FS: 405-G-1 Glass Lens Mod - 31% Increase vs AixiZ!

Kenom · May 15, 2009

ahh. well hopefully it sells on ebay.

jayrob · May 16, 2009

Just list it in the BST section here Ken!

405-G-1 glass lens mods that shipped today: (Saturday)

pseudolobster (with other items)
IanE (with other items)

:thanks:
Jay

charliebruce · May 17, 2009

Mine arrived either yesterday or Friday (not sure which) and I must say, it's amazing how much power increased by! From about 93mW with Acryllic, now my PHR peaks at over 120mW, which works out at a 29% increase. I haven't had a chance to try it out with my SF-AW210s, but I will probably put one of those in a host (the same as your DIY green host) and custom heatsink, and have around 300mW in a handheld! (Presuming the LavaDrive can provide the voltage)

I can get some nice pics and long-range burning done some time around Wednesday, but for now a + rep will have to suffice...

jayrob · May 17, 2009

Thanks for posting back Charlie!

I was just wondering yesterday if you got your 405-G-1 glass lens yet...

Yes, the FlexDrive will handle the BDR 8X diodes (which have a higher forward voltage), up to about 300mA's max per Dr. Lava. At that current, an 8X will give you about 400mW's (405-G-1 lens) depending on diode efficiency!

I have a FlexDrive build in a Pocket Mini/BDR set at 292mA's giving 375mW's with my glass lens mod. My diode is a low efficiency diode, but maybe it will last longer! (I hope)
Jay

jayrob · May 18, 2009

A couple of more 405-G-1 glass lens modifications shipping today. (Monday)

ShawnF (and other item)
JonR (and other items)

:thanks:
Jay

jayrob · May 19, 2009

TheGr8Revealing, just to let you know that your 405-G-1 glass lens modification got shipped today. (Tuesday)

Enjoy!

Jay

Traveller · May 21, 2009

WRM said:
My IgorT 6x blu was putting out 176.1mW. With your lens swap, it now puts out 225.6mW

176... "point one"?!?

Damn, what kind of LPM do you have that measures down to a tenth of a mW??? Now how cool is that

Traveller · May 23, 2009

David and Goliath...

Now that I have two proper BRs I was finally able to view both the 405-G-1 and standard acrylic AixiZ side by side. This proves that the 405-G-1 doesn't add anything new to the so-called diode "splash", but simply magnifies it. No one saw it before because no one took the time to look...

(... 'cause they were too busy burning stuff, as it should be

)

(L) IgorT 6X @199mW w/AixiZ acryllic and (R) Daguin 6X w/405-G-1 @236mW

Spyderz20x6 · May 23, 2009

Traveller said:
David and Goliath...

Now that I have two properl BRs I was finally able to view both the 405-G-1 and standard acrylic AixiZ side by side. This proves that the 405-G-1 doesn't add anything new to the so-called diode "splash", but simply magnifies it. No one saw it before because no one took the time to look...

(... 'cause they were too busy burning stuff, as it should be )

(L) IgorT 6X @199mW w/AixiZ acryllic and (R) Daguin 6X w/405-G-1 @236mW

Hmm...

How come we did not see this with an acrylic lens?

Traveller · May 23, 2009

Spyderz20x6 said:
Hmm... How come we did not see this with an acrylic lens?

Well now you've got me... :thinking:

I'm of course assuming Igor used a standard acrylic... but I haven't "verified" it. you know how Igor is with his super-cleaning, so I didn't want to remove the lens...

I will say this; you have to have it perfectly focused on a nearby surface to see the rectangle. Once you project it more than a meter away the rectangle is no longer visible...

FrancoRob · May 23, 2009

So you have to focus them on a black anodized-sanded metal plate, otherwise they will burn everything....:tinfoil:

Elektrotechniker · May 23, 2009

I don't know, maybe 55$ is way too much for a small lens..

Spyderz20x6 · May 23, 2009

Silvershot said:
I don't know, maybe 55$ is way too much for a small lens..

You are not a true laser enthusiast.

Get 'em boys!

Crossfire · May 26, 2009

Silvershot said:
I don't know, maybe 55$ is way too much for a small lens..

I disagree. In fact, I'd like to purchase one for my Kryton. These do fit the first-generation Kryton, correct?

jayrob · May 26, 2009

Absolutely!

With a Kryton, I recommend getting my Kryton EzFocus adapter as well...

This lens will burn your fingers bad! And the Kryton is difficult to focus unless you have this:

* 405-G-1 glass lens mod - $55
* Kryton EzFocus adapter (knurled/1st run smooth barrel Kryton) - $24
* Shipping - $3

Sending PM...

:thanks:
Jay

jayrob · May 26, 2009

405-G-1 glass lens modifications shipping today: (Tuesday)

Rolfiboy (and other items)
Crossfire (and other item)

:thanks:
Jay

FS: 405-G-1 Glass Lens Mod - 31% Increase vs AixiZ!

Kenom

0

jayrob

0

charliebruce

0

jayrob

0

jayrob

0

jayrob

0

Traveller

0

Traveller

0

Attachments

Spyderz20x6

0

Traveller

0

FrancoRob

0

Elektrotechniker

0

Spyderz20x6

0

Crossfire

0

jayrob

0

jayrob

0

Online statistics

Forum statistics

Share this page