA?



I added you to the list, but are you sure about just 265mA for the green?
Click to expand...

ok. sorry for ALL the confusion.

i devoted an hour or so to figuring out what the modules i have will require.

i would like my red at 350mA
the v i would like to be at 309mA
and the green i would like at 449, i have a few diodes and can alter this as i need to.

sorry again for the confusion, this is my final (hopefully) unless it doesnt make sense to you ...?
 
FireMyLaser

FireMyLaser

0
Joined
Jan 12, 2008
Messages
3,290
Points
83
OK, updated. Bare in mind that there will be time (soon) when I collect all the parts, and by then I can no longer change your requests. So please make up your mind while you still can.
 
H

hydrogenman15

0
Joined
Feb 18, 2008
Messages
733
Points
18
FireMyLaser said:
I added you to the list, but are you sure about just 265mA for the green?
Click to expand...

Its strange right? I was measuring the output of my o-like 50mW green and the current it was drawing and it was only taking 256mA's.:thinking:
I think it could be the driver or something. I'll try it with a DDL circuit just to make sure.

****EDIT****
Just tested with a ddl driver with the DDL circuit at 250mA's and it put out 50mW's. So it should do just fine at a max of 265mA's. :)
--Hydro15
 
Last edited:
Cheech

Cheech

0
Joined
Mar 29, 2010
Messages
398
Points
28
Put me down for 1 driver with old max currents and buttons, pads, wires ect, I will DMM myself.
Thanks and awsome.
 
You must log in or register to reply here.




Top