Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

DAoO LASERMASTER 2.2W Beast "NOT EVEN CLOSE" SCAM

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

There are many people that I've wished would die. I can probably think of 5 or 10 people I know in person that I would like to see dead. These are just wastes of space which cause more harm than good in the world.
In fact, there are some crack heads that live just two houses down from me which keep popping out kids and using up my taxes.......

Pent up anger is a waste of time.. Wishing somebody was dead from what you see
on the outside is also pretty silly. If you dont like something about a person, tell
them to their face and be done with it..

Either that or get past the sexual tension, and get yourself some crackhead :thinking:
 





Things

0
Joined
May 1, 2007
Messages
7,517
Points
0
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

Guys, with threads like these, load the tags up with keywords such as "scammer, lasermaster, hackforums" etc. Then whenever someone searches on google, they get a flood of scammer links :)
 
Last edited:
Joined
Nov 10, 2008
Messages
4,186
Points
63
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

lol @ the tags :crackup:. I add ripoff master and darkassh:)le
 
Last edited:

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

I got the unit rebuilt with the same driver and it peaks @ 1.1W.

p1017743.jpg
 
Last edited:
Joined
Nov 10, 2008
Messages
4,186
Points
63
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

I got the unit rebuilt with the same driver and it peaks @ 1.1W.

p1017743.jpg

What changes did you make? Did you use a new diode? Also, is the laser going to that pal who sent it to ya?
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

I rewired it with some nice pyro wire and added a new diode. That is about it..
 
Joined
Jan 2, 2009
Messages
11,800
Points
0
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

No need to wish people dead. My philosophy is that pay back is a bi*ch, and that they should stick around to suffer. We surround ourselves with the same kind of character we project. So all his friends will always be scum bags, drug addicts, and thieves. No honest person would associate with a dishonest person.

And I wouldnt expect that hacker forum to be full of moral individuals. There is all kinds of shady crap going on there. Tyler fits right in. They dont care if he is scamming people. Its common occurrence there. Plus, as been said, he is probably kicking back some funds to the forum.

Jordan you need to change the title to the thread. In order for Google to pick this thread it needs clear key words. I suggest " DAoO Lasermaster Scam / Another Dead Laser by DarkArmyofOne"
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

Just to make it clear the thread is not about the laser being dead. It is about what the laser is not. It was clearly a 1W laser sold as a 2.2W laser.;)

I will take a look at the title and see what I can do with it.:beer:
 
Joined
Jan 2, 2009
Messages
11,800
Points
0
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

I know that, but its also dead. When people see his name and the words scam, and dead laser they will read everything you wrote.
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Re: DAOO/LASERMASTER 2.2W Beast "NOT"

Just to make it clear the thread is not about the laser being dead. It is about what the laser is not. It was clearly a 1W laser sold as a 2.2W laser.;)

AND that it blew a diode at 1.1W, yes?

Were you able to figure that out?

Peace,
dave
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: DAoO LASERMASTER 2.2W Beast "NOT" SCAM

Looks like the wires to the diode became twisted and one popped off with intermittent contact killing the diode. Now how they twisted I can not be 100% sure. There may have originally been an o-ring in the head that was not there once it got shipped to me. But I put an the o-ring from the middle section in the head and it was enough to make me think it was a tight fit until I tried to focus it and notice the bar/dot started spinning. Red flag. So I took it back apart and added a small amount of adhesive to keep the heatsink form spinning again but not enough that it would not be removable with a little force.

So my guess is that it had an o-ring and it was somewhat snug but when the focus got tight the sink started spinning causing the wires to twist. But again this is all speculation which is why I put in there it is not about the unit being dead.

The customer did not know exactly why it died but he did know that one of his wires had come loose and originally asked if I could just rewire it.
 
Last edited:

LaZeRz

0
Joined
Feb 19, 2011
Messages
2,549
Points
63
Re: DAoO LASERMASTER 2.2W Beast "NOT" SCAM

To anyone from HF viewing this thread.

DONT BELIEVE THE CRAP THAT LASERMASTER SAYS.

BTW, you can pick up an excellent professionally built laser from DTR ;)
 
Joined
Mar 27, 2011
Messages
14,125
Points
113
Re: DAoO LASERMASTER 2.2W Beast "NOT" SCAM

Maybe it's just my sleep deprived coffee addled brain, but the title of this thread does not read correctly to me.

What I mean is "DAoO LASERMASTER 2.2W Beast "NOT" SCAM" makes it sound like it's not a scam... even with the quotations over the "not".

Would work better as just "DAoO LASERMASTER 2.2W Beast SCAM" imho.
 
Last edited:
Joined
Aug 30, 2010
Messages
1,595
Points
63
Re: DAoO LASERMASTER 2.2W Beast "NOT" SCAM

^ Hehe I agree (I've only started drinking this morning too)

I re-read the last several comments of this thread because it seems to imply DAoO is in fact 'not' a scammer - which clearly is not the case. Thanks for the chuckle Infinitus :beer:

PS - 'FAKE' tag added
 
Last edited:




Top