Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

DTR's Laser Shop - Laser Diodes & More

Wolfman29

Wolfman29

0
Joined
Jan 14, 2011
Messages
3,816
Points
63
Re: DTR's Laser Shop

You're really charging quite a lot of money for those FlexDrives there... is it because they are out of stock again? :p
 





DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: DTR's Laser Shop

Wolfman29 said:
You're really charging quite a lot of money for those FlexDrives there... is it because they are out of stock again? :p
Click to expand...

These are not bare flexdrives. They are flexdrives that have leads soldered on, range resistors soldered and the current set. The bare drive costs $24 and there are $2 in PP fees on each and it costs $2 to ship it not to mention the occasional dead drivers that I eat. If you take that all into account I don't believe that $5 to $7 is too much to ask for the service if it saves you the hassle of soldering on your driver yourself. If you just want the bare driver see Flaminpryo he has them.;)
 
Wolfman29

Wolfman29

0
Joined
Jan 14, 2011
Messages
3,816
Points
63
Re: DTR's Laser Shop

Oh. Was unaware that they came resistor-less. Fair enough, all is accounted for!
 
rocket689

rocket689

0
Joined
Dec 17, 2010
Messages
1,144
Points
48
Re: DTR's Laser Shop

They don't come "resistorless" when unset. You have to solder the jumpers on the range resistors to set one of five current ranges.

However, the resistors that are soldered are the size of a pin head; a little too long with the soldering iron, and the resistors unsolder themselves from the board. It's a PITA getting them back in the right place; I would know :whistle: .

That price is is fair for a set-up flex. :)
 
Ra1nfade

Ra1nfade

0
Joined
Jan 27, 2011
Messages
701
Points
0
Re: DTR's Laser Shop

DTR, do you have any of your pressed diodes with the leads attached still in stock?
 
Ra1nfade

Ra1nfade

0
Joined
Jan 27, 2011
Messages
701
Points
0
Re: DTR's Laser Shop

Awesome man Thanks! You can expect an order from on friday then ;)

Would be sooner but I had to buy the ol' lady some tires unexpectedly...
 
Ra1nfade

Ra1nfade

0
Joined
Jan 27, 2011
Messages
701
Points
0
Re: DTR's Laser Shop

I got my diode today and it's getting ready to go into a project tomorrow, Thanks DTR :beer:
 
DarkSide

DarkSide

0
Joined
Mar 19, 2011
Messages
276
Points
0
Re: DTR's Laser Shop

The few bucks DTR charges to setup your driver,diode per spec is well worth it IMHO. Were all pretty fortunate to have a few resident experts who can offer this level of service, DTR has to be one the best.
 
Ra1nfade

Ra1nfade

0
Joined
Jan 27, 2011
Messages
701
Points
0
Re: DTR's Laser Shop

He's top notch for sure, my diode was all nice and wrapped and had nice silicone leads. :)
 
DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: DTR's Laser Shop

I am out at the moment. I do plan on getting more but you can get them as fast as I will have them through Kaidomain, DX or Lighthound(us based but expensive) directly.:beer:
 
B

bhwollen

0
Joined
Jan 13, 2011
Messages
1,681
Points
0
Re: DTR's Laser Shop

Thanks, I'll check lighthound because I need them soon.
 
DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: DTR's Laser Shop

I think Qumefox was offering them as well with some quality reworking done to them.:beer:
 
532 with Envy

532 with Envy

0
Joined
Jun 19, 2010
Messages
1,487
Points
63
Re: DTR's Laser Shop

:bumpit::bumpit:
Dropped PP for 2 445nm's and a battery.
Thanks for the great deals!:beer::beer:
 
You must log in or register to reply here.




Top