FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... - Page 17

bhwollen · 08-05-2011, 08:30 AM

Spam!

LaZeRz · 08-05-2011, 11:24 AM

LOL, that comes in place at number 2 on my list of the weirdest spams..

InfinitusEquitas · 08-23-2011, 09:46 PM

@Jay

I picked up what I suspect is one of your assembled kits off of another member here.

Quick question, seems to run more or less equally well off of one 18650 or 2x 16340 or 2x 18350 batteries.

What is driver supposed to work with best?

jayrob · 08-23-2011, 09:52 PM

It depends on what driver is installed...

Many of my kits are not purchased with the 'Hot' option shown in the first post. So it is possible that the person you bought it from, had a linear driver in there. Or some other driver rather than the FlexDrive shown here in this thread.

If it's a Jib driver, then you want 2 X Li-Ion's. If it's a FlexDrive, then you want a single 18650...

InfinitusEquitas · 08-23-2011, 10:08 PM

If it's a flex drive, would using two 18350 batteries damage it or just cause it to produce more heat?

jayrob · 08-23-2011, 10:12 PM

Quote:

Originally Posted by InfinitusEquitas

If it's a flex drive, would using two 18350 batteries damage it or just cause it to produce more heat?

It would damage it if it is much more than 5.5 volts total input...

See documentation here:
http://hacylon.case.edu/ebay/laser_d..._V5_manual.pdf

InfinitusEquitas · 08-23-2011, 10:22 PM

Quote:

Originally Posted by jayrob

It would damage it if it is much more than 5.5 volts total input...

See documentation here:
http://hacylon.case.edu/ebay/laser_d..._V5_manual.pdf

Thanks for the info.

Although now I'm more confused... driver already handled 8.4v, two freshly charged 18350 batteries each at 4.2v just fine, with about 10 minutes of total run time off of those batteries.

I thought it was a linear driver... so originally used the 18350 batteries. Only found it to work almost equally as well with a 18650 battery, when playing around with the lpm last night out of curiosity.

I have another c6 build which is a linear jib and while it does ~1.2W with two 3.7v batteries, it puts out a <100mW with one 18650 battery.

Might just have to crack this laser open to see what's in there.

jayrob · 08-23-2011, 10:52 PM

I would be curious to know if it is a FlexDrive...

Please post back and let me know!

It wouldn't surprise me, because they seem to be such an amazing driver in such a tiny package.

If it did hold up under that extra input voltage, I still would not recommend continuing it. I'd go with an 18650 supply if it is a FlexDrive...

InfinitusEquitas · 08-24-2011, 01:42 AM

Actually just heard back from LockSmithaArmy.

He doesn't know what driver is in there either, says you built it

I sounds like he used two 16340 batteries, and also didn't notice any difference vs using one 18650.

Will LPM this laser as soon as batteries charge with both 18650 and 18350 batteries.

jayrob · 08-24-2011, 01:44 AM

If I put the driver in there, then it is a FlexDrive...

InfinitusEquitas · 08-24-2011, 04:25 AM

Well... My luck ran out

At least got an interesting experience out of it. As I was twisting on the tailcap the laser lased... even though the tailcap was in the off position. Once I twisted it on, and clicked it, that was it.

Obviously didn't lpm it, but it did leave a mark on my white wall, 3 feet away. Last laser to do that was an 800mW 405nm.

I opened it up, slight smell of burned electronics. Hopefully the diode is fine and I just killed the driver.

I guess before the driver was able to handle the increased voltage.. but not with the batteries freshly charged.

jayrob · 08-24-2011, 04:32 AM

Man that's a bummer...

You might post your experience in this thread for others to learn from it:
Learn From Mistakes That Can Happen To Anybody...

InfinitusEquitas · 08-24-2011, 05:57 AM

I'll post in that thread tomorrow.

I knew going in that there was risk I could kill the driver, but even so, disappointing. I was really hoping I found a true freak laser.

trilokkanna · 10-18-2011, 10:40 PM

Helllo i want to order something from you. how do i do it.

jayrob · 10-18-2011, 11:15 PM

Quote:

Originally Posted by trilokkanna

Helllo i want to order something from you. how do i do it.

Just message me!

Sending PM...

Dr_Evil · 12-30-2011, 01:28 AM

Do you think you could make this with a copper press fit HS for 3.8mm diodes? I'd like to get one for a 510nm build.

jayrob · 12-30-2011, 04:08 AM

Quote:

Originally Posted by Dr_Evil

Do you think you could make this with a copper press fit HS for 3.8mm diodes? I'd like to get one for a 510nm build.

I could if I had a 3.8 diode on hand...

To get the right fit, there would be a little 'trial and error' with some test material. Very close tolerance for a diode press fit.

Dr_Evil · 12-30-2011, 07:05 AM

The best bet would be to find a laptop CD/DVD drive or a member that has a dead diode. I can purchase one and have it sent to you. I justdon't know which models have 3.8mm diodes though. The last one I took apart didn't have a typical red/IR can style diode. It was some other wierd thing I've never seen before. The BR diode was a 5.6 that was flattened on two sides.

jayrob · 12-30-2011, 07:46 AM

A while back I saw that somebody was selling modules for those smaller diodes. In fact I bought one of the modules that I have never used yet.

I think it was Flaminpyro. You might just check with him and see...

tuefelhunden1371 · 03-01-2012, 04:35 PM

Patiently awaiting my kit.

marianin · 05-03-2012, 01:33 AM

you have the basic kit available???

jayrob · 05-03-2012, 04:02 AM

Quote:

Originally Posted by marianin

you have the basic kit available???

Yes, available!

Just send me a PM...

nztdm · 06-27-2012, 10:11 AM

Hello

Im a little new to the laser scene, and I want to know what items would be recommended to be bought from your list.

I have a "445nm M140 Diode In Module With Leads & Three Element Glass Lens" from DTR. vvvvvvv
https://sites.google.com/site/dtrlpf...45-m140-didoes
( $64 option on that page )

And i also have 2 x 4000mAh Ultrafire protected 18650 batteries.

I would would the 1.5A output so the maxed option would be best dont you think?

So, what items would I want to get from your list?

jayrob · 06-27-2012, 03:41 PM

Quote:

Originally Posted by nztdm

Hello

Im a little new to the laser scene, and I want to know what items would be recommended to be bought from your list.

I have a "445nm M140 Diode In Module With Leads & Three Element Glass Lens" from DTR. vvvvvvv
https://sites.google.com/site/dtrlpf...45-m140-didoes
( $64 option on that page )

And i also have 2 x 4000mAh Ultrafire protected 18650 batteries.

I would would the 1.5A output so the maxed option would be best dont you think?

So, what items would I want to get from your list?

Should be a good set up at 1.5 Amps...

With that diode and lens, it should be about 1.3 Watts minimum.

It will be an easy assembly. You will just need to connect your diode leads, to my driver leads. ('Hot' option kit)

I'll message you with information, as well as a link to eye protection in case you do not already have goggles...

Billiam · 10-16-2012, 02:01 PM

Hey man, Is there any idea on when you'll be posting my kit out?

08-05-2011, 08:30 AM	#401
bhwollen Banned Join Date: Jan 2011 Location: The bay Posts: 1,681 Rep Power: 0	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... Spam!

08-05-2011, 11:24 AM	#402
LaZeRz Class 3R Laser Join Date: Feb 2011 Location: Sydney, Australia Posts: 2,443 Rep Power: 91	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... LOL, that comes in place at number 2 on my list of the weirdest spams.. __________________ Stupid Australian Laser Laws.... Damn you customs How to remove the PCB from protected cells My Collection Of Beamshots and Laser Related pics! Feel free to message me for any help/advice

08-23-2011, 09:46 PM	#403
InfinitusEquitas Class 4 Laser Join Date: Mar 2011 Location: 20 Minutes from NYC. Posts: 11,025 Rep Power: 310	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... @Jay I picked up what I suspect is one of your assembled kits off of another member here. Quick question, seems to run more or less equally well off of one 18650 or 2x 16340 or 2x 18350 batteries. What is driver supposed to work with best? __________________ REQUIRED READING; Sam's Laser FAQs STILL HAVE QUESTIONS? SEARCH FIRST ASK QUESTIONS LATER! LPF Search Tips Link: SHIPPING TIMELINES BY COMPANIES AND REGIONS Link: REVIEWS DO'S and DON'TS YES YOU DO NEED TO GET GOGGLES! YOU ONLY GET TWO EYES, SO GET SOME SAFETY GOGGLES NOW! OEM Laser Systems Laser Safety Industries Thor Labs Suvival Laser Better Than Nothing: Cheap Safety Goggles Last edited by InfinitusEquitas; 08-23-2011 at 09:47 PM.

08-23-2011, 09:52 PM	#404
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 9,446 Rep Power: 428	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... It depends on what driver is installed... Many of my kits are not purchased with the 'Hot' option shown in the first post. So it is possible that the person you bought it from, had a linear driver in there. Or some other driver rather than the FlexDrive shown here in this thread. If it's a Jib driver, then you want 2 X Li-Ion's. If it's a FlexDrive, then you want a single 18650... __________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see! * FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too!

08-23-2011, 10:08 PM	#405
InfinitusEquitas Class 4 Laser Join Date: Mar 2011 Location: 20 Minutes from NYC. Posts: 11,025 Rep Power: 310	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... If it's a flex drive, would using two 18350 batteries damage it or just cause it to produce more heat? __________________ REQUIRED READING; Sam's Laser FAQs STILL HAVE QUESTIONS? SEARCH FIRST ASK QUESTIONS LATER! LPF Search Tips Link: SHIPPING TIMELINES BY COMPANIES AND REGIONS Link: REVIEWS DO'S and DON'TS YES YOU DO NEED TO GET GOGGLES! YOU ONLY GET TWO EYES, SO GET SOME SAFETY GOGGLES NOW! OEM Laser Systems Laser Safety Industries Thor Labs Suvival Laser Better Than Nothing: Cheap Safety Goggles

08-23-2011, 10:52 PM	#408
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 9,446 Rep Power: 428	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... I would be curious to know if it is a FlexDrive... Please post back and let me know! It wouldn't surprise me, because they seem to be such an amazing driver in such a tiny package. If it did hold up under that extra input voltage, I still would not recommend continuing it. I'd go with an 18650 supply if it is a FlexDrive... __________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see! * FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too!

08-24-2011, 01:42 AM	#409
InfinitusEquitas Class 4 Laser Join Date: Mar 2011 Location: 20 Minutes from NYC. Posts: 11,025 Rep Power: 310	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... Actually just heard back from LockSmithaArmy. He doesn't know what driver is in there either, says you built it I sounds like he used two 16340 batteries, and also didn't notice any difference vs using one 18650. Will LPM this laser as soon as batteries charge with both 18650 and 18350 batteries. __________________ REQUIRED READING; Sam's Laser FAQs STILL HAVE QUESTIONS? SEARCH FIRST ASK QUESTIONS LATER! LPF Search Tips Link: SHIPPING TIMELINES BY COMPANIES AND REGIONS Link: REVIEWS DO'S and DON'TS YES YOU DO NEED TO GET GOGGLES! YOU ONLY GET TWO EYES, SO GET SOME SAFETY GOGGLES NOW! OEM Laser Systems Laser Safety Industries Thor Labs Suvival Laser Better Than Nothing: Cheap Safety Goggles

08-24-2011, 01:44 AM	#410
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 9,446 Rep Power: 428	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... If I put the driver in there, then it is a FlexDrive... __________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see! * FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too!

08-24-2011, 04:25 AM	#411
InfinitusEquitas Class 4 Laser Join Date: Mar 2011 Location: 20 Minutes from NYC. Posts: 11,025 Rep Power: 310	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... Well... My luck ran out At least got an interesting experience out of it. As I was twisting on the tailcap the laser lased... even though the tailcap was in the off position. Once I twisted it on, and clicked it, that was it. Obviously didn't lpm it, but it did leave a mark on my white wall, 3 feet away. Last laser to do that was an 800mW 405nm. I opened it up, slight smell of burned electronics. Hopefully the diode is fine and I just killed the driver. I guess before the driver was able to handle the increased voltage.. but not with the batteries freshly charged. __________________ REQUIRED READING; Sam's Laser FAQs STILL HAVE QUESTIONS? SEARCH FIRST ASK QUESTIONS LATER! LPF Search Tips Link: SHIPPING TIMELINES BY COMPANIES AND REGIONS Link: REVIEWS DO'S and DON'TS YES YOU DO NEED TO GET GOGGLES! YOU ONLY GET TWO EYES, SO GET SOME SAFETY GOGGLES NOW! OEM Laser Systems Laser Safety Industries Thor Labs Suvival Laser Better Than Nothing: Cheap Safety Goggles

08-24-2011, 04:32 AM	#412
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 9,446 Rep Power: 428	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... Man that's a bummer... You might post your experience in this thread for others to learn from it: Learn From Mistakes That Can Happen To Anybody... __________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see! * FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too!

08-24-2011, 05:57 AM	#413
InfinitusEquitas Class 4 Laser Join Date: Mar 2011 Location: 20 Minutes from NYC. Posts: 11,025 Rep Power: 310	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... I'll post in that thread tomorrow. I knew going in that there was risk I could kill the driver, but even so, disappointing. I was really hoping I found a true freak laser. __________________ REQUIRED READING; Sam's Laser FAQs STILL HAVE QUESTIONS? SEARCH FIRST ASK QUESTIONS LATER! LPF Search Tips Link: SHIPPING TIMELINES BY COMPANIES AND REGIONS Link: REVIEWS DO'S and DON'TS YES YOU DO NEED TO GET GOGGLES! YOU ONLY GET TWO EYES, SO GET SOME SAFETY GOGGLES NOW! OEM Laser Systems Laser Safety Industries Thor Labs Suvival Laser Better Than Nothing: Cheap Safety Goggles

10-18-2011, 10:40 PM	#414
trilokkanna Junior Member Join Date: Oct 2011 Posts: 1 Rep Power: 0	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... Helllo i want to order something from you. how do i do it.

12-30-2011, 01:28 AM	#416
Dr_Evil Class 3R Laser Join Date: Feb 2008 Location: Dalzell, SC Posts: 1,096 Rep Power: 47	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... Do you think you could make this with a copper press fit HS for 3.8mm diodes? I'd like to get one for a 510nm build. __________________ 645 to 660 - Z-bolt BTP-8E, jayrob 18650 w/LOC 225mW/380mA 635 - Z-bolt BTE-4S 632.8 - 10mW HeNe 589 - PGL-3-M 10mW 543 - GreeNe 532 - Optotronics RPL-260, Optotronics Pen ~20mW 514 - Argon SL 488 - Novalux 473 - Lasever LSR473HD-80 - 107mW peak 450 - JayRob 18650 w/Osram PL450B 445 - JayRob 18650 370mW/500mA 405 - IgorT build, Old Leadlight that Drlava transformed (33mW), 12x in a JayRob 18650 host 430mW/350mA Multi - 2214-25MLUP ArIon

12-30-2011, 07:05 AM	#418
Dr_Evil Class 3R Laser Join Date: Feb 2008 Location: Dalzell, SC Posts: 1,096 Rep Power: 47	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... The best bet would be to find a laptop CD/DVD drive or a member that has a dead diode. I can purchase one and have it sent to you. I justdon't know which models have 3.8mm diodes though. The last one I took apart didn't have a typical red/IR can style diode. It was some other wierd thing I've never seen before. The BR diode was a 5.6 that was flattened on two sides. __________________ 645 to 660 - Z-bolt BTP-8E, jayrob 18650 w/LOC 225mW/380mA 635 - Z-bolt BTE-4S 632.8 - 10mW HeNe 589 - PGL-3-M 10mW 543 - GreeNe 532 - Optotronics RPL-260, Optotronics Pen ~20mW 514 - Argon SL 488 - Novalux 473 - Lasever LSR473HD-80 - 107mW peak 450 - JayRob 18650 w/Osram PL450B 445 - JayRob 18650 370mW/500mA 405 - IgorT build, Old Leadlight that Drlava transformed (33mW), 12x in a JayRob 18650 host 430mW/350mA Multi - 2214-25MLUP ArIon

12-30-2011, 07:46 AM	#419
jayrob Class 4 Laser Join Date: Sep 2007 Location: Northern CA, U.S. Astrophotography! (Some of my Photos) Posts: 9,446 Rep Power: 428	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... A while back I saw that somebody was selling modules for those smaller diodes. In fact I bought one of the modules that I have never used yet. I think it was Flaminpyro. You might just check with him and see... __________________ Personal lasers: (just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8, Many DIY 445, red, blu-ray, green, 635, and 450 builds... Looking for a DIY kit? Take a look at some of my more popular kits linked in color... * FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic! * FS: New! 1000 Lumen XM-L U3 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see! * FS: Polished Stainless Steel Green Kit! Easy assembly in minutes! * FS: Maglite Monster Kits! FlexModP3! Gnarly... Click here for a list of my build kits! Projects and tutorials too!

03-01-2012, 04:35 PM	#420
tuefelhunden1371 Junior Member Join Date: Feb 2012 Location: Illinois Posts: 2 Rep Power: 0	Re: FS: 18650 Build Kit! Easy Assembly! Blu-ray or Red... Patiently awaiting my kit. Last edited by tuefelhunden1371; 03-01-2012 at 05:00 PM.

05-03-2012, 01:33 AM	#421
marianin Banned Join Date: Mar 2012 Location: MeXiCo ahuuuaaa¡¡¡¡ Posts: 173 Rep Power: 0	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... you have the basic kit available???

06-27-2012, 10:11 AM	#423
nztdm Class 1 Laser Join Date: Jun 2012 Location: New Zealand Posts: 56 Rep Power: 4	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... Hello Im a little new to the laser scene, and I want to know what items would be recommended to be bought from your list. I have a "445nm M140 Diode In Module With Leads & Three Element Glass Lens" from DTR. vvvvvvv https://sites.google.com/site/dtrlpf...45-m140-didoes ( $64 option on that page ) And i also have 2 x 4000mAh Ultrafire protected 18650 batteries. I would would the 1.5A output so the maxed option would be best dont you think? So, what items would I want to get from your list?

10-16-2012, 02:01 PM	#425
Billiam Class 2M Laser Join Date: Jun 2012 Location: Sydney, Australia Posts: 689 Rep Power: 23	Re: FS: 18650 Build Kit! Easy Assembly! 445nm, Blu-ray, or Red... Hey man, Is there any idea on when you'll be posting my kit out?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://laserpointerforums.com/f64/fs-18650-build-kit-easy-assembly-445nm-blu-ray-red-43857.html
Posted By	For	Type	Date
1W blue laser ? remarkably easy and dangerous	This thread	Refback	05-15-2013 07:41 AM
Search Results laser pointer	This thread	Refback	05-10-2013 03:50 AM
Search Results handheld hack	This thread	Refback	03-23-2013 10:17 AM
Search Results blue ray	This thread	Refback	01-18-2013 10:47 PM
Hack a Day ? Fresh hacks every day	This thread	Refback	01-18-2013 06:47 PM
Search Results laser	This thread	Refback	12-12-2012 03:44 AM
laser hacks	This thread	Refback	11-21-2012 10:36 PM
DIY: How To Build A 1W Burning Blue Laser Torch! - YouTube	This thread	Refback	11-02-2012 12:36 AM
Lasers & Goodies - Adam Caudill	This thread	Refback	06-24-2012 09:45 AM
Electronics-Lab.com Blog » 2010 » August	This thread	Refback	05-31-2012 04:51 PM
optics « Labrigger	This thread	Refback	04-25-2012 06:49 PM
Electronics-Lab.com Blog » Light	This thread	Refback	01-28-2012 12:10 AM
Search Results 18650 Hack a Day	This thread	Refback	01-06-2012 08:16 PM
1W laser bleu - remarquablement facile et dangereux	This thread	Refback	12-13-2011 08:07 PM
Electronics-Lab.com Blog » Blue Laser	This thread	Refback	11-18-2011 08:03 PM
1W a laser blu - notevolmente facile e pericoloso	This thread	Refback	10-25-2011 09:27 AM
Search Results laser pointer Hack a Day	This thread	Refback	08-28-2011 07:56 AM
1 Watt 445nm blue burning laser - YouTube	This thread	Refback	08-25-2011 09:09 PM
DIY: How To Build A 1W Burning Blue Laser Torch! - YouTube	This thread	Refback	08-13-2011 09:46 AM
Search Results 1W blue laser Hack a Day	This thread	Refback	07-22-2011 09:20 PM
‪DIY: How To Build A 1W Burning Blue Laser Torch!‬&rlm; - YouTube	This thread	Refback	07-14-2011 03:08 AM
Search Results flashlight Hack a Day	This thread	Refback	07-14-2011 01:32 AM
Search Results blu ray diode Hack a Day	This thread	Refback	07-12-2011 12:58 AM
YouTube - ‪boxmour1's Channel‬&rlm;	This thread	Refback	07-09-2011 08:21 AM
channelrhodopsin « Search Results « Labrigger	This thread	Refback	06-27-2011 03:39 PM
gadgets « Labrigger	This thread	Refback	06-25-2011 01:08 AM
YouTube - ‪1 Watt 445nm blue burning laser‬&rlm;	This thread	Refback	06-23-2011 10:29 AM
YouTube - ‪DIY: How To Build A 1W Burning Blue Laser Torch!‬&rlm;	This thread	Refback	05-19-2011 04:30 PM
Blue Laser \| Electronics articles	This thread	Refback	04-28-2011 02:25 PM
Search Results laser diode Hack a Day	This thread	Refback	04-23-2011 06:03 AM
Labrigger	This thread	Refback	04-21-2011 03:34 AM
laser cutting « Labrigger	This thread	Refback	04-11-2011 01:54 PM
Search Results Balloon Hack a Day	This thread	Refback	04-07-2011 11:27 PM
DIY: How To Build A 1W Burning Blue Laser Torch \| Electronics articles	This thread	Refback	03-31-2011 04:05 AM
1w - Hack a Day	This thread	Refback	03-30-2011 09:20 PM
?????????	This thread	Refback	03-28-2011 08:49 AM
Search Results blu ray laser Hack a Day	This thread	Refback	03-28-2011 01:42 AM
Search Results 1 watt laser Hack a Day	This thread	Refback	03-22-2011 11:01 AM
Search Results laser Hack a Day	This thread	Refback	03-22-2011 09:06 AM
Hack a Day	This thread	Refback	03-20-2011 08:22 PM
DIY lasers cutters for your CNC Mill - Lumenlab	This thread	Refback	03-20-2011 12:45 PM
Electronics-Lab.com Blog » Laser	This thread	Refback	03-17-2011 07:21 PM
Selvbygget laser :) - Norsk Freakforum	This thread	Refback	03-17-2011 02:29 PM
Search Results 1w laser Hack a Day	This thread	Refback	03-16-2011 05:05 AM
Electronics-Lab.com Blog » Blog Archive » DIY: How To Build A 1W Burning Blue Laser Torch	This thread	Refback	03-05-2011 09:14 PM
Search Results blue laser Hack a Day	This thread	Refback	03-04-2011 07:15 AM
electronics « Labrigger	This thread	Refback	03-01-2011 11:33 PM
Electronics-Lab.com Blog » Search Results » laser	This thread	Refback	03-01-2011 07:20 AM
Search Results laser flashlight Hack a Day	This thread	Refback	02-27-2011 01:24 AM
Hardware « Labrigger	This thread	Refback	02-24-2011 05:36 PM