LPF Laser Pointer Company Database








Welcome to Laser Pointer Forums! If you are looking for a laser you may want to check out the database of laser pointer companies. The link will open in a new window for your convenience.

Green Laser Pointers Blue Laser Pointers Red Laser Pointers
Yellow Laser Pointers Violet Laser Pointers Orange Laser Pointers
Laser Pointers by Power - 1 Watt+ Laser Pointers by Power - 500mW+ Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes


























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Off-Topic > Geeks' Corner

LPF Database of Laser Pointer Companies






Reply
 
LinkBack Thread Tools Display Modes
Old 12-14-2013, 07:57 AM #577
Sigurthr's Avatar
Class 3B Laser
 
Join Date: Dec 2011
Location: Michigan's U.P.
Posts: 4,382
Rep Power: 630
Sigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond repute
Sigurthr Sigurthr is offline
Class 3B Laser
Sigurthr's Avatar
 
Join Date: Dec 2011
Location: Michigan's U.P.
Posts: 4,382
Rep Power: 630
Sigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond repute
Default Re: Tesla Coil Build Thread

Here's a teaser.

http://img23.imageshack.us/img23/9836/ovl1.png


I think it is just about ready to submit!

I gotta work on posting the schematic and BOM for you guys now...


__________________
Amateur Multispectral Photographer - [X-Ray, UV, Vis, IR]
Amateur Electrical Engineer
Autodidact
Tesla Coil Expert
Sigurthr is offline   Reply With Quote








Old 12-14-2013, 11:52 AM #578
Atomicrox's Avatar
Class 3R Laser
 
Join Date: Jun 2011
Posts: 2,120
Rep Power: 543
Atomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond repute
Atomicrox Atomicrox is offline
Class 3R Laser
Atomicrox's Avatar
 
Join Date: Jun 2011
Posts: 2,120
Rep Power: 543
Atomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond repute
Default Re: Tesla Coil Build Thread

Looking nice, Sig!

On a side matter, what do you guys think is the simplest SGTC setup using MOTs? I'm leaning towards building one in the near future. I want to use as fewer parts as possible (specially hard to find and/or build parts).
__________________
405nm: NewWish (29.1mW avg|5mW rtd) | Dilda (81.5mW avg|200mW rtd) | 501B by Blord (633mW pk)
low 445nm: C6 from Survival Lasers (1351mW pk|1289mW avg|1100mW rtd)
high 450nm: NewWish (12.6mW pk|5mW rtd) | Dominator by Blord (3010mW pk|2779mW avg during 5min)
462nm: 501B by Atomic (1507mW avg)
473nm: BWB-10-OEM labby by CNI (10mW rtd)
520nm: MXDL pen by DTR (31.6mW pk|28.8mW avg)
532nm: NewWish (28.6mW pk|26.8mW avg|10mW rtd) | Dapper (30.3mW pk) | Classic (120.0mW pk|103.1mW avg|100mW rtd) | "The Green Box" by Atomic (176.7mW pk|140.0mW avg)
589nm: Spartan from Dragon Lasers (58.4mW pk|37mW avg|50mW rtd)
632.8nm: HeNe pointer by Atomic (0.68mW rtd)
635nm: NewWish (4.6mW avg|5mW rtd)
638nm: Classic from Lazerer (409.3mW pk|389.4mW avg|415mW rtd)
650nm: NewWish (10.6mW pk|5mW rtd) | Dilda (216.3mW avg|200mW rtd)
685nm: laser-in-a-box by Atomic (30.4mW pk|29.3mW avg) | 501B by Atomic (32.4mW avg)
780nm: module (2.7mW avg|5mW rtd)
808nm: Classic modded from a 532nm (162mW avg)
850nm: module (8.8mW avg|7mW rtd)
980nm: NewWish (81mW pk|5mW rtd) | 2nd line around 490nm

5W Ophir LPM

HV: Flyback, Plasma Speaker, The Arcsynth and SSTC
Atomicrox is offline   Reply With Quote
Old 12-14-2013, 01:34 PM #579
Fiddy's Avatar
Class 3B Laser
 
Join Date: May 2011
Location: Down Under
Posts: 2,747
Rep Power: 272
Fiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond repute
Fiddy Fiddy is offline
Class 3B Laser
Fiddy's Avatar
 
Join Date: May 2011
Location: Down Under
Posts: 2,747
Rep Power: 272
Fiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond reputeFiddy has a reputation beyond repute
Default Re: Tesla Coil Build Thread

The board is pretty done ill let Sigurthr post some of the nice photos of the render
__________________
405nm - 1,910mW (6)
445nm - 15,895mW (15)
450nm - 370mW (2)
473nm - 110mW (2)
532nm - 1250mW (6)
632.8nm - 2mW (1)
637nm - 5105mW (8)
660nm - 1,850mW (5)
670nm - 600mW (1)
685nm - 40mW (1)
808nm - 2,700mW (3)
RGB - 400mW (1)

In Progress:
405nm - 500mW+ Kryton Groove
445nm - 2,000mW+ C-88
520nm - 50mW Ultrafire RL-118 SS
632.8nm - 0.5mW Mini HeNe

Safety Glasses
2x Eagle Pair OD4+ 190nm-540nm
2x Eagle Pair OD4+ 90-400nm & 580-760nm
OEM Lasers OD 5+ 190-435nm & 730-1085nm

LaserBee 5W Laser Power Meter


>Fiddy's Review/Tutorial/Build Compilation Thread<
>>FS: Custom Glow Rings<<
>>>Plasma Speaker Kits (High Frequency Audio Tesla Coil) reserve yours today!<<<

CajunLasers FTW!
Fiddy is offline   Reply With Quote
Old 12-14-2013, 03:04 PM #580
Speedy78's Avatar
Class 3R Laser
 
Join Date: Dec 2012
Location: Navarre, Fl
Posts: 2,084
Rep Power: 210
Speedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond repute
Speedy78 Speedy78 is offline
Class 3R Laser
Speedy78's Avatar
 
Join Date: Dec 2012
Location: Navarre, Fl
Posts: 2,084
Rep Power: 210
Speedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond repute
Default Re: Tesla Coil Build Thread

I hate being impatient! Lol
__________________
405nm Lazerer Polished Rifle 688mW
445nm Kryton Groove 1.6W~Sinner 3.3W
450nm Guidesman 1.2W
457.9nm ML Argon
473nm PL-E Pro 15mW
476.5nm ML Argon
488nm Uniphase Multi-Line Argon 48mW/73mW in current control;
496.5nm ML Argon
501.7nm ML Argon
514.5nm ML Argon
532nm SkyRay King Gre3n 35mW/60mW/70mW~Phobos Fasttech 70mW~Optotronics RPL-500 450mW~JetLasers Ti B 170mW
543.5nm Bare tube HeNe ~3mW (Nightstand lamp)
632.8nm Bare tube HeNe ~3mW~Bare tube HeNe Multimode 12mW (Desk Lamp)
638nm Mrcrouse Custom 650mW
658nm wannaburnstuff baby shower gift? 127mW
808nm Coherent CCP 10W

"Rather than offer you the illusion of free choice, I will take the liberty of choosing for you"
"The right man in the wrong place can make all the difference in the world."
-Gman
Speedy78 is offline   Reply With Quote
Old 12-14-2013, 05:02 PM #581
Seoul_lasers's Avatar
Class 3R Laser
 
Join Date: Jul 2008
Location: Victoria, British Columbia
Posts: 1,994
Rep Power: 414
Seoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond repute
Send a message via Skype™ to Seoul_lasers
Seoul_lasers Seoul_lasers is online now
Class 3R Laser
Seoul_lasers's Avatar
 
Join Date: Jul 2008
Location: Victoria, British Columbia
Posts: 1,994
Rep Power: 414
Seoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond repute
Send a message via Skype™ to Seoul_lasers
Exclamation Re: Tesla Coil Build Thread

Quote:
Originally Posted by Atomicrox View Post
Looking nice, Sig!

On a side matter, what do you guys think is the simplest SGTC setup using MOTs? I'm leaning towards building one in the near future. I want to use as fewer parts as possible (specially hard to find and/or build parts).
I am a co-inventor of the MMT ( Multi mot transformer-bank) so I am experienced with using MOTS in TC service....
*** However, I strongly discourage their use for beginning TC'ers as they are:
1) You have absolutely no second chances with MOTs, these are positively lethal in hands of inexperienced coilers due to their extremely high output currents.

2) poorly regulated (Secondary side ballasted with a large oil/paper filled capacitor) and can easily deliver well over 2A short circuited or until their windings catch fire!

3) You'll need at least a voltage tripler circuit to make any sort of working SGTC or carefully build MMT (multi mot-transformer).

4) When used ( in a 4 series) in a TC circuit they will require insulation oil and physical modification to make them run cooler. This requires the removal of their all their shunts and the complete removal of their low voltage filament windings. However this adds another layer of complexity to using them in a TC supply as you now essentially have a 4 x 2KVA pole pig needing ballasting via an shorted ARC welder. ( 1 gallon Shell dialex non detergent XMFR Oil is rather messy and quite expensive)

Sorry if I come across as being alarmist or condescending. I have had lots of experience around building TCs (SGTC). I have used Mots before and would never use them again. Period.


btw, the fellow in this video has balls of steel.
I have seen those caps CATO before pulling that much current. ( 15-20KW here? ).
An exploding cap bank can kill you from the flying sharp steel casing fragments.

__________________
650nm ~350mW DVD 20x diode RyanSoh3 Class IIIb
650nm ~350mW DVD 22x 3.5mm labby build 2010 Class IIIb
532nm 10mW-15mW DPSS Module IR filtered(S.Korea)RyanSoh3 Class IIIb
445nm 3.49W pk ~3.15W av. Sinner Cypreus II +DTR 9mm 445nm Class IV
445nm RHD Saber Twins 2.7W ~2.35W pk Class IV
445nm A140 module x2 Maxsink Class IV
405nm Daguin Kryton Groove SO6J 700mW build. Class IV
405nm Olike 560mW-600mW pen sold Scopeguy20
Class IV
337.1nm TEA Nitrogen laser project 2011 Class IIIb
---------------------------------------------------
Die4Drivers 1.3v lab laser/projector driver

Laserbee 3.2W Deluxe LPM
ARGMeter 1.1v
Ophir 20C-A sensor

Peregrine 1.5.0 is working now on MacOSX Yay!!

Last edited by Seoul_lasers; 12-14-2013 at 05:18 PM.
Seoul_lasers is online now   Reply With Quote
Old 12-14-2013, 06:44 PM #582
Atomicrox's Avatar
Class 3R Laser
 
Join Date: Jun 2011
Posts: 2,120
Rep Power: 543
Atomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond repute
Atomicrox Atomicrox is offline
Class 3R Laser
Atomicrox's Avatar
 
Join Date: Jun 2011
Posts: 2,120
Rep Power: 543
Atomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond repute
Default Re: Tesla Coil Build Thread

I have drawn arcs from MOTs before (from two in series and from a single resonant MOT) and I know how dangerous they are.

The thing is that I don't really have other good options:
-NSTs are too hard to find around here, too expensive when found and too heavy to order internationally.
-Flybacks, ignition coils and other "small" transformers are too limited, it's too much work to build a TC to get 10cm arcs, considering you could get similar sized arcs from the flyback without the TC.
-I don't think you can get a pole pig around here at all. At least I never heard of anyone getting one.
-I've built an SSTC, it worked but kept blowing up MOSFETs. I'll try again some day, probably when I buy a scope.

I'm willing to consider other options, if you know of any.

Are you sure you need at least a voltage tripler? I've seen many dual-MOT coils without voltage multipliers. That's what I have in mind, since I happen to have two MOTs here.

Won't removing the shunts increase the current and make the gap harder to quench?


Yeah, that guy is bat shit crazy. Nice video, though!
__________________
405nm: NewWish (29.1mW avg|5mW rtd) | Dilda (81.5mW avg|200mW rtd) | 501B by Blord (633mW pk)
low 445nm: C6 from Survival Lasers (1351mW pk|1289mW avg|1100mW rtd)
high 450nm: NewWish (12.6mW pk|5mW rtd) | Dominator by Blord (3010mW pk|2779mW avg during 5min)
462nm: 501B by Atomic (1507mW avg)
473nm: BWB-10-OEM labby by CNI (10mW rtd)
520nm: MXDL pen by DTR (31.6mW pk|28.8mW avg)
532nm: NewWish (28.6mW pk|26.8mW avg|10mW rtd) | Dapper (30.3mW pk) | Classic (120.0mW pk|103.1mW avg|100mW rtd) | "The Green Box" by Atomic (176.7mW pk|140.0mW avg)
589nm: Spartan from Dragon Lasers (58.4mW pk|37mW avg|50mW rtd)
632.8nm: HeNe pointer by Atomic (0.68mW rtd)
635nm: NewWish (4.6mW avg|5mW rtd)
638nm: Classic from Lazerer (409.3mW pk|389.4mW avg|415mW rtd)
650nm: NewWish (10.6mW pk|5mW rtd) | Dilda (216.3mW avg|200mW rtd)
685nm: laser-in-a-box by Atomic (30.4mW pk|29.3mW avg) | 501B by Atomic (32.4mW avg)
780nm: module (2.7mW avg|5mW rtd)
808nm: Classic modded from a 532nm (162mW avg)
850nm: module (8.8mW avg|7mW rtd)
980nm: NewWish (81mW pk|5mW rtd) | 2nd line around 490nm

5W Ophir LPM

HV: Flyback, Plasma Speaker, The Arcsynth and SSTC
Atomicrox is offline   Reply With Quote
Old 12-14-2013, 10:28 PM #583
Sigurthr's Avatar
Class 3B Laser
 
Join Date: Dec 2011
Location: Michigan's U.P.
Posts: 4,382
Rep Power: 630
Sigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond repute
Sigurthr Sigurthr is offline
Class 3B Laser
Sigurthr's Avatar
 
Join Date: Dec 2011
Location: Michigan's U.P.
Posts: 4,382
Rep Power: 630
Sigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond repute
Default Re: Tesla Coil Build Thread

It -can- be done with two mots (one as a ballast) and a voltage doubler, but no less than that; the air constriction of such close electrodes in the gap prevents quenching, if you can even build a gap to adjust finely enough for only 2.4kV.

I'd recommend for a SGTC beginner to work only with OBIT/NST just because things tend to go awry at least once, and once is all you get with MOTs. It isn't like arcing with a MOT when you make a MOT SGTC... should the secondary side ever arc to the primary side the arc will carry the full output of the primary with it; that is a resonant MOT's lethal current traveling on a normally harmless TC streamer.

But if you insist on trying a MOT based SGTC then do like you would do for a MOT based VTTC; only add enough voltage multiplier stages to reach about 10kV.
__________________
Amateur Multispectral Photographer - [X-Ray, UV, Vis, IR]
Amateur Electrical Engineer
Autodidact
Tesla Coil Expert
Sigurthr is offline   Reply With Quote
Old 12-15-2013, 03:19 AM #584
Seoul_lasers's Avatar
Class 3R Laser
 
Join Date: Jul 2008
Location: Victoria, British Columbia
Posts: 1,994
Rep Power: 414
Seoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond repute
Send a message via Skype™ to Seoul_lasers
Seoul_lasers Seoul_lasers is online now
Class 3R Laser
Seoul_lasers's Avatar
 
Join Date: Jul 2008
Location: Victoria, British Columbia
Posts: 1,994
Rep Power: 414
Seoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond repute
Send a message via Skype™ to Seoul_lasers
Exclamation Re: Tesla Coil Build Thread

Quote:
Originally Posted by Sigurthr View Post
It -can- be done with two mots (one as a ballast) and a voltage doubler, but no less than that; the air constriction of such close electrodes in the gap prevents quenching, if you can even build a gap to adjust finely enough for only 2.4kV.

I'd recommend for a SGTC beginner to work only with OBIT/NST just because things tend to go awry at least once, and once is all you get with MOTs. It isn't like arcing with a MOT when you make a MOT SGTC... should the secondary side ever arc to the primary side the arc will carry the full output of the primary with it; that is a resonant MOT's lethal current traveling on a normally harmless TC streamer.

But if you insist on trying a MOT based SGTC then do like you would do for a MOT based VTTC; only add enough voltage multiplier stages to reach about 10kV.
Yes right, however in doing a dual mot setup + voltage doubler route you'll need 230-240Vac and join the XMFR cases together to ground.
I tried this, it didn't run too well because of the problem you've just pointed out above, quenching. Flame (arc) outs were pretty common until moving to a RSG. (rotary spark gaps are an entirely different beast all together) - Really a Pain in the arse to set up. The other problem with RSPRKGaps are failing electrodes flying off and hitting things. At 7500RPM they fly off and travel ~300Km/hr. I got some nice holes in my garage in Canada from failed electrodes. Once we bolted (locked) them on a Phenolic disk this problem was solved.

See the link below. This coil in Singapore uses a very similar setup to our mot supply.
Notice that the doubler circuit diagram shows the use of filtering chokes.

http://www.loneoceans.com/labs/teslacoil2/

Our electrodes were ZrW, and melted down quickly due the the high current. We used a 170nF 35Kv rated cap.
Might have been a little excessive.

Obits will burn themselves out after a few runs. They tend to die quickly due to their thin windings.
Neons are pretty much the best you can get bang for buck wise.
__________________
650nm ~350mW DVD 20x diode RyanSoh3 Class IIIb
650nm ~350mW DVD 22x 3.5mm labby build 2010 Class IIIb
532nm 10mW-15mW DPSS Module IR filtered(S.Korea)RyanSoh3 Class IIIb
445nm 3.49W pk ~3.15W av. Sinner Cypreus II +DTR 9mm 445nm Class IV
445nm RHD Saber Twins 2.7W ~2.35W pk Class IV
445nm A140 module x2 Maxsink Class IV
405nm Daguin Kryton Groove SO6J 700mW build. Class IV
405nm Olike 560mW-600mW pen sold Scopeguy20
Class IV
337.1nm TEA Nitrogen laser project 2011 Class IIIb
---------------------------------------------------
Die4Drivers 1.3v lab laser/projector driver

Laserbee 3.2W Deluxe LPM
ARGMeter 1.1v
Ophir 20C-A sensor

Peregrine 1.5.0 is working now on MacOSX Yay!!

Last edited by Seoul_lasers; 12-15-2013 at 11:24 AM.
Seoul_lasers is online now   Reply With Quote
Old 12-15-2013, 09:07 AM #585
Sigurthr's Avatar
Class 3B Laser
 
Join Date: Dec 2011
Location: Michigan's U.P.
Posts: 4,382
Rep Power: 630
Sigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond repute
Sigurthr Sigurthr is offline
Class 3B Laser
Sigurthr's Avatar
 
Join Date: Dec 2011
Location: Michigan's U.P.
Posts: 4,382
Rep Power: 630
Sigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond repute
Default Re: Tesla Coil Build Thread

Those pancake chokes are ingenious! Never would have thought about winding them that way. That is a really nice coil, really cleanly built.

Yep, projectile electrodes is one of the reasons I swore off RSG's. Noise was the other main reason.

I've had luck with OBITs by running multiple in parallel and capacitively balasting them to limit current. It was a mess of wires that I never finalized into a neat form, but they held up well for many long runs. I eventually sold them off for cheap when I got my hands on a solid NST.

Btw, I still have connections to someone who had a SURPLUS of nonGFCI NSTs. Idk how much international shipping would run you on them, but he used to sell them for under $40 a pop for 12k/60s, which was a steal in and of itself.
__________________
Amateur Multispectral Photographer - [X-Ray, UV, Vis, IR]
Amateur Electrical Engineer
Autodidact
Tesla Coil Expert
Sigurthr is offline   Reply With Quote
Old 12-15-2013, 12:47 PM #586
Atomicrox's Avatar
Class 3R Laser
 
Join Date: Jun 2011
Posts: 2,120
Rep Power: 543
Atomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond repute
Atomicrox Atomicrox is offline
Class 3R Laser
Atomicrox's Avatar
 
Join Date: Jun 2011
Posts: 2,120
Rep Power: 543
Atomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond repute
Default Re: Tesla Coil Build Thread

That's a great coil, man!
I was thinking of doing something similar to that.
Maybe using a "propeller" style ARSG instead of a disc.
I'm also thinking about not using a doubler. People on the pupman list say the diodes tend to blow up often. Not to mention 4x the amount of MMC caps.

Every now and then a member of the pupman list sells cheap NSTs around $30-50 but every time I checked shipping would double the price (not to mention the high chance of customs trouble with something that heavy).
__________________
405nm: NewWish (29.1mW avg|5mW rtd) | Dilda (81.5mW avg|200mW rtd) | 501B by Blord (633mW pk)
low 445nm: C6 from Survival Lasers (1351mW pk|1289mW avg|1100mW rtd)
high 450nm: NewWish (12.6mW pk|5mW rtd) | Dominator by Blord (3010mW pk|2779mW avg during 5min)
462nm: 501B by Atomic (1507mW avg)
473nm: BWB-10-OEM labby by CNI (10mW rtd)
520nm: MXDL pen by DTR (31.6mW pk|28.8mW avg)
532nm: NewWish (28.6mW pk|26.8mW avg|10mW rtd) | Dapper (30.3mW pk) | Classic (120.0mW pk|103.1mW avg|100mW rtd) | "The Green Box" by Atomic (176.7mW pk|140.0mW avg)
589nm: Spartan from Dragon Lasers (58.4mW pk|37mW avg|50mW rtd)
632.8nm: HeNe pointer by Atomic (0.68mW rtd)
635nm: NewWish (4.6mW avg|5mW rtd)
638nm: Classic from Lazerer (409.3mW pk|389.4mW avg|415mW rtd)
650nm: NewWish (10.6mW pk|5mW rtd) | Dilda (216.3mW avg|200mW rtd)
685nm: laser-in-a-box by Atomic (30.4mW pk|29.3mW avg) | 501B by Atomic (32.4mW avg)
780nm: module (2.7mW avg|5mW rtd)
808nm: Classic modded from a 532nm (162mW avg)
850nm: module (8.8mW avg|7mW rtd)
980nm: NewWish (81mW pk|5mW rtd) | 2nd line around 490nm

5W Ophir LPM

HV: Flyback, Plasma Speaker, The Arcsynth and SSTC
Atomicrox is offline   Reply With Quote
Old 12-15-2013, 07:39 PM #587
Speedy78's Avatar
Class 3R Laser
 
Join Date: Dec 2012
Location: Navarre, Fl
Posts: 2,084
Rep Power: 210
Speedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond repute
Speedy78 Speedy78 is offline
Class 3R Laser
Speedy78's Avatar
 
Join Date: Dec 2012
Location: Navarre, Fl
Posts: 2,084
Rep Power: 210
Speedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond repute
Default Re: Tesla Coil Build Thread

A little Christmas music!

Hung two bulbs in the tree but the really neat part was the string of LED lights in the tree lit up. I guess the E-field was able to induce a current in that line to light them? Even the star at the top of the tree was getting some current and would light up.

Tried my best to sync it to the actually song. Had to slow the coils audio track down to match the song.

Anyway enjoy!
__________________
405nm Lazerer Polished Rifle 688mW
445nm Kryton Groove 1.6W~Sinner 3.3W
450nm Guidesman 1.2W
457.9nm ML Argon
473nm PL-E Pro 15mW
476.5nm ML Argon
488nm Uniphase Multi-Line Argon 48mW/73mW in current control;
496.5nm ML Argon
501.7nm ML Argon
514.5nm ML Argon
532nm SkyRay King Gre3n 35mW/60mW/70mW~Phobos Fasttech 70mW~Optotronics RPL-500 450mW~JetLasers Ti B 170mW
543.5nm Bare tube HeNe ~3mW (Nightstand lamp)
632.8nm Bare tube HeNe ~3mW~Bare tube HeNe Multimode 12mW (Desk Lamp)
638nm Mrcrouse Custom 650mW
658nm wannaburnstuff baby shower gift? 127mW
808nm Coherent CCP 10W

"Rather than offer you the illusion of free choice, I will take the liberty of choosing for you"
"The right man in the wrong place can make all the difference in the world."
-Gman

Last edited by Speedy78; 12-15-2013 at 07:41 PM.
Speedy78 is offline   Reply With Quote
Old 12-15-2013, 07:58 PM #588
Flaminpyro's Avatar
Class 4 Laser
 
Join Date: May 2009
Location: West central Oregon
Posts: 5,458
Rep Power: 860
Flaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond repute
Flaminpyro Flaminpyro is online now
Class 4 Laser
Flaminpyro's Avatar
 
Join Date: May 2009
Location: West central Oregon
Posts: 5,458
Rep Power: 860
Flaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond reputeFlaminpyro has a reputation beyond repute
Default Re: Tesla Coil Build Thread

Wow that's a good one Speedy I will rep you when it will let me
__________________
White Fusion Time Machine 445
473nm LRS-0473-KFM-00150-10 158.5mW Lab style
laser used in the making of the latest TRON movie

CNI PGL-III-C-589 125mW
520 in a SH-032
Viasho 532nm 500mW
CNI pen 532nm 84mW
The Violet Pip Squeek 45mW

_____________________________________
LOOKING FOR A HOST WITH PERFECT HEAT SINKING
order your C-88 Cu kit today !

Flaminpyro is online now   Reply With Quote
Old 12-15-2013, 09:09 PM #589
Atomicrox's Avatar
Class 3R Laser
 
Join Date: Jun 2011
Posts: 2,120
Rep Power: 543
Atomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond repute
Atomicrox Atomicrox is offline
Class 3R Laser
Atomicrox's Avatar
 
Join Date: Jun 2011
Posts: 2,120
Rep Power: 543
Atomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond reputeAtomicrox has a reputation beyond repute
Default Re: Tesla Coil Build Thread

Fantastic work! The forum won't let me rep you either
__________________
405nm: NewWish (29.1mW avg|5mW rtd) | Dilda (81.5mW avg|200mW rtd) | 501B by Blord (633mW pk)
low 445nm: C6 from Survival Lasers (1351mW pk|1289mW avg|1100mW rtd)
high 450nm: NewWish (12.6mW pk|5mW rtd) | Dominator by Blord (3010mW pk|2779mW avg during 5min)
462nm: 501B by Atomic (1507mW avg)
473nm: BWB-10-OEM labby by CNI (10mW rtd)
520nm: MXDL pen by DTR (31.6mW pk|28.8mW avg)
532nm: NewWish (28.6mW pk|26.8mW avg|10mW rtd) | Dapper (30.3mW pk) | Classic (120.0mW pk|103.1mW avg|100mW rtd) | "The Green Box" by Atomic (176.7mW pk|140.0mW avg)
589nm: Spartan from Dragon Lasers (58.4mW pk|37mW avg|50mW rtd)
632.8nm: HeNe pointer by Atomic (0.68mW rtd)
635nm: NewWish (4.6mW avg|5mW rtd)
638nm: Classic from Lazerer (409.3mW pk|389.4mW avg|415mW rtd)
650nm: NewWish (10.6mW pk|5mW rtd) | Dilda (216.3mW avg|200mW rtd)
685nm: laser-in-a-box by Atomic (30.4mW pk|29.3mW avg) | 501B by Atomic (32.4mW avg)
780nm: module (2.7mW avg|5mW rtd)
808nm: Classic modded from a 532nm (162mW avg)
850nm: module (8.8mW avg|7mW rtd)
980nm: NewWish (81mW pk|5mW rtd) | 2nd line around 490nm

5W Ophir LPM

HV: Flyback, Plasma Speaker, The Arcsynth and SSTC
Atomicrox is offline   Reply With Quote
Old 12-15-2013, 09:14 PM #590
Speedy78's Avatar
Class 3R Laser
 
Join Date: Dec 2012
Location: Navarre, Fl
Posts: 2,084
Rep Power: 210
Speedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond repute
Speedy78 Speedy78 is offline
Class 3R Laser
Speedy78's Avatar
 
Join Date: Dec 2012
Location: Navarre, Fl
Posts: 2,084
Rep Power: 210
Speedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond reputeSpeedy78 has a reputation beyond repute
Default Re: Tesla Coil Build Thread

I need a better camera than my 3 year old go pro. Works fantastic outside but in dimly lit areas or inside at all really its so fuzzy and grainy.
__________________
405nm Lazerer Polished Rifle 688mW
445nm Kryton Groove 1.6W~Sinner 3.3W
450nm Guidesman 1.2W
457.9nm ML Argon
473nm PL-E Pro 15mW
476.5nm ML Argon
488nm Uniphase Multi-Line Argon 48mW/73mW in current control;
496.5nm ML Argon
501.7nm ML Argon
514.5nm ML Argon
532nm SkyRay King Gre3n 35mW/60mW/70mW~Phobos Fasttech 70mW~Optotronics RPL-500 450mW~JetLasers Ti B 170mW
543.5nm Bare tube HeNe ~3mW (Nightstand lamp)
632.8nm Bare tube HeNe ~3mW~Bare tube HeNe Multimode 12mW (Desk Lamp)
638nm Mrcrouse Custom 650mW
658nm wannaburnstuff baby shower gift? 127mW
808nm Coherent CCP 10W

"Rather than offer you the illusion of free choice, I will take the liberty of choosing for you"
"The right man in the wrong place can make all the difference in the world."
-Gman
Speedy78 is offline   Reply With Quote
Old 12-15-2013, 11:04 PM #591
Sigurthr's Avatar
Class 3B Laser
 
Join Date: Dec 2011
Location: Michigan's U.P.
Posts: 4,382
Rep Power: 630
Sigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond repute
Sigurthr Sigurthr is offline
Class 3B Laser
Sigurthr's Avatar
 
Join Date: Dec 2011
Location: Michigan's U.P.
Posts: 4,382
Rep Power: 630
Sigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond reputeSigurthr has a reputation beyond repute
Default Re: Tesla Coil Build Thread

Haha nice work! Gotta love e-field propagation!
__________________
Amateur Multispectral Photographer - [X-Ray, UV, Vis, IR]
Amateur Electrical Engineer
Autodidact
Tesla Coil Expert
Sigurthr is offline   Reply With Quote
Old 12-16-2013, 12:18 AM #592
Seoul_lasers's Avatar
Class 3R Laser
 
Join Date: Jul 2008
Location: Victoria, British Columbia
Posts: 1,994
Rep Power: 414
Seoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond repute
Send a message via Skype™ to Seoul_lasers
Seoul_lasers Seoul_lasers is online now
Class 3R Laser
Seoul_lasers's Avatar
 
Join Date: Jul 2008
Location: Victoria, British Columbia
Posts: 1,994
Rep Power: 414
Seoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond reputeSeoul_lasers has a reputation beyond repute
Send a message via Skype™ to Seoul_lasers
Lightbulb Re: Tesla Coil Build Thread

Nice coil!!

A video showing sparks to a grounded object with music would be nice as well!

+1 rep for you!
__________________
650nm ~350mW DVD 20x diode RyanSoh3 Class IIIb
650nm ~350mW DVD 22x 3.5mm labby build 2010 Class IIIb
532nm 10mW-15mW DPSS Module IR filtered(S.Korea)RyanSoh3 Class IIIb
445nm 3.49W pk ~3.15W av. Sinner Cypreus II +DTR 9mm 445nm Class IV
445nm RHD Saber Twins 2.7W ~2.35W pk Class IV
445nm A140 module x2 Maxsink Class IV
405nm Daguin Kryton Groove SO6J 700mW build. Class IV
405nm Olike 560mW-600mW pen sold Scopeguy20
Class IV
337.1nm TEA Nitrogen laser project 2011 Class IIIb
---------------------------------------------------
Die4Drivers 1.3v lab laser/projector driver

Laserbee 3.2W Deluxe LPM
ARGMeter 1.1v
Ophir 20C-A sensor

Peregrine 1.5.0 is working now on MacOSX Yay!!
Seoul_lasers is online now   Reply With Quote
Reply

Tags
coil, nikola, resonant, tesla, transformer





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


LinkBacks (?)
LinkBack to this Thread: http://laserpointerforums.com/f60/tesla-coil-build-thread-73702.html
Posted By For Type Date
camper: Tesla Coil Build Thread - Page 3 - Laser Pointers This thread Refback 11-12-2015 12:06 PM
????? ???????? ? ???????? ???? - ????? ? ????? ? ??????? This thread Refback 05-11-2015 06:40 AM
ؿ SDRAM̿ؼ ϴµ..Ÿ ȸ : ̹ α This thread Refback 04-16-2015 02:23 PM
ѻ : ̹ α This thread Refback 04-15-2015 03:19 AM
̹ α : Ʈ Comment Ʈ This thread Refback 04-14-2015 04:33 AM
Форум РадиоКот Просмотр темы - Качер и опыты с качером This thread Refback 01-30-2015 07:03 PM










Loading








Top 50 Laser Pointer Companies - Green Lasers Top 50 Laser Pointer Companies - Blue Lasers Top 50 Laser Pointer Companies - Red Lasers
Top 50 Laser Pointer Companies - Yellow Lasers Top 50 Laser Pointer Companies - Purple Lasers Top 50 Laser Pointer Companies - Orange Lasers
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes




Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 10:08 AM.


Powered by: vBulletin
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2016 Laser Pointer Forums, LLC