Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Payments Stage | GB | New CNC Machined Custom Designed Host for $18

Joined
Sep 20, 2013
Messages
17,254
Points
113
Re: Feeler | New CNC Machined Custom Designed Host for $18

I am here to take orders and answer questions all day today. Thanks.
 





Joined
Jul 20, 2011
Messages
723
Points
28
Re: Feeler | New CNC Machined Custom Designed Host for $18

im in for 2 X plug n burn coper heads :D should i add myself to the sheet or are you guys doing it?
 
Joined
Sep 20, 2013
Messages
17,254
Points
113
Re: Feeler | New CNC Machined Custom Designed Host for $18

im in for 2 X plug n burn coper heads :D should i add myself to the sheet or are you guys doing it?

Does this mean you want the contact board installed for you? That costs $2.00 for each host. I will put you down for the contact boards installed because you said you want it to plug and burn. If you don't want this option, let me know and I will change it. I am the only one who can change the spreadsheet, so I will have to do that, but you can go there and see it with the link in the OP. Thanks, Paul
 

Jstr

0
Joined
Feb 10, 2014
Messages
347
Points
0
Re: Feeler | New CNC Machined Custom Designed Host for $18

I'll take one black matte and one with the copper clear coated (if possible). Both with the copper heatsinks, please.

Thanks!
 
Joined
Sep 20, 2013
Messages
17,254
Points
113
Re: Feeler | New CNC Machined Custom Designed Host for $18

Jstrawn, you are on the spreadsheet. I am not sure about the clear coat, but I put it on there for now. Thank you for participating.
 
Joined
Mar 30, 2012
Messages
1,321
Points
0
Re: Feeler | New CNC Machined Custom Designed Host for $18

Tomorrow I will have more details about a clear coat option.

:)
 
Joined
Jun 22, 2011
Messages
2,431
Points
83
Re: Feeler | New CNC Machined Custom Designed Host for $18

Sounds good, I'm not sure I need 2-3 hosts right now but will keep an eye on this and maybe get in before it closes, specially if the copper clear coat is available/cheap.
 
Joined
Sep 20, 2013
Messages
17,254
Points
113
Re: Feeler | New CNC Machined Custom Designed Host for $18

Thanks, Atomicrox. Everyone is welcome. I believe we need 60 more hosts to make this group buy happen. So, if anyone is on the fence, ask me any questions you might have and maybe before the close of this group buy we can get you on board.
 
Joined
Dec 12, 2012
Messages
854
Points
63
Re: Feeler | New CNC Machined Custom Designed Host for $18

I just did a quick measurement of my Kryton Groove, 25mm diameter and 152mm long without focus adapter and 158mm with.
So this new host should be wider and shorter.

I'm considering getting some.

Are all the switch parts included in the price? How wide are the decorative fins on the head.
 
Last edited:
Joined
Sep 20, 2013
Messages
17,254
Points
113
Re: Feeler | New CNC Machined Custom Designed Host for $18

Mattronium, yes all the switch parts are included and the contact board as well. The host head doesn't have fins in it. It does have 4 groves cut into the heat sink and is a solid piece of copper with the 12mm opening for a module. There are other options that can be had for a little more money. You can find all this among the post in this thread and in the OP.
 
Last edited:
Joined
Mar 30, 2012
Messages
1,321
Points
0
Re: Feeler | New CNC Machined Custom Designed Host for $18

I just did a quick measurement of my Kryton Groove, 25mm diameter and 152mm long without focus adapter and 158mm with.
So this new host should be wider and shorter.

I'm considering getting some.

Are all the switch parts included in the price? How wide are the decorative fins on the head.

The fins on the head are just grooves. They are for decoration. about 1mm wide.

I have these grooves on my Arcane 2.0 host. They look very nice with that dimensions.

Again , if you have suggestions let me know. We can add / change the host a bit if everyone agree.

:beer:
 
Joined
Sep 20, 2013
Messages
17,254
Points
113
Re: Feeler | New CNC Machined Custom Designed Host for $18

Hello everyone. I am here all day to take orders and answer questions. Feel free to post any questions or order you might have.
 
Joined
Mar 30, 2012
Messages
1,321
Points
0
Re: Feeler | New CNC Machined Custom Designed Host for $18

Hi Everyone ,

Paul asked me about inserting the whole Aixiz module to the heatsink.

After some checks , We will add 15mm extra to the host length. So total length would be around 135mm total instead of 120mm.

Same price :beer:
 
Joined
Sep 20, 2013
Messages
17,254
Points
113
Re: Feeler | New CNC Machined Custom Designed Host for $18

This means that there is enough room in the heat sink to put a full length AixiZ type module in and still have room for the contact board. This will not only increase the length of the host to 135mm, but it will also increase the amount of heat that can be pulled out of the module, making the duty cycle even longer than it was before this change.
 
Joined
Jul 4, 2012
Messages
2,834
Points
63
Re: Feeler | New CNC Machined Custom Designed Host for $18

How much room in the "pill" is there for a driver? Or does it need to be soldered to the diode?
 
Joined
Apr 26, 2010
Messages
4,175
Points
83
Re: Feeler | New CNC Machined Custom Designed Host for $18

I'll take 3 :)

1 as a white matte, another black matte, and a third with the copper upgrade and mirror polished :)
 




Top