Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

The whole Defective LD was my error

Joined
Aug 26, 2007
Messages
334
Points
0
Upon further tests, i have found that Senkat diode is in perfect working condition.

He is a great sales person and everyone should buy from him ;D


as for Deadals circuit. Its not working right, but thats on my part.

When I got Deadals regulator, I accidentally pulled on the wire too hard and it came off. I had to re-solder new ones on.


He has done a great job on the regulator and the packaging. And even proved it worked before he sent it out.

I found that something came disconnected in the process of re-soldering new wires on.

I'm repairing that now so sorry for the confusion.



I'm sorry I jumped all over Senkat and Deadal. I should investigate the problem better and not blame people suddenly.

...Especially not moderators ;D
 





Daedal

0
Joined
May 23, 2007
Messages
2,277
Points
0
Phazonx, this is not how LPF works. I appreciate you clearing it out, but to anyone interested, I never asked you to say this. I honestly do not like to use any of the Mod features on the board and rarely do. This is a free board and you can say what you damn well please.

Pleas understand that there is a reputation to be held up on my side and on SenKat's. There are many people who are entrusting both of us with a lot of money. A single claim as such is taken personally only because it is truly not what we intend to do. SenKat and myself are not making any money off of these sales, and only intend to be helpful to the rest of the board.

The truth is that I have done everything possible to make sure the circuit gets to you in perfect condition. If there is any problem with the circuit, please send it back for a whole new replacement.

Sorry you had such problems with your circuit.

--DDL
 

Gazoo

0
Joined
Jun 9, 2007
Messages
3,206
Points
38
My thoughts...PM first and then wait patiently for a reply. If you do not receive a reply within 24 hours, then send a friendly PM as a reminder. I know for a fact both Daedal and Senkat will work with anyone having trouble. It is a matter of how you approach people...in other words always try to be polite..

If only I could practice what I preach... ;D
 
Joined
Jan 7, 2007
Messages
6,309
Points
83
Weeellll as for that SenKat diode ------

I had another one fail :mad: Of course it was running at only 420 mA at the time ;D I was running my "teflon tape test" and that was all the poor diode could do. RIP :( Chalk up another to learning ...

Mike
 
Joined
Jan 7, 2007
Messages
6,309
Points
83
Phaze --

I posted the use of a little teflon tape on the threads of an Aixiz module to tighten the adjustment several months ago. One experimenter had some shards of this tape fuse to the window of his LD damaging it.
I was trying to see if the teflon tape I used could even possibly melt or burn in red laser light. I pushed the LD to the max and it gave its last photon :'(

Mike
 




Top